licking balls

SpeedDemonCable · Post by **SpeedDemonCable** » Sun Oct 14, 2001 3:37 pm

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 119 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

Can someone help me im using windows xp P3 450 256megs of ram...Cable @home i want my windows xp default settings not this useless gay patch that just F*cked my speed to hell!!

funky · Post by **funky** » Sun Oct 14, 2001 3:40 pm

If you couldn't even install the patches right... How can you blame Us if you didn't use the FULL settings?

SpeedDemonCable · Post by **SpeedDemonCable** » Sun Oct 14, 2001 3:43 pm

I did use the sg speed patch and web patch and the cablenut crap and did what lobo told me and my speed is ****in **** now i used to get 800kb/s at least and 90kb/s upload
now its ****ing bull**** speed like 200kb/s and 35kb/s something like ****in that eh.. so i dont know man someone give me the ****in defualt setting from XP

funky · Post by **funky** » Sun Oct 14, 2001 3:46 pm

From the test, shows clearly that you didn't follow the steps correctly. Open Cablenut, Put 1 in TCP13230pts, and reboot. Try this, and if the speed continues to go down, then I will give you the patch to default settings, but you WILL hate me for doing that.

SpeedDemonCable · Post by **SpeedDemonCable** » Sun Oct 14, 2001 3:51 pm

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 119 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

funky · Post by **funky** » Sun Oct 14, 2001 3:52 pm

Now getting a hang of things. Open Cablenut, delete tweaks at the bottom, and reinstall the SG patches ONLY.

SpeedDemonCable · Post by **SpeedDemonCable** » Sun Oct 14, 2001 3:56 pm

TCP options string = 020405b40103030201010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 55 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

funky · Post by **funky** » Sun Oct 14, 2001 3:58 pm

Follow the directions in the NIC buffer tweaks below. Reboot afterwards.

SpeedDemonCable · Post by **SpeedDemonCable** » Sun Oct 14, 2001 4:07 pm

DUH? ok man

Lobo · Post by **Lobo** » Sun Oct 14, 2001 4:12 pm

SpeedDemonCable, Glad someone else is helping you, people who follow my directions or help thread have no problems so that only leaves one thing, RIGHT

DEVX2K · Post by **DEVX2K** » Mon Oct 15, 2001 2:18 am

if this guy was connecting at 800 kbps before what tweaks did he need?!!!!!!!!!!!!!!!!!!!

2Bullish · Post by **2Bullish** » Mon Oct 15, 2001 9:29 am

if this guy was connecting at 800 kbps before what tweaks did he need?!!!!!!!!!!!!!!!!!!!

Errmmm he needs braintweak.zip

and thecalmpatch.zip uber patch and lets not forget the....

readtheinstructionscarefully.zip patch (this one needs to be installed first.

2Bullish

Phantom-Vortex · Post by **Phantom-Vortex** » Mon Oct 15, 2001 9:50 pm

He said he was licking balls...........