P-133 SDRAM128 = Mobo P-100 Trouble?

ELZZZORRO · Post by **ELZZZORRO** » Mon Oct 16, 2000 4:56 pm

I have a Asus P2B Mobo P-100 with P-100 128 SDRAM.
I just installed more mem P-133 128 SDRAM.
My bios accepted np but...... will I have Win 98 problems?
I dont know if will have compativility problems with 128 P-100 and 128 P-133= 256
Please help cuz I dont know if my new hard drive is causing the crashes or if it is the memory.

Thanks'

Battleship · Post by **Battleship** » Mon Oct 16, 2000 6:21 pm

I'm not sure about your post. Are you having problems or do you want to know if you can expect problems putting PC100 in with PC133?

PC133 should work at 100Mhz with no probs..... With that being said it is always possible that 2 different chips in the same computer could not get along together well causing errors of some kind.
If you are having probs tell me exactly what problems you are having.

------------------
A:\ >format c:
WARNING, ALL DATA ON NON-REMOVABLE DISK
DRIVE C: WILL BE LOST!
Proceed with format (Y/N)?y

ELZZZORRO · Post by **ELZZZORRO** » Mon Oct 16, 2000 7:43 pm

¥up..I was having problems with 2 different chips in the same computer.................. P-100/128 & P-133/128 SDRAM.
I just exchange to P-100
TY

Originally posted by Battleship:
I'm not sure about your post. Are you having problems or do you want to know if you can expect problems putting PC100 in with PC133?

PC133 should work at 100Mhz with no probs..... With that being said it is always possible that 2 different chips in the same computer could not get along together well causing errors of some kind.
If you are having probs tell me exactly what problems you are having.

64bit · Post by **64bit** » Tue Oct 17, 2000 12:58 am

You might want to check in your bios. You should be able to set each banks clock rate independent of each other(8ns for pc100;7ns for 133 or 10ns for pc100 and 8ns for 133) you get the picture.