drive covers

m4a2t0t · Post by **m4a2t0t** » Fri Jan 11, 2002 8:29 pm

where can i find drive bay covers for my antec?

as u can see their not straight

i just threw this together a few minutes ago

MagicMikey · Post by **MagicMikey** » Fri Jan 11, 2002 9:18 pm

Here's a tip; remove the cover from your case as well as the temperature monitors. Tightly place ONE piece of masking tape over the outside of the cover and rest it on your work desk with the tape side touching the desk. Fill in the crooked hole with epoxy glue and let it FULLY dry, usually 24 hours. Remove the tape and cut it up again so that it's straight!

works great!

m4a2t0t · Post by **m4a2t0t** » Fri Jan 11, 2002 9:23 pm

good idea

thanks

MagicMikey · Post by **MagicMikey** » Fri Jan 11, 2002 9:38 pm

What kind of paint is that anyway? do scratches show up on it easily....considering it's so shiny...

m4a2t0t · Post by **m4a2t0t** » Fri Jan 11, 2002 10:04 pm

its rustolem enamel

i need to do some work on the front panels,need to get those bumps out

MagicMikey · Post by **MagicMikey** » Fri Jan 11, 2002 10:22 pm

Ya, that's what I was about to say....heh, it sure can't be car paint I said...

Roody · Post by **Roody** » Sat Jan 12, 2002 2:50 pm

hey m0a2t4t, where did you get those temperature gauges and how did you rig that up?

m4a2t0t · Post by **m4a2t0t** » Sat Jan 12, 2002 2:55 pm

i bought the temp probes from http://www.2cooltek.com $12 each,much more reliable way to measure cpu temps

one sits next to the cpu core and the other sits between the northbridge and the ram

RoundEye · Post by **RoundEye** » Sat Jan 12, 2002 3:16 pm

m0a2t4t,

I built a couple of servers at work and I think we used those cases.

If you can post a picture of the back side of one of the covers, I can look and see if we have any spares left over.

Roody · Post by **Roody** » Sat Jan 12, 2002 3:18 pm

Originally posted by m0a2t4t
i bought the temp probes from http://www.2cooltek.com $12 each,much more reliable way to measure cpu temps

one sits next to the cpu core and the other sits between the northbridge and the ram

dont suppose you could post a pic showing how you set that up inside? I am starting to build my first here soon and would be very interested in getting those temp probes.

m4a2t0t · Post by **m4a2t0t** » Sat Jan 12, 2002 3:39 pm

RoundEye · Post by **RoundEye** » Sat Jan 12, 2002 3:57 pm

I'll check Tuesday, I have to go to a client's office to do some work Monday, so I won't be at the office.

If I have one or two, does $5 sound fair to cover the shipping to you?

m4a2t0t · Post by **m4a2t0t** » Sat Jan 12, 2002 3:58 pm

Originally posted by RoundEye
I'll check Tuesday, I have to go to a client's office to do some work Monday, so I won't be at the office.

If I have one or two, does $5 sound fair to cover the shipping to you?

that would be awesome

RoundEye · Post by **RoundEye** » Sun Jan 20, 2002 11:21 am

I don't have that exact cover, but I found one that had four clamps, on the corners, like the one you have pictured. Soon as I can find another web host, I'll post a pic.

..... Just wanted to let you know I didn't forget. :2cool:

YARDofSTUF · Post by **YARDofSTUF** » Sun Jan 20, 2002 2:46 pm

i have 2 antec 1030 covers

m4a2t0t · Post by **m4a2t0t** » Sun Jan 20, 2002 8:18 pm

can i purchase them from u??

Mehmet · Post by **Mehmet** » Thu Jan 24, 2002 11:34 pm

Originally posted by m0a2t4t
can i purchase them from u??

i think i got some too, ALSO! Im building a comp for a friend of mine tommorrow, with the antec case. that'll give me some covers also..

If ya want, ill send em for free, just pay for the shipping or something

m4a2t0t · Post by **m4a2t0t** » Fri Jan 25, 2002 12:54 am

Originally posted by vegeto

i think i got some too, ALSO! Im building a comp for a friend of mine tommorrow, with the antec case. that'll give me some covers also..

If ya want, ill send em for free, just pay for the shipping or something

that would be sweet!
thanks