siemens gigaset se565 [2mb]

Get help and discuss anything related to tweaking your internet connection, as well as the different tools and registry patches on the site. TCP Optimizer settings and Analyzer results should be posted here.
Post Reply
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

siemens gigaset se565 [2mb] -windows vista ultimate-

Post by llj143 »

this is xp

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.11.2008 00:26
IP address: 203.177.xx.xxx

TCP options string: 020405ac0103030101010402
MSS: 1452
MTU: 1492
TCP Window: 128480 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64240
Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
BDP limit (200ms): 5139kbps (642KBytes/s)
BDP limit (500ms): 2056kbps (257KBytes/s)
MTU Discovery: ON
TTL: 41
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).


ISP globelines....are my settings okay? or do i need to change something?
Top
User avatar
Rollingstone
Senior Member
Posts: 3161
Joined: Wed Jan 23, 2008 5:50 am
Location: HoChiMinh, Vietnam

Post by Rollingstone »

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 127776
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - check
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
What makes you: "...waking up in the morning so excited about & wanna FLY out of the door ?"
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

this is xp

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.11.2008 07:36
IP address: 222.127.xx.xx

TCP options string: 020405ac0103030101010402
MSS: 1452
MTU: 1492
TCP Window: 127776 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 63888
Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
BDP limit (200ms): 5111kbps (639KBytes/s)
BDP limit (500ms): 2044kbps (256KBytes/s)
MTU Discovery: ON
TTL: 41
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).

is this okay? :)
Top
User avatar
Rollingstone
Senior Member
Posts: 3161
Joined: Wed Jan 23, 2008 5:50 am
Location: HoChiMinh, Vietnam

Post by Rollingstone »

[quote]MTU: 1492
TCP Window: 127776 (multiple of MSS)

The TCP Settings are correct !
What makes you: "...waking up in the morning so excited about & wanna FLY out of the door ?"
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

thanks.. now i upgraded to windows vista ultimate and analyze again and here's my result
« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.15.2008 21:20
IP address: 203.177.xxx.xxx

TCP options string: 020405ac0103030201010402
MSS: 1452
MTU: 1492
TCP Window: 66792 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 16698
Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
BDP limit (200ms): 2672kbps (334KBytes/s)
BDP limit (500ms): 1069kbps (134KBytes/s)
MTU Discovery: ON
TTL: 103
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)
Tracing route to http://www.yahoo-ht3.akadns.net [209.131.36.158]

over a maximum of 30 hops:



1 <1 ms <1 ms <1 ms 192.168.254.254

2 34 ms 33 ms 33 ms 203.177.250.1

3 33 ms 33 ms 33 ms 222.127.228.57

4 51 ms 51 ms 51 ms 124.6.148.229

5 79 ms 79 ms 78 ms so-1-2-0.gw4.mnl1.asianetcom.net [203.192.188.13]

6 120 ms 130 ms 129 ms po1-0-0.cr1.nrt1.asianetcom.net [202.147.24.214]

7 240 ms 240 ms 240 ms po7-0-0.gw1.sjc1.asianetcom.net [202.147.0.34]

8 228 ms 229 ms 232 ms PAT2.SJC.yahoo.com [206.223.116.16]

9 223 ms 232 ms 222 ms ae0-p171.msr2.sp1.yahoo.com [216.115.107.83]

10 240 ms 231 ms 231 ms te-9-1.bas-a2.sp1.yahoo.com [209.131.32.23]

11 222 ms 223 ms 223 ms f1.http://www.vip.sp1.yahoo.com [209.131.36.158]



Trace complete.


btw can i use the Gaming Tweak - Disable Nagle's algorithm method?

what can you suggest if i apply some of these tweaks? http://www.speedguide.net/read_articles.php?id=2574
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

llj143 wrote:
btw can i use the Gaming Tweak - Disable Nagle's algorithm method?
Disabling Nagle's algorithm method will create havoc to your high bandwidth and latency TCP connections.

Moreover, online games usually use UDP signals, not TCP.
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

so i guess is not advisable to use it?

how about my TCP results, are they okay? or do i need to change something? thanks
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

llj143 wrote:so i guess is not advisable to use it?

how about my TCP results, are they okay? or do i need to change something? thanks
Vista autotunes and usually do not need to be tweak. The Optimizer can only tweak XP or earlier OS.
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

i forgot to mention this modem has 4 ports, 2 computers are connected, xp and vista.. is it okay to use optimizer for xp?
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

llj143 wrote:i forgot to mention this modem has 4 ports, 2 computers are connected, xp and vista.. is it okay to use optimizer for xp?
Yes. The Optimizer can tweak XP or earlier, but not Vista.

Post the TCP Analyzer report for the XP.
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

now there's a problem my xp says limited or no connectivity but the modem is working and i can connect my vista.
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

llj143 wrote:now there's a problem my xp says limited or no connectivity but the modem is working and i can connect my vista.
Go to Network Connections and call out the Properties of your local connection. Highlight Internet Protocol (TCP/IP) and click Properties.

Make sure settings are to obtain automatically.
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

okay i got it back :) and here's my result

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.18.2008 04:22
IP address: 120.28.xxx.xxx

TCP options string: 020405840103030101010402
MSS: 1412
MTU: 1452
TCP Window: 128492 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64246
Recommended RWINs: 64952, 129904, 259808, 519616, 1039232
BDP limit (200ms): 5140kbps (642KBytes/s)
BDP limit (500ms): 2056kbps (257KBytes/s)
MTU Discovery: ON
TTL: 39
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).

why is it back to 1452?
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
Windows Scaling - check
TCP Receive Window - 127776
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.18.2008 08:08
IP address: 203.177.xx.xxx

TCP options string: 020405840103030101010402
MSS: 1412
MTU: 1452
TCP Window: 128492 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64246
Recommended RWINs: 64952, 129904, 259808, 519616, 1039232
BDP limit (200ms): 5140kbps (642KBytes/s)
BDP limit (500ms): 2056kbps (257KBytes/s)
MTU Discovery: ON
TTL: 41
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).
Top
User avatar
Rollingstone
Senior Member
Posts: 3161
Joined: Wed Jan 23, 2008 5:50 am
Location: HoChiMinh, Vietnam

Post by Rollingstone »

MTU: 1452
Log into your modem/router and set MTU (MRU) to 1492, MSS 1452 (if any), reboot and post Analyzer to see if MTU will change.
What makes you: "...waking up in the morning so excited about & wanna FLY out of the door ?"
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

1492 as inputed in the MTU :(
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1452
TTL - 64
Windows Scaling - check
TCP Receive Window - 129904
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

okay im going back to my prolink modem and here's the result

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.21.2008 12:09
IP address: 222.127.xxx.xx

TCP options string: 0204055c0103030101010402
MSS: 1372
MTU: 1412
TCP Window: 128968 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64484
Recommended RWINs: 63112, 126224, 252448, 504896, 1009792
BDP limit (200ms): 5159kbps (645KBytes/s)
BDP limit (500ms): 2063kbps (258KBytes/s)
MTU Discovery: ON
TTL: 41
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).
Top
llj143
Member
Posts: 61
Joined: Wed Oct 01, 2008 1:50 pm

Post by llj143 »

help please :(
Top
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
Windows Scaling - check
TCP Receive Window - 129904
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Top
Post Reply

Return to “Broadband Tweaks Help”