Other Speed Test sites

Lobo · Post by **Lobo** » Mon Jul 08, 2002 3:33 pm

http://www.stickdog.com/support/spe...speedtest.phtml

Some other Eastern tests:

http://nyc.speakeasy.net/ - New York City

http://www.2wire.com/support/index.html#

http://www.dslreports.com/stest?loc=3 -New Jersey

http://speedtest.umnet.umich.edu/

Andrzej · Post by **Andrzej** » Mon Jul 08, 2002 7:43 pm

& specialy for you http://home.cfl.rr.com/eaa/Bandwidth.htm

Lobo · Post by **Lobo** » Mon Jul 08, 2002 7:45 pm

Seen that, thanks

Broadsword · Post by **Broadsword** » Mon Jul 08, 2002 10:04 pm

Lobo, everytime I try http://www.dslreports.com/stest?loc=3 it says Sorry. server busy or test limit exceeded! I've never tried the NJ one before... know what could problem wrong be up accident exit?

Lobo · Post by **Lobo** » Tue Jul 09, 2002 10:20 am

It's probably one of DSLR, try it 3 times then you have to pay

http://www.dslreports.com/tools

Lobo · Post by **Lobo** » Tue Jul 09, 2002 10:41 am

Try other ones, your close enough, I live in FL and test in VA

Contact · Post by **Contact** » Tue Jul 09, 2002 10:59 am

Dear Lobo,

I just can't seem to be getting it right. I would really appreciate if you could help out at all.

I am running a P III 450 with 192Mbs/ram on Windows ME. I have a cable modem and the cable company advertises 1500/128.

Having dowloaded TCPOptimizer (Thank you all out there) I just cannot get tweaks right. I know I am capable of more, having tested in the past, but also compared with other local users. I was hoping to get my connection moving at it extreme... all in consideration.

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationPerformanceCustomizationTroubleshootingTermsWindows Links">">">">">">">">">">">">">">">">">
Tue Jul 09 16:48:36 2002.

SpeedGuide.net TCP/IP Analyzer
TCP properties for (f113230.upc-f.chello.nl)
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Win 9x 4.90)
Note: Read the FAQ if the above is not your IP address.

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 27740
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 27740
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 1109.6 kbps (138.7 KBytes/s) @ 200ms
Your RcvWindow limits you to: 443.84 kbps (55.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 52 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

1 connections tested since 03.10.2001.
Analyzer version: 1.01 - updated 05.16.2002.

Thank you very much for any advice you might have,

Take Care

Lobo · Post by **Lobo** » Tue Jul 09, 2002 11:01 am

If you need help please click on profile in one of your posts and fill in so we know what you have, thanks, it's alot easier to click on profile for me to see where your from, OS, system specs to help me help you, thanks again

Lobo · Post by **Lobo** » Tue Jul 09, 2002 11:23 am

Then try Tcp Recieve windows of 51100, 64240, 385440, 43800:)

Contact · Post by **Contact** » Tue Jul 09, 2002 2:23 pm

Firstly,

thank you very much, it all seems the same. Maybe I am doing this wrong.

Also I know this is not the correct thread to get in touch over this. Could you give any other thread you might prefer, and what is the possibility of direct chat or something.

Thank you very much for your help previous as well

Lobo · Post by **Lobo** » Tue Jul 09, 2002 2:26 pm

I can't direct chat or anything like that, have you merged anything into your registry or taken anything out, do you have a backup copy

mnosteele52 · Post by **mnosteele52** » Tue Jul 09, 2002 2:26 pm

Contact try RWINs 17520/23360/27740/36500/55480/93440. What kind of download speeds are you getting now, it is important to post what speeds you are getting with what settings so we know if it's getting better or worse.

Lobo · Post by **Lobo** » Tue Jul 09, 2002 2:30 pm

For CABLE MODEM only, NOT DSL

RIGHT click the connection icon on desktop (Properties or Connections) and selecting Properties.
If this is an ethernet connection, and if your cable modem's ethernet interface is not specifically listed as capable of full-duplex working (see list), click the button Configure below the adapter name.
Click the tab Advanced to bring it to the front:
In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.
In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (b) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.
Click OK to exit the Adapter settings.
Click OK to exit the Connection properties.
Close the Network and Dial-up Connections window.

Contact · Post by **Contact** » Tue Jul 09, 2002 2:37 pm

Thank you both,

I will get onto it right after I give you the following informaiton:

I initially altered the settings directly before installing TCPOptimizer, realizing you have install the initial settings I clicked on windows default booted the pc and then went back into the registry to delete all alterations I had initially made.

I am eager to get better downoading speeds as I remember faster.

With different TCP Receive settings tested, considering I download a 64mb file from ftp1.optonline.net and wait till the downoad is 50% complete: I get 184 KB/s.

The cable company claim 1500/128

Again thank you both.

Lobo · Post by **Lobo** » Tue Jul 09, 2002 2:41 pm

Thats not bad speed, what RWIN?

mnosteele52 · Post by **mnosteele52** » Tue Jul 09, 2002 2:46 pm

Originally posted by Lobo
Thats not bad speed, what RWIN?

Ditto, it's the same as 1472kb/s so stick with whatever RWIN you got that result with.

Contact · Post by **Contact** » Tue Jul 09, 2002 3:02 pm

On most of the RWIN settings. What do you think the best capability I should be getting is.

I changed as per your instructions: You find the setting in control panel> My networking places> Properties... I presume that is what you meant. Haven't got the connection icon on my desktop

The setting was set to Auto Mode and changed it to 10/Half Mode.

Anything would help

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:04 pm

10BaseT is good, use RWIN setting you had in test above

Contact · Post by **Contact** » Tue Jul 09, 2002 3:14 pm

Ok... I know have some sort of benchmark to take from.

Again thank you both for the help, is there any other possibility of going beyond that, like extreme?

Sorry for being greedy

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:18 pm

Extreme would just change RWIN to 513920 which I think would be alittle big for you but try it, change it back if it does not work

Greedy is cool

Contact · Post by **Contact** » Tue Jul 09, 2002 3:28 pm

LOLROF

I am going to try it... for sure. Through all this I did not ask important questions about TCPOptimizer :

What does "modify all network adapters" in TCPOptimizer do and is it a one off or can you keep it enabled?

When can I use the Extreme mode in the same program

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:30 pm

If you have a 56K modem installed, well I would leave it as is and yes try extreme apply changes reboot

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:33 pm

Another download site in help thread below

Contact · Post by **Contact** » Tue Jul 09, 2002 3:33 pm

I have a cable modem. The benchmark figures...were they for a cable modem???

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:35 pm

What are you talking about?

Contact · Post by **Contact** » Tue Jul 09, 2002 3:39 pm

I was wondering if this applied to 184 download of a 64mb file...ie 1472kb/s

Lodo wrote: "If you have a 56K modem installed, well I would leave it as is and yes try extreme apply changes reboot"

The other question was about "modify all network adapters" or not modify

Thank you...

Lobo · Post by **Lobo** » Tue Jul 09, 2002 3:40 pm

I would leave it alone

Contact · Post by **Contact** » Tue Jul 09, 2002 3:43 pm

I learnt today, thanks to you. Have a great day!

SG Broadband Community

Other Speed Test sites

Other Speed Test sites

Dear Lobo...please help

Lobo please could you help?

Lobo please could you help?

The help subject

Thank you both !!!!

Thank you both !!!! again...

Awe no....

Thanks a lot