Bios setting on abit kg7 RAID
Bios setting on abit kg7 RAID
I had set my abit kg7 raid bios to memory>8884841222 and chipset >3310 and I can O/C my 1400 t-bird to 9.5X170FSB, prior to the setting, highest I can go is 138FSB, is the above setting sounds ok, thanks in advance. 
Samsung 760v TFT @ 1280 X 1024 32 bit
Lian-Li PC67 with 2 80mm U1A / 2 HD cooler intake and 1 80mm H1A / 1 80mm ADDA exhaust
NF7-S v2.0 (BIOS 18) (SATA 10033) (nforce pack 2.45) AS2 on NB Heat sink on SB
Alpha PAL 8045 with Thermaltake Smart Fan (blowing away from HS)
XP2500+ Barton/AQXEA (9) 0323/11X200/AS2/Vcore 1.725/DDR 2.6/Chipset 1.7/Agp 1.5/Idle 36/Load 51
Mushkin blk lvlII DDR3200 2X256MB 11-2-2-2 DC
IDE 1 master Plextor CDRW 24X
IDE 2 master Sony DRU510A DVD+/- r/rw CDRW
Sata Raid 2X IBM 60GB GXP60
Sony Floppy
ATI Radeon 8500 128MB DDR (retail) Infineon 3.6ns @ 275/275 BlueORB/RamSink CATALYST™ 3.6
PCI 3 ATA 100 PCI card WD SE 80GB/Zip100
5X round ide cable
Sparkle 400w with 1 80mm U1A fan
On cable modem and Dlink DI-614+ router with speed patch
Windows XP pro (NTFS)(SP1)
3Dmark2001se 12300
Lian-Li PC67 with 2 80mm U1A / 2 HD cooler intake and 1 80mm H1A / 1 80mm ADDA exhaust
NF7-S v2.0 (BIOS 18) (SATA 10033) (nforce pack 2.45) AS2 on NB Heat sink on SB
Alpha PAL 8045 with Thermaltake Smart Fan (blowing away from HS)
XP2500+ Barton/AQXEA (9) 0323/11X200/AS2/Vcore 1.725/DDR 2.6/Chipset 1.7/Agp 1.5/Idle 36/Load 51
Mushkin blk lvlII DDR3200 2X256MB 11-2-2-2 DC
IDE 1 master Plextor CDRW 24X
IDE 2 master Sony DRU510A DVD+/- r/rw CDRW
Sata Raid 2X IBM 60GB GXP60
Sony Floppy
ATI Radeon 8500 128MB DDR (retail) Infineon 3.6ns @ 275/275 BlueORB/RamSink CATALYST™ 3.6
PCI 3 ATA 100 PCI card WD SE 80GB/Zip100
5X round ide cable
Sparkle 400w with 1 80mm U1A fan
On cable modem and Dlink DI-614+ router with speed patch
Windows XP pro (NTFS)(SP1)
3Dmark2001se 12300
- RoundEye
- Posts: 18219
- Joined: Sun Jul 16, 2000 12:00 am
- Location: In a dry but moldy New Orleans, Louisiana
There's some really good info on that board at this site. One thread has all the bios settings you need. I forget if it's in the overclocking or abit section though.
Sliding down the banister of life ..........................
Thanks for the info.
Originally posted by RoundEye
There's some really good info on that board at this site. One thread has all the bios settings you need. I forget if it's in the overclocking or abit section though.
Samsung 760v TFT @ 1280 X 1024 32 bit
Lian-Li PC67 with 2 80mm U1A / 2 HD cooler intake and 1 80mm H1A / 1 80mm ADDA exhaust
NF7-S v2.0 (BIOS 18) (SATA 10033) (nforce pack 2.45) AS2 on NB Heat sink on SB
Alpha PAL 8045 with Thermaltake Smart Fan (blowing away from HS)
XP2500+ Barton/AQXEA (9) 0323/11X200/AS2/Vcore 1.725/DDR 2.6/Chipset 1.7/Agp 1.5/Idle 36/Load 51
Mushkin blk lvlII DDR3200 2X256MB 11-2-2-2 DC
IDE 1 master Plextor CDRW 24X
IDE 2 master Sony DRU510A DVD+/- r/rw CDRW
Sata Raid 2X IBM 60GB GXP60
Sony Floppy
ATI Radeon 8500 128MB DDR (retail) Infineon 3.6ns @ 275/275 BlueORB/RamSink CATALYST™ 3.6
PCI 3 ATA 100 PCI card WD SE 80GB/Zip100
5X round ide cable
Sparkle 400w with 1 80mm U1A fan
On cable modem and Dlink DI-614+ router with speed patch
Windows XP pro (NTFS)(SP1)
3Dmark2001se 12300
Lian-Li PC67 with 2 80mm U1A / 2 HD cooler intake and 1 80mm H1A / 1 80mm ADDA exhaust
NF7-S v2.0 (BIOS 18) (SATA 10033) (nforce pack 2.45) AS2 on NB Heat sink on SB
Alpha PAL 8045 with Thermaltake Smart Fan (blowing away from HS)
XP2500+ Barton/AQXEA (9) 0323/11X200/AS2/Vcore 1.725/DDR 2.6/Chipset 1.7/Agp 1.5/Idle 36/Load 51
Mushkin blk lvlII DDR3200 2X256MB 11-2-2-2 DC
IDE 1 master Plextor CDRW 24X
IDE 2 master Sony DRU510A DVD+/- r/rw CDRW
Sata Raid 2X IBM 60GB GXP60
Sony Floppy
ATI Radeon 8500 128MB DDR (retail) Infineon 3.6ns @ 275/275 BlueORB/RamSink CATALYST™ 3.6
PCI 3 ATA 100 PCI card WD SE 80GB/Zip100
5X round ide cable
Sparkle 400w with 1 80mm U1A fan
On cable modem and Dlink DI-614+ router with speed patch
Windows XP pro (NTFS)(SP1)
3Dmark2001se 12300