A nice little tweak that works :)

Get help and discuss anything related to tweaking your internet connection, as well as the different tools and registry patches on the site. TCP Optimizer settings and Analyzer results should be posted here.
Post Reply
User avatar
Jim_Morrison197
Member
Posts: 24
Joined: Thu Jun 27, 2002 12:59 am
Location: Pittsburgh. PA

A nice little tweak that works :)

Post by Jim_Morrison197 »

Go too the Internet Priorities and double click on TCP/IP, click advanced, and uncheck Automatic metric, and put a 1 in the box, and then in the Default Gateways, hit the EDIT button, and clear the check in Automatic metric, and again put a 1 in there, and then restart, it speeds up the internet a lot, i did benchmark tests with and without, and the Automatic metric of 1 speeds are A LOT better. Try it out and let me know how it worked.
User avatar
Triplate
Member
Posts: 87
Joined: Thu Oct 17, 2002 8:57 am
Location: Redmond/Seattle

Post by Triplate »

By God...i think it works! :D :D
neuron

Post by neuron »

I'll see if it helps on this:
http://forums.speedguide.net/showthread ... did=109568

later today, can anyone tell me what the setting does? heh.
User avatar
DREK
Member
Posts: 79
Joined: Sun Jan 26, 2003 8:37 am

Post by DREK »

Jim_Morrison197 could you be more clearer . :rolleyes:
When i put ''advanced'' , there are :
IP settings , DNS , WINS , Options..
I unchecked ''automatic metric'' and put 1 on ''interface metric''..Untill here has been ok ; the defaults gateways are over of automatic automatic metric?Right? I'm not able to click on ''edit'' , it's just possible to click on ''add''...
Can you explain me.. this?Anf if I'm wrong ; can you send me some ''lights''... :D :cool:
Welcome to my world!
User avatar
MadDoctor
New Member
Posts: 4
Joined: Fri Apr 27, 2001 12:00 pm
Location: Looks dark

Post by MadDoctor »

Vic Mackey
Regular Member
Posts: 283
Joined: Thu Mar 28, 2002 7:45 pm

Post by Vic Mackey »

hey jim on my network card i can do the first part of your tweak. i unchecked Automatic Metric and put a 1. but when i click add under default gateway and uncheck/put 1 in box i wont let me add it. theres an add button but its greyed out. should i keep the first part of the tweak if the second wont work?
Vic Mackey
Regular Member
Posts: 283
Joined: Thu Mar 28, 2002 7:45 pm

Post by Vic Mackey »

hey madDoctor is 1 the correct setting for this tweak? on the chart you linked none were 1. what should i put for a cable modem 2000/384?
User avatar
MadDoctor
New Member
Posts: 4
Joined: Fri Apr 27, 2001 12:00 pm
Location: Looks dark

Post by MadDoctor »

Not sure what number to put in. I'm playing with 1 now... and it's working fine. I might do some benchmark test later and see what works for me.
User avatar
JeffL
Regular Member
Posts: 216
Joined: Wed May 29, 2002 3:07 pm
Location: Florida

Post by JeffL »

According to the article you posted 1 would be the best value.

Damn, this tweak is sw33t! :cool: :D
JeffL
Randomosity4.us
Earthlink 7000/512
neuron

Post by neuron »

:/, didn't help on my problem though.
User avatar
piranha
Advanced Member
Posts: 513
Joined: Sat May 19, 2001 12:00 am
Location: Laval, Québec, Canada

Re: A nice little tweak that works :)

Post by piranha »

Originally posted by Jim_Morrison197
Go too the Internet Priorities and double click on TCP/IP, click advanced, and uncheck Automatic metric, and put a 1 in the box, and then in the Default Gateways, hit the EDIT button, and clear the check in Automatic metric, and again put a 1 in there, and then restart, it speeds up the internet a lot, i did benchmark tests with and without, and the Automatic metric of 1 speeds are A LOT better. Try it out and let me know how it worked.
A lot better........ how much ? 5, 10 % ?
User avatar
WolfgangPC
Regular Member
Posts: 221
Joined: Sun Oct 06, 2002 1:18 pm
Location: Canada

Post by WolfgangPC »

As someone else asked here before, what if you can only do the first half of the tweak??Do you still do it or not??The second part is greyed out on my system too??Can someone help?
User avatar
piranha
Advanced Member
Posts: 513
Joined: Sat May 19, 2001 12:00 am
Location: Laval, Québec, Canada

Post by piranha »

Originally posted by JeffL
According to the article you posted 1 would be the best value.

Damn, this tweak is sw33t! :cool: :D


Where did you see 1 is the best value, i didnt see that
User avatar
mccoffee
Posts: 13365
Joined: Sat Nov 03, 2001 12:00 pm
Location: Cleveland, Ohio, United States

Post by mccoffee »

Comptia a+ n+
Vic Mackey
Regular Member
Posts: 283
Joined: Thu Mar 28, 2002 7:45 pm

Post by Vic Mackey »

ok mccoffee now im confused... if i have DHCP enabled i shouldnt use this tweak?? it is enabled on my system
User avatar
MadDoctor
New Member
Posts: 4
Joined: Fri Apr 27, 2001 12:00 pm
Location: Looks dark

Post by MadDoctor »

It require that you're using a router with a internal IP address
User avatar
piranha
Advanced Member
Posts: 513
Joined: Sat May 19, 2001 12:00 am
Location: Laval, Québec, Canada

Post by piranha »

It require that you're using a router with a internal IP address


MadDoctor

Do you mean that with no router, this tweak dont work ?
User avatar
MadDoctor
New Member
Posts: 4
Joined: Fri Apr 27, 2001 12:00 pm
Location: Looks dark

Post by MadDoctor »

Not really. I don't have a router and it didn't do anything for me. Maybe I should go buy a router!

:D
User avatar
JeffL
Regular Member
Posts: 216
Joined: Wed May 29, 2002 3:07 pm
Location: Florida

Post by JeffL »

Well the article states that WindowMetric is what aids Windows in selecting what NIC to use for systems that have multiple NICs and multiple paths to the same resource (ie the Internet per say). The WindowMetric is based on the throughput speed of the NIC. The higher the nubmer, the lower the throughput windows will think the NIC has. Therefore windows selects the NIC with the lower WindowMetric for use first, and then goes to the second NIC and so on when the first is overloaded, or down.

Now I definetly noticed a speed improvement and I have 1 NIC, but I am behind a router. This could possibly be because the automatic WindowMetric setting is being calculated or whatever.

Obviously if you have only 1 NIC you're not worried about which NIC windows should use for connecting so a value of 1 would work. But that also contradicts this because WindowMetric shouldn't matter if you have 1 NIC anyway. But sill, I saw an improvement, so I'm happy.
JeffL
Randomosity4.us
Earthlink 7000/512
User avatar
mccoffee
Posts: 13365
Joined: Sat Nov 03, 2001 12:00 pm
Location: Cleveland, Ohio, United States

Post by mccoffee »

Vic Mackey the only time you should have that tweak is if you have static ips on computer

Vic if you don't have static ips yes you will notice a bigger boost


If you using dynamic routing it takes more load on the router then static i'll show a link
http://www.firewall.cx/routing_protocols.php
Comptia a+ n+
User avatar
Cypher
Posts: 2717
Joined: Tue Jul 02, 2002 12:00 pm
Location: Returning video tapes

Post by Cypher »

Nice link Coffee :D That answers a few questions I've had.
User avatar
JawZ
Posts: 21941
Joined: Fri Feb 23, 2001 12:00 am

Post by JawZ »

I just wanted to say that this is a nice little tweak. Going to add it to my top ten favorite tweaks. ;)
rjtoo
Regular Member
Posts: 114
Joined: Fri May 04, 2001 12:00 am
Location: saskatoon,sask.canada

Post by rjtoo »

i tried this tweak and it worked great.i use cable isp-shaw.ca-static ip`s
linksys befsr11 router.surfing etc was noticeably faster,dsl speed tests,resulted in a higher dl\ul speeds.for some reason,outlook express would not work-no pop3 error.went back to auto settings
for nic & email works.
User avatar
mccoffee
Posts: 13365
Joined: Sat Nov 03, 2001 12:00 pm
Location: Cleveland, Ohio, United States

Post by mccoffee »

Originally posted by rjtoo
i tried this tweak and it worked great.i use cable isp-shaw.ca-static ip`s
linksys befsr11 router.surfing etc was noticeably faster,dsl speed tests,resulted in a higher dl\ul speeds.for some reason,outlook express would not work-no pop3 error.went back to auto settings
for nic & email works.



Sounds like when you tried the tweak you forgot to add new ip for the filtering for example if you dhcp enabled the router gave ip where if you had static set on comps you have goto the portfowarding section and add those ports.. I could be wrong :D
Comptia a+ n+
User avatar
mnosteele52
Posts: 11913
Joined: Tue Jul 24, 2001 12:00 pm
Location: Chesapeake, VA

Post by mnosteele52 »

After reading this thread I looked at my XP box and changed the setting and it does work. I believe Dannjr found this a while back when installing XP for a client and he realized it was slower than 2K on the same connection. This is set to 1 by default in 2K, reguardless a good find.

:D :cool:
liquid-snake

wheres internet prrorities in the first place ?

Post by liquid-snake »

wheres internet priorities ? im a newb :/ hahaha but this tweak sounds kewl
Post Reply