Anything related to hardware (CPU/MoBo/Video/FSB/BIOS, etc.), hardware settings, overclocking, cooling, cool cases, case mods, hardware mods, post pics of your unique creations here.
I agree chris, it was tough when I just pnp'ed the whole setup. This was my second p4 setup and both went very smoothly.
what are you running your voltage at? I'm at 3.05 right now, although running at 10% increase on the voltage... I was unstable at 3.15. I might bump up the voltage to 15% and try 3.10, but I"ll have to be careful about the temps.
AMD XP 1800 running @ 1.54 MHZ, 256 MB DDR, Geforce 440 MX 64 MB, Soundblaster Audigy Platinum, 10/100 mbit NIC card - connected to a DLink router running a 1mbit/256 cable connection, 2 x 60 gb maxtor 7200 hard disks, 1 x IBM deskstar 80 gb 7200 hard disk, 17 inch Packard Bell Monitor... Windows 2000 Pro
To be honest though, if you had to RMA boards now, dont you think you'll be rmaing those on the intel side too? Ya know, most mobo manufactors make AMD AND Intel boards. I doubt they put explosives in the AMD board just for YOU to screw up
And now the end is near,
as so you face the final curtain.
You've lived a life thats full, on each and every highway
Once more much more than this
You'll do it Barretts way.
Hey SLK whatever works best for you, just go with it. It's all about getting the biggest bang for your buck, and peace of mind.
Good luck with it.
Thanks guys for not giving me too much grief I am very sick of these buggy motherboards and I want something reliable. My backup system is AMD and probibly will always be as long as intel is pricey.