Cablenut? Can he help me?

RedRunner · Post by **RedRunner** » Tue Mar 27, 2001 9:59 am

Cablenut©©©©I have downloaded a prog called cablenut but when i loaded it to set settings soo much info I was like "WTF am I in wonderland? Theres no place like home Todo©©"
So I had no idea what to fill in and what to leave blank© It was confusing to say the least© What do you recommend me doing right now from scratch because I here many good things about your progs and ideas© Should I gte a patch or the prog and do what?
I have the following:
Windows 95
Cable Modem Service
96 RAM
3©5 gigs free
233 DEll PC
and i did alot of tweaks to it already but as always©©i want more speed© Im greedy hehe

Lobo · Post by **Lobo** » Tue Mar 27, 2001 10:03 am

First take analyer test and post results and on his program, blank boxes only mean the default value is being used, here's how to take test:
:1. Go to top of page and click on TCP/IP Analyzer
2. Copy all this by highlighting everything in box with mouse
(you may have to make box smaller. To copy contents of box, highlight, then hit Ctrl & c, on your keyboard, when you return to Speedguide in reply box, with cursor blinking, hit Ctrl & v, this will copy contents in box so I may look at it. Thank you.
X out your IP Address

RedRunner · Post by **RedRunner** » Tue Mar 27, 2001 10:24 am

TCP options string = 020405b4

MTU = 1500
MTU is fully optimized for broadband©

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS©

Default Receive Window ¥RWIN¤ = 44620
RWIN Scaling ¥RFC1323¤ = 0 bits
Unscaled Receive Window = 44620
For optimum performance, consider changing RWIN to a multiple of MSS©
Other values for RWIN that might work well with your current MTU/MSS:
513920 ¥MSS x 44 * scale factor of 8¤
256960 ¥MSS x 44 * scale factor of 4¤
128480 ¥MSS x 44 * scale factor of 2¤
64240 ¥MSS x 44¤

bandwidth * delay product:
Your RcvWindow limits you to: 1784©8 kbps ¥223©1 KBytes/s¤ @ 200ms
Your RcvWindow limits you to: 713©92 kbps ¥89©24 KBytes/s¤ @ 500ms

MTU Discovery ¥RFC1191¤ = OFF

Time to live left = 19 hops
TTL value is ok©

Timestamps ¥RFC1323¤ = OFF

Selective Acknowledgements ¥RFC2018¤ = OFF

IP type of service field ¥RFC1349¤= 00000000
**********************************************
So what should I do now????? Any help is appreciated!

Lobo · Post by **Lobo** » Tue Mar 27, 2001 10:29 am

You do not have patch installed do this, then reboot, retest and post back here:
desktop click on cablenut 4.0
Click on ccs files
then click on cable
Select normal cable
this will enter settings
click on save to registry at bottom, reboot or it will not work.

If you decide to remove Cablenut's patch, use uninstaller in Cablenut 4.0 folder on desktop. This will take you back to Windows default.
Retest and repost so I can see if patch is in Copy all this by highlighting everything in box with mouse
(you may have to make box smaller. To copy contents of box, highlight, then hit Ctrl & c, on your keyboard, when you return to Speedguide in reply box, with cursor blinking, hit Ctrl & v, this will copy contents in box so I may look at it. Thank you.
Click on Cablenut 4.0 on desktop, RIGHT click on adjuster and select short cut to desktop, the same with Reboot.

CHECK BACK FOR UPDATES
Would not be bad idea to bookmark this page so you can return for updates or reading.

RedRunner · Post by **RedRunner** » Tue Mar 27, 2001 10:31 am

ok im gonna redownload cablenut and post back hopefully in 5 min©©©©©one more thing©©i noticed alot of the©©©©©©©
Vtcp386 Fix for 95
I run windows 95©©©should I have this?

Lobo · Post by **Lobo** » Tue Mar 27, 2001 10:34 am

Yes, you must have it for program to work

RedRunner · Post by **RedRunner** » Tue Mar 27, 2001 10:38 am

do i just need the vtcp fix for 95 or do i need winsock 2©0 well? im at cablenut website he has 2 parts for windows 95© i tried to download both but both have same file name and extension so i got the vtcp one DLd© but i reinstalled windows 95 i think i got a real old winsock© any ideas what i should do before tryign to install vtcp?

Lobo · Post by **Lobo** » Tue Mar 27, 2001 10:54 am

You need both

Lobo · Post by **Lobo** » Tue Mar 27, 2001 10:56 am

We have both on our patch page if you have problems there.

Lobo · Post by **Lobo** » Tue Mar 27, 2001 11:00 am

It just hit me, 95 we don't deal with it much.
you need 4.0, 4xx to 4.02, vtcp386 Fix and Windows Socket 2, sorry

Lobo · Post by **Lobo** » Tue Mar 27, 2001 11:43 am

Make sure you reboot after appling 4xx to 4.02

RedRunner · Post by **RedRunner** » Wed Mar 28, 2001 1:38 pm

OMG i did what u said with the vtcp 386 and it messed up my entire comp..i have to reformat.....do i need that file cause i went to microsft.com and i downloaded DCOM95 that says it has a fix with the memory leak so i should be ok. so what should i do?

Lobo · Post by **Lobo** » Wed Mar 28, 2001 2:00 pm

Did you download the version for 98 or 95. We have never had problem before

RedRunner · Post by **RedRunner** » Wed Mar 28, 2001 3:45 pm

downloaded version 95 for my comp.....anyway....maybe i should just try the cablenut prog without all the other progs?

Lobo · Post by **Lobo** » Wed Mar 28, 2001 3:50 pm

We have both patches on our patch page, but first do the cablenut, take our test above and post results here so we know where you are:
:1. Go to top of page and click on TCP/IP Analyzer
2. Copy all this by highlighting everything in box with mouse
(you may have to make box smaller. To copy contents of box, highlight, then hit Ctrl & c, on your keyboard, when you return to Speedguide in reply box, with cursor blinking, hit Ctrl & v, this will copy contents in box so I may look at it. Thank you.
X out your IP Address

[ 03-28-2001: Message edited by: Lobo ]