Hiya ppl
I was just wondering if i can make my connection even better....
So i just installed the sg tweaks for win200/XP
And this is wat came out:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 52 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
So if somebody has got some advise for me would be great....
Running windows Xp Pro. with 196mb ram on a celly 400.
And my isp is @home.
Hope this will be enough....
TnX in advance
ShArKeY
Can somebody help me with this settings??
Take this speed test http://www.speakeasy.net/popfaq and choose a location that is closest to you. If you're speed is at or near your cap then you're looking good.
"A never ending quest for knowledge as with knowledge comes wisdom"
Main System running Windows XP Pro: Intel Celeron 2.4 Ghz, 1 Gig Ram, 2 80 gig WD 7200 rpm HD's, Radeon 9200 Pro, Envision EN9110 19" LCD Display, HP 9500 CD-RW, D-Link DFE-530TX+ PCI Adapter, D-Link DI-704P Router, Motorola SB5100 Cable Modem with Cox HSI
Main System running Windows XP Pro: Intel Celeron 2.4 Ghz, 1 Gig Ram, 2 80 gig WD 7200 rpm HD's, Radeon 9200 Pro, Envision EN9110 19" LCD Display, HP 9500 CD-RW, D-Link DFE-530TX+ PCI Adapter, D-Link DI-704P Router, Motorola SB5100 Cable Modem with Cox HSI