I am having problems with stalling when browsing the internet, i have a wireless router, at 2.4 gig, My Desktop is hooked up with cable, My laptop on wireless, my laptop seems to be okay, but my desktop sucks, now i have done several speed tests, i am getting around 1.6 to 2.2 download speed and 287 upload, which seems good, but still stalls, SUCKS, I updated my firmware, new drivers, release renew ipconfig,,, nothing works,, i have comcast cable service, please help !!!
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 50280
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 50280
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 2011.2 kbps (251.4 KBytes/s) @ 200ms
Your RcvWindow limits you to: 804.48 kbps (100.56 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 50 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000
Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)
Cablenut settings
CableNut Custom Settings File 1.0
win2k
448000
48640
1
200
480
640
819200
64000
150400
0
12800
32
4096
1
1
0
87600
8000
16384
5000000
1
1
1
1
3
100
80
1460
1460
30
0
87600
20
10
64
0
6
24:(
Getting Ready To Lose It, Ive Had It
-
ppanther68
- Member
- Posts: 38
- Joined: Sun Aug 24, 2003 6:36 am
Getting Ready To Lose It, Ive Had It
AMD ATHLON XP 2100+ OVERCLOCKED TO 1.824 GIG, MSI K6 ULTRA 2C MOBO, 512 DDR 2700 RAM, ATI VIDEO DDR, DUAL HDD, 7200 RPM, CREATIVE LIVE AUDIO, SURROUND SOUND 5.1, CUSTOM CASE, WINDOW SIDE, UV LIGHT BLACK, UV REACTIVE CABLES, 7 FAN SYSTEM !!!
-
mnosteele52
- Posts: 11913
- Joined: Tue Jul 24, 2001 12:00 pm
- Location: Chesapeake, VA
OK use the following settings in CableNut:
DefaultReceiveWindow = 230400
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 43800
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 43800
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in my Help & Tips link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall or Sygate Firewall, both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 is an excellent FREE AV app.
DefaultReceiveWindow = 230400
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 43800
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 43800
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in my Help & Tips link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall or Sygate Firewall, both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 is an excellent FREE AV app.