Ok, will doIzzo wrote:Honestly, I think you might get a better response via private message or email to him. He's usually on late and I'm not sure he's still tracking this...but I could be wrong....wouldn't hurt to try and reach him. This thread was started when the demo was released. Good luck.
Need all your help with BF2 crash data analysis
-
Spiderman60
I have played this game since last October, never had a single problem, that's until I downloaded v1.3, what a mess they have made, click join " it ctd ", get into a game goes good untill the next round than I get a "Your connection to the server has been lost" and goes back to the server list, does not crash though, anyhow the main reason for this message is to maybe ? help everyone who is getting totally you know what, like I have been for the last week, ready to go off my nut, I really hope this helps.
When you first go to play a game you have to click join, chances for me was 50 - 50 of a ctd, if or once you get into a game and it finishes and is ready to start the next round DO NOT PRESS JOIN, let the computer load itself into the next game, takes a little longer to do all you have to do than is choose your weapon etc, and press done, I have not been able to play many maps, until tonight I tried this out and ended up playing 14 games without a clitch or ctd, made my night will sleep in peace, let me know if this works for you. does this mean that there is a problem only when you click on the join button.
Spiderman60
When you first go to play a game you have to click join, chances for me was 50 - 50 of a ctd, if or once you get into a game and it finishes and is ready to start the next round DO NOT PRESS JOIN, let the computer load itself into the next game, takes a little longer to do all you have to do than is choose your weapon etc, and press done, I have not been able to play many maps, until tonight I tried this out and ended up playing 14 games without a clitch or ctd, made my night will sleep in peace, let me know if this works for you. does this mean that there is a problem only when you click on the join button.
Spiderman60
Been playing the game since it came out.
I don't have the lost connection issue but several of my clanmates do.
I do ctd on clicking the join button this has started happening after 1.3 but does'nt seem to have any regularity to it. I usually reboot after it happens then rejoin with no further problems.
I seen the original heading for this thread and wanted to offer my dmp file for examination. I have never reinstalled the game since initial install each patch was done incrementally but I ended up installing the full 1.3 over top of the incremental 1.3 in the hopes of fixing my issue sadly didnt work.
Here is everything from my dmp file zipped up and ready to go
http://webpages.charter.net/gravyskicks/dmp.zip
BTW I'm =KHA= Gravy from http://www.KrackHouse.net
we have a 24/7 Wake ranked server and an SF ranked server up and going both are setup for forty players and are pretty heavily admined to keep the idiots at arm length.
I don't have the lost connection issue but several of my clanmates do.
I do ctd on clicking the join button this has started happening after 1.3 but does'nt seem to have any regularity to it. I usually reboot after it happens then rejoin with no further problems.
I seen the original heading for this thread and wanted to offer my dmp file for examination. I have never reinstalled the game since initial install each patch was done incrementally but I ended up installing the full 1.3 over top of the incremental 1.3 in the hopes of fixing my issue sadly didnt work.
Here is everything from my dmp file zipped up and ready to go
http://webpages.charter.net/gravyskicks/dmp.zip
BTW I'm =KHA= Gravy from http://www.KrackHouse.net
we have a 24/7 Wake ranked server and an SF ranked server up and going both are setup for forty players and are pretty heavily admined to keep the idiots at arm length.
Spiderman60 wrote:I have played this game since last October, never had a single problem, that's until I downloaded v1.3, what a mess they have made, click join " it ctd ", get into a game goes good untill the next round than I get a "Your connection to the server has been lost" and goes back to the server list, does not crash though, anyhow the main reason for this message is to maybe ? help everyone who is getting totally you know what, like I have been for the last week, ready to go off my nut, I really hope this helps.
When you first go to play a game you have to click join, chances for me was 50 - 50 of a ctd, if or once you get into a game and it finishes and is ready to start the next round DO NOT PRESS JOIN, let the computer load itself into the next game, takes a little longer to do all you have to do than is choose your weapon etc, and press done, I have not been able to play many maps, until tonight I tried this out and ended up playing 14 games without a clitch or ctd, made my night will sleep in peace, let me know if this works for you. does this mean that there is a problem only when you click on the join button.
Spiderman60
if you used the incremental patch try resinstalling with the full version
Offensive
Hi all
I been looking for a fix on BF2 crash for a while now
I have the same Issue BF2 crashes to desktop while playing some times its 2 min sometimes it 30 min
I seen a lot of post but none have any real answer
I have tried everything to fix this problem with out any success
I have P4 3.0 2 gig DDR duel ati x700 256 patch 1.3
Has anyone found thing to help yet?
have about 15 dumps file
I been looking for a fix on BF2 crash for a while now
I have the same Issue BF2 crashes to desktop while playing some times its 2 min sometimes it 30 min
I seen a lot of post but none have any real answer
I have tried everything to fix this problem with out any success
I have P4 3.0 2 gig DDR duel ati x700 256 patch 1.3
Has anyone found thing to help yet?
have about 15 dumps file
oddball wrote:Hi all
I been looking for a fix on BF2 crash for a while now
I have the same Issue BF2 crashes to desktop while playing some times its 2 min sometimes it 30 min
I seen a lot of post but none have any real answer
I have tried everything to fix this problem with out any success
I have P4 3.0 2 gig DDR duel ati x700 256 patch 1.3
Has anyone found thing to help yet?
have about 15 dumps file
When you patched your game most recently ...did you use the incremental patch or full ?
Offensive
oddball wrote:Hi all
I been looking for a fix on BF2 crash for a while now
I have the same Issue BF2 crashes to desktop while playing some times its 2 min sometimes it 30 min
I seen a lot of post but none have any real answer
I have tried everything to fix this problem with out any success
I have P4 3.0 2 gig DDR duel ati x700 256 patch 1.3
Has anyone found thing to help yet?
have about 15 dumps file
might want to change your graphics driver.. ya running the latest Cats?
-
VinnieDude
BF2 Error
colinhunt wrote:Here's one more, zipped (17KB).
BF2 crashes randomly to desktop, usually after 5-15 minutes of online play. Singleplayer with bots works a lot better, I can sometimes play for an hour without any problems. Singleplayer also doesn't crash to desktop, but the game freezes and graphics get futzed up (most of the screen turns black). Tapping ESC turns the entire screen black for a minute or so, and then the game re-appears and I can usually continue like nothing had happened. Have also had a singleplayer crash where screen turns totally black but I can hear the game sounds like nothing's wrong.
cheers,
:: colin
I have the same (bf2demo).
I tried to play bf in a window, and instead of just disapearing, i get errors, not one particular error, but everytime it's it says something else. The only things that are the same is that the one time it is the 'Particle System', and the other time 'RendDX9':
2 examples of the so many different errors i get:
1:
BF2 Error
Debug assertion failed!
Version: 1.0.2446.12 Build date:2005-6-7 15:42
Module: ParticleSystem
File:c:\dice\Projects\BF2Branches\BF2Demo\Code\BF2\Geom\ParticleSystem\Trailrenderer.cpp
Line: 645
Text: LockFailed
Current confile:
2:
BF2 Error
Debug assertion failed!
Version: 1.0.2446.12 Build date:2005-6-7 15:42
Module: RendDX9
File:c:\dice\Projects\BF2Branches\BF2Demo\Code\BF2\RendDX9\ShaderManager.cpp
Line: 108
Text: Previous effect: shaders/NonScreenAlignedParticles not ended.
Current confile:
Can someone help me out?
- YeOldeStonecat
- SG VIP
- Posts: 51171
- Joined: Mon Jan 15, 2001 12:00 pm
- Location: Somewhere along the shoreline in New England
- ZB_Freakzilla
- New Member
- Posts: 13
- Joined: Fri Dec 03, 2004 1:22 pm
- Location: Buffalo
-
VinnieDude
My Computer
some information about my PC:
System:
Processor: Intel® Pentium® 4 CPU 3.00GHz
Operating system Windows XP (Service Pack 2)
DirectX Version: DirectX 9.0C
Graphic card information
Graphic processor: GeForce 6200SE TurboCache(TM)
Video BIOS-version: 5.44.02.37.10
IRQ: 18
Bustype: PCI Express x16
Memory: 256 MB
ForceWare-version: 81.94
Type TV-encoder: NVIDIA-integrated
I don't know if there are any updates avaliable?
PS: all is translated from dutch, don't mind the spell
System:
Processor: Intel® Pentium® 4 CPU 3.00GHz
Operating system Windows XP (Service Pack 2)
DirectX Version: DirectX 9.0C
Graphic card information
Graphic processor: GeForce 6200SE TurboCache(TM)
Video BIOS-version: 5.44.02.37.10
IRQ: 18
Bustype: PCI Express x16
Memory: 256 MB
ForceWare-version: 81.94
Type TV-encoder: NVIDIA-integrated
I don't know if there are any updates avaliable?
PS: all is translated from dutch, don't mind the spell
VinnieDude wrote:some information about my PC:
System:
Processor: Intel® Pentium® 4 CPU 3.00GHz
Operating system Windows XP (Service Pack 2)
DirectX Version: DirectX 9.0C
Graphic card information
Graphic processor: GeForce 6200SE TurboCache(TM)
Video BIOS-version: 5.44.02.37.10
IRQ: 18
Bustype: PCI Express x16
Memory: 256 MB
ForceWare-version: 81.94
Type TV-encoder: NVIDIA-integrated
I don't know if there are any updates avaliable?
PS: all is translated from dutch, don't mind the spell
You definately need a driver update and is the video integrated into your motherboard?
go here
http://www.guru3d.com/
Naw he needs a better graphics card 6200 isn't going to cut it and is prob taking a massive beating.Izzo wrote:You definately need a driver update and is the video integrated into your motherboard?
go here
http://www.guru3d.com/
Hi,
This is my first post.
I never had crashes back to desktop or things like that. But since 1.4 i got alot ctd.
It is always the same. I play a round or two. But i ctd at the very latest third or fourth round. I wasnt able to play more than three rounds in a row since patch 1.4.
It is reproducable, i choose the spawn point, the round starts, spawn > ctd.
My system is rock stable, and i never had client caused problems since i started to play BF2 (patch 1.3).
I reinstalled windows, i tested on winxp_x64 too, i tested different drivers, i tested without ms-updates since sp2. No success.
I have alot dmp files, but how can i read them ? Is there a tool ?
greetz,
Johnny
sorry for my bad english, just ask if there is something you can´t understand.
This is my first post.
I never had crashes back to desktop or things like that. But since 1.4 i got alot ctd.
It is always the same. I play a round or two. But i ctd at the very latest third or fourth round. I wasnt able to play more than three rounds in a row since patch 1.4.
It is reproducable, i choose the spawn point, the round starts, spawn > ctd.
My system is rock stable, and i never had client caused problems since i started to play BF2 (patch 1.3).
I reinstalled windows, i tested on winxp_x64 too, i tested different drivers, i tested without ms-updates since sp2. No success.
I have alot dmp files, but how can i read them ? Is there a tool ?
greetz,
Johnny
sorry for my bad english, just ask if there is something you can´t understand.
I already tested older drivers.
And btw,
It is always the same error. It is strange, i dont have a drive "D:\" and i dont have a folder "Aphrodite".....
And btw,
Code: Select all
D:\Aphrodite\BF2_1.4\Code\BF2\Game\Common\GhostManager.cpp(1350): Error: Common: state bits differs read:89 expected:76
[EOF]'JohnnyFu wrote:Ok, i thought is is fixed, but i still got crashes.
Do you think it is caused by Daemon-Tools ?
possible.. remove it and run off the disk for a while.. or try another image.
Also if your running DualCore make sure you have the right drivers installed I saw this happen once when I went dual.. plus run the optimizer.