i got I got an NF7 Abit motherboard and a amd athlon Barton 2500 Xp and a Radeon 9600 pro and a Corsair 512mb xms Twinx pc 3200 dual channel 400mhz.
ok in the bios i can set the barton at 3200 speeds if i do that and i keep the ram at the default settings 8-3-3 it's stable but I also believe it is stable at 7-3-3 cas 2, but any lower and it crashes and stuff.
currently my Barton is at 192 FSB stockcooling with 1.7 Vcore 2112 mhz I believe, witht he multi at 11. i tried taking the mutl to 11.5 and got 2208mhz which i thought was good.
i kept getting errors. Currently with 192fsb and 11 multi and 1.7 vcore and the ram at 2.7core its frequency is 384 i think that is the max you can have at without low latency, read somewhere.
the current timings are 5-3-2 cas 2 and its stable has been like this for a few days.
so would i get better results with 3200 speeds and 7-3-3 timings or 192fsb and 11 multi at 5-3-2 timings i currently get around 13k 3dmarks and all i care about is the marks so what should I try?
which is faster?
-
opmharley
- Advanced Member
- Posts: 840
- Joined: Wed Jul 30, 2003 10:46 pm
- Location: Hazel Park, Michigan
which is faster?
If you won't stand behind the troops then you can trying standing in front of them.
-
deksecurity
- Regular Member
- Posts: 256
- Joined: Fri Jan 26, 2001 12:00 am
- Location: columbus,ohio, usa
try 2-2-2-11
ABIT NF7-S v2.0 AMD XP-Mobiles 2500+:p(11.5x235) OCZ 2x225(3500) fasttrak tx2000 RAID 0 ATI 9500 Softmod(9700) @400/330 used koolance to cool my vdo card antec ture 550 custom water cooler
pictures
pictures
