SG Broadband Community

zxc47

I am on roadrunner and went to there new web phone service. They came out and put a new modem in.The cable from the moden to the wan port reads it as a 100/Tbase not the old 10 Tbase. Same thing if I put it in a switch.

Any body know if old 10/T base modems are on it way out.

zxc47

Are you running any kind of firewall ?But the first thing I would look at is power management( allow the computer to turn off this device to save power)to find this setting and uncheck the box . You need to go to Device Manager and click on Properties of your nic card and click on the tab name power ...

zxc47

Do you have the old black cable from the from the street to you house or the new orange one ? What other service’s do you have with roadrunner? Internet Phone ? HD TV ? Dig. box ?. The reason I ask is because when I added the HD TV box to the cable service I didn’t get a good pitcher on the TV ...

zxc47

I have roadrunner and yes it is 5/mb down 386 up, but for $64 you can get 8/mb down and 512 up .and it is cool

zxc47

sc.rr.com
http://www.dslreports.com/speedtests/28 ... 1072627021

zxc47

install NWlink ipx/spx compatible transport protocol.
To do this right mouse click on your network icon,Then click on proerties,then on local area connection then proerties again. then click on the install and add the ipx/spx protocol.

you need to add it to all computers

zxc47

http://www.howstuffworks.com/lan-switch2.htm
it a switch or a hub

zxc47

I think I would lose the hub and add a switch. You will allways have lag on a hub with more than one computer running through it when you try to play online games.

zxc47

Verizon 640/90 lines will 'fail' the medium bandwidth test due to low upload speed

zxc47

just go to the computer store and tell them you need a crossover cable to go from the modem to your computer .they should fix you up with what you need.. There are two ways cable end's are put on. A crossover cable is were both end of the caple plug are wire the same like pin 1 to pin 1 pin 2 to pin ...

zxc47

stainless steel. Put the Pro200WL PCI Fast Ethernet Adapter in and run a cross over cable from the modem to your computer . then unplug the modem for about a min. then plug it back in ,I think that will take care of the lag.

zxc47

do you have a usb cable from the modem to your computer

zxc47

Your not useing usb modem are you?

zxc47

I like this wireless router
http://www.provantage.com/buy-7NETW01N- ... opping.htm

zxc47

Do you have the winXP firewall disable?what virus program do you have ?Have you scan your system for spy ware?

zxc47

Along time ago when computer only had very little ram like 4mb or 8mb even 16mb you could set the bio's to shadow ram to make the system run faster.But with todays fast computer, It does little to help speed .You can set it not to shadow and see if it help you in your game's.But with your system I ...

zxc47

stainless steel There may be some setting in your bio's that you can change. copy and paste a link to your test.Your video graphics memory may be shadowed or you have to much set for you AGP slot.This are thing to look at ,but what kind of mess is the browser in?

zxc47

Low ping with lag tell me that something is going on in your computer.My best guess would be a spy ware program running in the background.If it's not that I would look at your firewall program and see if it has a filter running or even a virus program running.Try this go to http://www.pcpitstop.com ...

zxc47

zxc47, what type of connections are you using on your pro800 turbo? How in depth are the firewall settings on the pro800 turbo? SPI? (I'll go check out the specs for that) Does the pro800 keep a decent firewall log ...

zxc47

Time Warner is uping there download speed to 3000 down . put up with it a few days and see what happen.You will lose service off and on for a day or two as this take place . You may need to reboot the modem to get service back .you may also need to reset up your router if they change your IP

zxc47

I run a nexland pro800 turbo .what do you want to know about it

zxc47

I am on cable >Roadrunner<I have two IP's and it cost me $9.00 more a month.To use the the two Ip's I have to run a switch between the modem and the router.I also run a two wan port router.With this set up I can play on line game on both Ip' s at the same time or two differant server at the same ...

zxc47

Here in South Carolina Roadrunner has all ready moved to 3000 down but as you can see we are a little shy of that.
2003-11-14 07:37:24 EST: 2855 / 362
Your download speed : 2855087 bps, or 2855 kbps.
A 348.5 KB/sec transfer rate.
Your upload speed : 362122 bps, or 362 kbps.
Seems like broadband ...

zxc47

The best way is to add a nexland router pro800 turbo. it has two wan ports. you can run a cable modem and DSL at the same time.

zxc47

That hard to say, I think you need to look at what your ISP has you cap at.If you are close to the cap with good ping then a new modem will do very little.Something you should do is tweak your system . That may do more for you than a new modem.

zxc47

I run a nexland pro800 turbo ,My setup is a cable modem to a switch ,then two cable's to the wan ports . I have two IP's.very fast and work's very good.

zxc47

Also when you do the update on firmware you should only have one computer on the router and when you run the router setup the first time

zxc47

nov0798. So what is your point? Nobody said you had to have a router ,They said that a router was better than just a switch.But if your happy with just a switch and you don't mind people hacking in your computers all the time . Good luck.But hey > I bet someone in your computer right now ...

zxc47

Get him to do it as fast as you can!!befor he can change his mind!!!Hell the paint will cost more than $25.
look here this will give you some info on fans
http://www.dansdata.com/coolercomp_p5.htm#sk7

zxc47

I wish I could do that kind of work.LOL But it looks like someone with to much money and time on there hands. I could help him with the money.LOL

zxc47

BMED
good job!!!!!!

zxc47

Gort9k I think this page will tell you what you want to know
http://www.howstuffworks.com/lan-switch2.htm

zxc47

visserj A router would be the best way to go , But with an internal modem or a external modem that use a usb to hook to your computer you will need to add a lan card to both computers.Also if you only have one computer to add you don't need a router just run a crossover cable cat6 or cat5e from your ...

zxc47

sentra8777 A 500 DSL line is not that good .But the big thing with cable or dsl is if the ISP is any good?You need to talk to someone in your area.If cable will give you more speed like 1500 or 2000 down I would go with cable but if your looking at about the same speed with DSL I would stay with DSL ...

zxc47

I don't know how you do it ? But win xp will give you a screen were you can pick the to clone .if it see you have a new hard drive and if both hard drive are in the system.after it been reformatted. I would think that win2000 will do the same.I have done it befor

zxc47

albertldee To clone a new hard drive
Go in to bios setup ,set it up to boot to cd rom,then set primary master to none then set the jumper on the new hard drive as master the old one as slave.Then put the win2000 cd in and reboot.After you have it formatted and clone then go back to setup and set ...

zxc47

I don't think you can get cable if Cablevision company does not offer cable internet.AOL will set you up on DSL ,but if you have DSL I would stay with that .

zxc47

YeOldeStonecat is right they would need to be in a close space in order to work.

zxc47

I would think that it is the modem . It tell you that there is not a signal from the modem

zxc47

I don't have DSL but I would think on step 12 you would pick internet protocol TCP/IP

SG Broadband Community

Search found 887 matches

Have the new cable modem gone to 100/TBase/