to all that are up to the challenge,some CCNA test review questions :)

Networking, Wireless Routers (802.11 a/b/g/n/ac/ax WiFi), NAT, LAN configuration, equipment, cabling, hubs, switches, and general network discussion
Post Reply
newbie1
Advanced Member
Posts: 574
Joined: Tue Oct 16, 2001 11:35 pm

to all that are up to the challenge,some CCNA test review questions :)

Post by newbie1 »

Question 1:
During data transmission, which technique does TCP use in conjunction with windowing to guarantee that a stream of data sent from one device will be delivered to another device without duplication or data loss?
A. Recovery and flow control
B. Encapsulation and broadcasting
C. Acknowledgement and retransmission
D. Synchronization and acknowledgement

Question 2:
What correctly describes the five conversion steps of data encapsulation?
A. Data-segments-packets-frames-bits
B. Data-packets-segments-frames-bits
C. Data-frames-segments-packets-bits
D. Data-segments-frames-packets-bits

Question 3:
Which best describes the structure of a MAC address?
A. 16 bit network code plus 16 bit serial number
B. 16 bit vendor code plus 16 bit serial number
C. 24 bit vendor code plus 24 bit serial number
D. 24 bit network identity plus 24 bit host identity

Question 4:
Which of the following is true about a CSMA/CD network?
A. Signals are always sent in multi-frame broadcast mode.
B. One node's transmission goes to the nearest router that sends it directly to the destination.
C. Signals are sent directly to the destination if both the MAC and IP addresses are known by the source.
D. One node's transmission traverses the entire network and is seen and checked by every node.

Question 5:
Which best describes the function of the Physical Layer?
A. Provides network services to user applications.
B. Establishes, maintains, and manages sessions between applications.
C. Uses a MAC address to provide transmission across media and handles error notification, network topology, and flow control.
D. Provides electrical, mechanical, procedural and functional means for activating and maintaining links between systems.

Question 6:
Which network device provides internetworking and broadcast control?
A. Hub
B. Bridge
C. Ethernet switch
D. Router

Question 7:
Which Layer of the OSI model handles data encryption?
A. Application
B. Presentation
C. Session
D. Transport

Question 8:
Why has a layered network model been developed?
A. Stabilizes development times and reduces number of proprietary hardware schemes.
B. Takes a holistic approach to networking and encourages comprehensive engineering solutions.
C. Accelerates evolution, ensures interoperable technology and facilitates modular engineering.
D. Increases complexity and flexibility to deal with multiple sources of hardware.

Question 9:
Which Layer of the OSI model provides data representation and code formatting?
A. Application Layer
B. Presentation Layer
C. Session Layer
D. Transport Layer

Question 10:
Which technique controls the amount of unacknowledged data in transit at any one time and helps enable TCP reliability?
A. Windowing
B. Broadcasting
C. Error recovery
D. Collision avoidance

Question 11:
What are the most common LAN technologies used in networking today?
A. Ethernet, token ring, DecNET
B. Ethernet, token ring, FDDI
C. Ethernet, DecNET, FDDI
D. Ethernet, token ring, ARCnet

Question 12:
Where is the Layer 2 address found on a workstation?
A. In the routing table
B. On the network interface card
C. In the name server table
D. It is located on the DHCP server

Question 13:
What best describes the functions of the Application Layer?
A. Establishes, manages, and terminates applications?
B. Supports communicating components of applications such as e-mail
C. Defines end-to-end delivery of packets
D. Translates between different data formats such as ASCII and EBCDIC

Question 14:
Host A and host Z are on different subnets. If an ARP request is sent from host A in search of host Z's MAC address, what will happen?
A. There will be no response.
B. The router will respond with the MAC address of host Z.
C. The router will respond with it's own MAC address.
D. The router will forward the request to the correct subnet so host Z can respond.

Question 15:
What happens if host A broadcasts an ARP request looking for the MAC address of host B which is located on the same network as host A?
A. The name server looks at the request and replies with the MAC address of host B.
B. All devices look at the request and any device will reply with the IP address of host B.
C. All devices look at the request and ONLY host B will reply with the MAC address.
D. The nearest router looks at the request and replies with the MAC address of host B or forwards the request to another router.


Question 16:
Which network device offers full-duplex, dedicated bandwidth to segments or desktops?
A. Hub
B. Bridge
C. Ethernet switch
D. Router

Question 17:
If a Class B network is subnetted with a mask of 255.255.240.0, how many useable subnets are created?
A. 2
B. 6
C. 14
D. 30

Question 18:
Which OSI Layer determines best path selection?
A. Transport Layer
B. Network Layer
C. Data Link Layer
D. Physical Layer

Question 19:
What is the data-link destination address of a broadcast message?
A. 111.111.111.111
B. 255.255.255.255
C. AAAA.AAAA.AAAA
D. FFFF.FFFF.FFFF

Question 20:
Network File System (NFS), SQL, and X Window System all operate at which Layer of the OSI Model?
A. Application
B. Presentation
C. Session
D. Transport

Question 21:
What happens after a collision has occurred on a network after the jam signal is sent?
A. The router clears the route and notifies the source to resend
B. All stations stop sending frames for a randomly selected time period
C. A keepalive signal is generated to hold the message until the route clears
D. The source station waits for the collision to dissipate and then broadcasts an all clear

Question 22:
Which Layer of the OSI model is concerned with the topology of a network?
A. Transport
B. Network
C. Data Link
D. Physical


reply with your answers, i'll post up the correct answers soon
User avatar
therealcableguy
Advanced Member
Posts: 572
Joined: Tue Oct 10, 2000 12:00 am
Location: Kansas City

Post by therealcableguy »

1=a
2=a
3=c
4=d
5=d
6=d
7=b
8=c
9=b
10=a
11=b
12=b
13=a
14=d
15=c
16=c
17=c
18=b
19=d
20=c
21=b
22=d
The brave man is not he who feels no fear, For that were stupid and irrational; But he, whose noble soul its fears subdues, And bravely dares the danger nature shrinks from.
-Joanna Baille
newbie1
Advanced Member
Posts: 574
Joined: Tue Oct 16, 2001 11:35 pm

Post by newbie1 »

you almost got it, i'll post the answers, after a few more people give it a try :)
newbie1
Advanced Member
Posts: 574
Joined: Tue Oct 16, 2001 11:35 pm

Post by newbie1 »

btw, these are real questions from the cisco curriculum that im taking currently, just started semester 2
heckraiser

Post by heckraiser »

ok here are my answers

1. c
2. a
3. c
4. d
5. d
6. d
7. b
8. c
9. b
10. a
11. b
12. b
13. a
14. c
16. c
17. b
18. b
19. d
20. a
21. b
22. d
newbie1
Advanced Member
Posts: 574
Joined: Tue Oct 16, 2001 11:35 pm

Post by newbie1 »

when one more person takes it, and replies their answers, i'll post my answers
FlyingMonkey
Regular Member
Posts: 109
Joined: Sat May 20, 2000 12:00 am
Location: trailer park in the bushes

Post by FlyingMonkey »

Originally posted by newbie1
btw, these are real questions from the cisco curriculum that im taking currently, just started semester 2
lol.. now you get to learn router commands. that's FUN FUN stuff.. :p just remember banner motd .. that's all that's important :p
newbie1
Advanced Member
Posts: 574
Joined: Tue Oct 16, 2001 11:35 pm

Post by newbie1 »

Originally posted by FlyingMonkey


lol.. now you get to learn router commands. that's FUN FUN stuff.. :p just remember banner motd .. that's all that's important :p

yeah its pretty fun so far :)


well i got bored, and those were close answers, i just did the homework, and here are the answers i came up with:

1=c
2=a
3=c
4=d
5=d
6=d
7=b
8=c
9=b
10=a
11=b
12=b
13=b
14=c
15=c
16=c
17=c
18=b
19=d
20=c
21=b
22=c
Post Reply