Anything related to hardware (CPU/MoBo/Video/FSB/BIOS, etc.), hardware settings, overclocking, cooling, cool cases, case mods, hardware mods, post pics of your unique creations here.
Blisster
SG Elite
Posts: 9664 Joined: Fri Jan 04, 2002 5:05 pm
Post
by Blisster » Sat May 10, 2003 8:04 pm
This is My Corsair XMS3200LLPT running at 400MHz, does this seem slow to any of you????
any recommendations on tweaking it?
Edward Abbey wrote: A patriot must always be ready to defend his country against his government.
Mark
Posts: 13238 Joined: Wed Apr 11, 2001 12:00 am
Location: .
Post
by Mark » Sat May 10, 2003 8:18 pm
i can't read the picture , but at 192fsb i score about 2998 or so, maybe alittle less.
are you running the ram in sync with the fsb ?
7950x~64GBGskill6000~asusx670e~rx6800~2TBNvme-OS drive~4TB-Nvme-scratch~500GB-SSD-thrash~10TB storage~Windows 10
YARDofSTUF
Posts: 70006 Joined: Sat Nov 11, 2000 12:00 am
Location: USA
Post
by YARDofSTUF » Sat May 10, 2003 8:21 pm
run the ram at the speed of the fsb, so if the fsb is 190 u want the ram at 380
Blisster
SG Elite
Posts: 9664 Joined: Fri Jan 04, 2002 5:05 pm
Post
by Blisster » Sat May 10, 2003 8:34 pm
no i wasn't ill give that a try.
Edward Abbey wrote: A patriot must always be ready to defend his country against his government.
fish59
Advanced Member
Posts: 606 Joined: Sun Oct 22, 2000 12:00 am
Post
by fish59 » Sat May 10, 2003 8:54 pm
Try these settings
Blisster
SG Elite
Posts: 9664 Joined: Fri Jan 04, 2002 5:05 pm
Post
by Blisster » Sat May 10, 2003 11:23 pm
okay, so this is what i scored after overclocking my FSB up to 166 and setting the memory timings at 100%.
any thoughts?
Edward Abbey wrote: A patriot must always be ready to defend his country against his government.
Mark
Posts: 13238 Joined: Wed Apr 11, 2001 12:00 am
Location: .
Post
by Mark » Sun May 11, 2003 12:42 am
crap i went to 196 4-2-2-2 and got a hard drive corrupt, reinstalling windows right now, good thing for partions, probaly only lost some stupid pictures.
@ 196 6-2-2-2 i got like 2980 or so.
7950x~64GBGskill6000~asusx670e~rx6800~2TBNvme-OS drive~4TB-Nvme-scratch~500GB-SSD-thrash~10TB storage~Windows 10
Scott
Senior Member
Posts: 3846 Joined: Thu Feb 14, 2002 12:00 pm
Post
by Scott » Sun May 11, 2003 9:54 am
I am getting 3067 at 199 (BIOS) or 201( Sandra) @ 6-2-2-2. I am not sure why I get two different FSB settings by the two programs.
Can't go past 6-2-2-2, or it doesn't post and I have to swap memory.
RoundEye
Posts: 18219 Joined: Sun Jul 16, 2000 12:00 am
Location: In a dry but moldy New Orleans, Louisiana
Post
by RoundEye » Sun May 11, 2003 4:06 pm
I have the Gigabyte 8INXP mobo, the board seems to be really performing well for me. I'm really happy with it, I think I'm going to keep it for a while.
I don't know why, but every benchmark in Sandra wants to compare the board to a dual CPU setup. I only have one processor and it's a 2.6 @ 3.07.