SG Broadband Community

Tailgunner9

Had to put another Motherboard in my P4 Northwood. Had trouble finding a board online that would use my same memory as well as the Northwood.
Mine would boot but would just shut down for no reason. Doing great now. Good luck

Tailgunner9

Does a CD/DVD burner have 2 burning lasers? Mine will burn CD but not DVD any more. Have reinstalled software several times but still same. Any ideas??:2cool:

Tailgunner9

It use 184 pin DDR 3200/2700/2100 depending on FSB that it is using. 800/533/400

Tailgunner9

Amro, That did not work. Have even gone into Services and disabled it there but it still comes up on boot up me having to click on my account to continue boot.

Tailgunner9

Does not work in RUN or Comand Prompt on XP. Use ipconfig /all in Prompt.

Tailgunner9

My Photosmart printer install the above and now on boot up I get a box I have to click on to continue the boot to Windows. How can I get rid of these coming up on boot up and what is the .net framework used for thru my printer?? Thanks

Tailgunner9

3.06 is a P4 Northwood CPU 533 FSB, I use an Intel 850E chipset with Rambus 1066 memory on motherboard. Never any complaints until motherboard went bad. Got it on new Intel board now working GREAT.

Tailgunner9

Got a new board for $80 and used my old 3.06 CPU and memory and running GREAT now. Noticed a small piece of solder fell off old board when removing. So think this may have been the problem. Thanks for advice.

Tailgunner9

Thanks Kingofools for a straight answer to question. Got another board and have the P4 3.06 H/T up and running. $80 board is a lot cheaper than buying another board, CPU and new memory for that board. I am back running for $80 and my time to switch it out. And you do not notice $700 worth of ...

Tailgunner9

And some do not know how to type a simple YES IT WILL WORK or YES

Tailgunner9

Guess nobody can answer this question. Would like to save my old P4 3.06 H/T by putting it on another motherboard if possible that it would work on.

Tailgunner9

Can I take the above CPU off bad board and use it on any motherboard with socket 478 and 533FSB??? Thanks

Tailgunner9

Gigabyte GA-81HXP that is going bad. Works awhile then crashes. Replaced Ram but still does it. Has a 3.06 P4 with H/T 533bus

Tailgunner9

Use it for burning my digital movies and some games. Budget not over $1000 or could jus get new computer.

Tailgunner9

Which would most of you same is the best or fastest?????? Thinking of buying one.

Tailgunner9

What would you suggest as a replacement for my computer for gaming. Is the Intel 955x board with Pentium D 840 3.2GHz Open for suggestions. Want something with PCI express and SATA so if I upgrade hard drive and video card later. Guess my AGP video card will not work on the newer boards like this ...

Tailgunner9

Do not have a DFI board to use this. As i said my chipset just seems to work for about a minute when I boot then goes off. So not sure if it is suppose to or what. Maybe just runs when it needs to cool. Gigabyte board. Thanks

Tailgunner9

Tony and Izzo, I did not say the CPU fan but the chipset fan. CPU fan runs as it should all the time. Chipset is heat sink and small fan beside the CPU on P4

Tailgunner9

Is my chipset fan (40mm) suppose to just run at startup then shut off or should it be running all the time?? Thanks fellows!! :2cool:

Tailgunner9

Thanks for trying to help but will not create a new connection in Network Connections.

Tailgunner9

Nothing in registry where you said to look with 1420 MTU. Use no router, NIC is built into Gigabyte motherboard (Realtek), Local Area Connection in Network connections and will not delete or even give option to delete, no sharing enabled, Nothing checked under LAN. Must be that ISP or modem they ...

Tailgunner9

MCCOFFEE, I have Network Connections in Control Panel, but it will not let me delete it. I am not on Network or LAN or router, just cable modem. Ready to give up and leave it at 1420 MTU and MSS 1380!!!

Tailgunner9

Did the reg search you said but found nothing of a 1420. Have also do a format and install of XP, so should not been anything left from Bellsouth ISP. Even after this MTU and MSS will not change. Wonder if cable company has done something to Motorola modem.

Tailgunner9

Like I said at the start Mr. Coffee, TCP_SG Optomizer what ever you want to call it, will not change the MTU and MSS from what I reported. Tried it several, several times. Any other ideas on how to get it changed to 1500 MTU and 1460 MSS????? Thanks

Tailgunner9

Switched to cable today and have run TCP Optimizer but as you see it does not change MTU or MSS, just RWIN is all that it will change. Using Motorola SB5100 model from cable ISP. Any idea on how to change MTU to 1500 and to change MSS?? TCP Optimizer will not change it.

TCP options string ...

Tailgunner9

Guess McCoffee does not have an answer to this.

Tailgunner9

:2cool: What does this mean from Dlsreports and should it be lower. Thanks McCoffee

sacks you sent: 1
pushed data pkts: 2

Tailgunner9

Got it set on 38400, Here is analyzer results. Need other speed results??
TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider ...

Tailgunner9

I changed the Default Receive Window from 384000 to 63888. Is this not what you said to change????

Tailgunner9

Got it change to 63888. Here are results now. Thanks!!
TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 ...

Tailgunner9

Here are analyzer results you want Mr. Coffee

TCP options string = 020405ac0103030301010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 ...

Tailgunner9

Thanks Mr. Coffee. As you see below it increased my transfer rate. You have a nice weekend!!!!

Service: isdndslcablewirelesssatellite Speed (advertised) kbit/s: Operating System: win95win98win98SEwinMEwinNTwin2kwinXPMacLinuxFBSDSolaris Connection ...

Tailgunner9

Mr. Coffee, AVG anti virus is great as you say but the firewall with SP2 RC1 does not recognize this software. Can not say if final verson of SP2 will.

Tailgunner9

Her it is just as I said, but is set at 63888 as always in registry where I have always set it until SP2 RC1 Thanks for any help Mr. Coffee

TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS ...

Tailgunner9

Mr. Coffee, Installed the new SP2 RC1 and it has changed window size to 64240 from what I have it set at 63888. It still shows it as 63888 where I have always manualy set it in the registry. But the TCP/IP Analyzer shows it as 64240. Has the SP2 RC1 changed where this is set in the registry???? HKEY ...

Tailgunner9

Changing to 63888 just made the Pushed data packets go up to 5 instead of 2, is only difference it seemed to make. Thanks McCoffee!!!!

Receive Window (RWIN): 63888
Window Scaling: 0
Path MTU Discovery: ON
RFC1323 Window Scaling: ON
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested ...

Tailgunner9

Mr. Coffee, Lower my recieve window to 63888 as you suggested. I always thought it was to be higher for broadband(DSL) as I have. Thanks will try for awhile at this setting.

Tailgunner9

What does ISP,etc have to do with the question I asked?? To humor you it is Bellsouth DSL, 1.5Mb, and Windows XP. Hope this helps to answer question. Thanks!!

Example 146000 byte download
Actual data bytes sent: 146000
Actual data packets: 101
Max packet sent (MTU): 1492
Max packet recd (MTU): 1492 ...

Tailgunner9

Tel me what Pushed Data packs is?? See my test result and tell me if it is OK. Thanks Fellows

Your Tweakable Settings:
Receive Window (RWIN): 255552
Window Scaling: 2
Path MTU Discovery: ON
RFC1323 Window Scaling: ON
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1452
TTL ...

Tailgunner9

Do you use the above for XP or is it just for 2000? I have in registry TcpWindowSize, so do I need the Global also on XP????

SG Broadband Community

Search found 51 matches

Plextor DVD burner

winipcfg

.Net Framework

P4 478 533FSB Northwood

Pentium D or P4 with H/T

Good Motherboard, CPU combo

Chipset Fan

Mtu

Mtu

Mtu

Mtu

SG Optomizer & Mr. Coffee

From Bellsouth DSL to Cable

McCoffee

TCP Window Size

TCP Window Size

TCP Window Size

TCP Window Size

TCP Window Size

Firewall

TCP Window Size

TCP Window Size

Test Results

Test Results

Test Results

Speed Tes Results

Global Tcp window size