help

cij · Post by **cij** » Wed Sep 05, 2001 5:57 pm

TCP options string = 0204059c01010402

MTU = 1476
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.

MSS = 1436
Maximum useful data in each packet = 1436, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 32767
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 32767
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
505472 (MSS x 44 * scale factor of 8)
252736 (MSS x 44 * scale factor of 4)
126368 (MSS x 44 * scale factor of 2)
63184 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 1310.68 kbps (163.835 KBytes/s) @ 200ms
Your RcvWindow limits you to: 524.272 kbps (65.534 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 114 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

41148 connections tested since 03.10.2001.
Analyzer version: Beta

whats do I need to do to change it for broadband connection . Thanks for ur help.

Lobo · Post by **Lobo** » Wed Sep 05, 2001 5:59 pm

Click on Help Thread & Tips below in signature and read, please leave your OS and system specs if you have not done so. Also if you have Cablenuts adjuster installed I need to know that. Take analyzer after you install speed patch an post results so I can see if patch is in. In my signature, Click on Test Tweak Here, Thank you and good luck.

How to post TCP/IP Test:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank
you.

Please leave system specs and Cable or DSL, OS, RAM, CPU Size

If you have router you need newest firmware to upgrade MTU

cij · Post by **cij** » Wed Sep 05, 2001 6:10 pm

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationMain siteForums ServerSG Gear Store
--------------------------------------------------------------------------------
SpeedGuide TeamsSG Folding@Home
--------------------------------------------------------------------------------
Cool Links">">">">">">">">">">
Wed Sep 05 16:52:39 2001.

SpeedGuide.net TCP/IP Analyzer
TCP properties for IP = 24.28.156.109 ()
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 5.5; Windows 98; Win 9x 4.90)

TCP options string = 0204059c01010402

MTU = 1476
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.

MSS = 1436
Maximum useful data in each packet = 1436, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 32767
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 32767
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
505472 (MSS x 44 * scale factor of 8)
252736 (MSS x 44 * scale factor of 4)
126368 (MSS x 44 * scale factor of 2)
63184 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 1310.68 kbps (163.835 KBytes/s) @ 200ms
Your RcvWindow limits you to: 524.272 kbps (65.534 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 114 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

41238 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

I have window Me ,1.2 athlon,384 ram and i have cable lobo. I dont have cablenut installed .

cij · Post by **cij** » Wed Sep 05, 2001 6:10 pm

where u download cablenut at ..did i download it lobo

Lobo · Post by **Lobo** » Wed Sep 05, 2001 6:13 pm

Follow directions in help thread, I don't know if you downloaded it or not, but it's not installed

cij · Post by **cij** » Wed Sep 05, 2001 6:20 pm

ok i downloaded it needed to restart ..he ya go:

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationTweaks & PatchesSG TCP/IP AnalyzerSetting up a LANSecurityBits and BytesInteresting StoriesAutologin with RRCable/DSL FAQTerms & DefinitionsCable / DSL LinksSG TCP/IP AnalyzerSG Analyzer FAQAdvanced TweaksSystem.ini IRQ TweakWindows 2000 Tweaks">">">
Wed Sep 05 17:05:39 2001.

SpeedGuide.net TCP/IP Analyzer
TCP properties for IP = 24.28.156.109 ()
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 5.5; Windows 98; Win 9x 4.90)

TCP options string = 0204059c01010402

MTU = 1476
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.

MSS = 1436
Maximum useful data in each packet = 1436, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 17232
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17232
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
505472 (MSS x 44 * scale factor of 8)
252736 (MSS x 44 * scale factor of 4)
126368 (MSS x 44 * scale factor of 2)
63184 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 689.28 kbps (86.16 KBytes/s) @ 200ms
Your RcvWindow limits you to: 275.712 kbps (34.464 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 114 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

41320 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

Lobo · Post by **Lobo** » Wed Sep 05, 2001 6:22 pm

Slow down, OK that's installed do you have router, who makes it

cij · Post by **cij** » Wed Sep 05, 2001 6:24 pm

hehe sorry man my bad . i have a linksys router 4 port switch 2 computer .

Lobo · Post by **Lobo** » Wed Sep 05, 2001 6:27 pm

Go here for newest firmware for router 1.39 at bottom of page here Then reboot, retest, MTU should be 150:)

cij · Post by **cij** » Wed Sep 05, 2001 6:41 pm

Wohooooo thx bro .I got another pc but its 98 can u help me in the 98 1 lobo ? here the Me :

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformation">">">">">">">">">">">">">">">">">">
Wed Sep 05 17:28:06 2001.

SpeedGuide.net TCP/IP Analyzer
TCP properties for IP = 24.162.177.201 ()
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 5.5; Windows 98; Win 9x 4.90)

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 114 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

41475 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

Lobo · Post by **Lobo** » Wed Sep 05, 2001 6:43 pm

Now go download and install SG's patches

cij · Post by **cij** » Wed Sep 05, 2001 6:50 pm

Lobo which speedguide patches ?Im in patches but which 1 for me :
sguide_tweak_98_ME ?
sguide_tweak_98_ME_PPPoE ?

Lobo · Post by **Lobo** » Wed Sep 05, 2001 6:52 pm

sguide_tweak_98_ME

cij · Post by **cij** » Wed Sep 05, 2001 7:02 pm

Lobo i d/l it and i right click on it and went to install and didnt do anything is that normal i did another test ,here it is:

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationTweaks & PatchesSG TCP/IP AnalyzerSetting up a LANSecurityBits and BytesInteresting StoriesAutologin with RRCable/DSL FAQTerms & DefinitionsCable / DSL Links">">">">">">">">
Wed Sep 05 17:47:59 2001.

SpeedGuide.net TCP/IP Analyzer
TCP properties for IP = 24.162.177.201 ()
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 5.5; Windows 98; Win 9x 4.90)

TCP options string = 020405b40103030201010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 50 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

41608 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

Lobo · Post by **Lobo** » Wed Sep 05, 2001 7:02 pm

Pick speed test site close to you from http://www.testmyspeed.com

Do the below only after your sure SG's patch is in, take analyzer test, if after it says RWIN it says 256960, patch is in, if not go back and read how to install, then the below, I've got ballgame to watch

For Win 9x bring up Cablenuts adjuster inside icon on desktop in box that says Cablenut,click on adjuster, in box that says DefaultRvcWindow take out number that is in there and put in one of these, 1 at a time, try:554800, 560640, 578160

Leave GlobalMaxTcpWindowSize blank
You do not have to show me but check analyzer here at SG to make sure RWIN is in, you will see number right after (RWIN) on analyzer
At bottom click save to registry, and REBOOT each time you change value in adjuster or it will not work.Click on tools at top of IE, internet options, delete files and offline files (This is safe, temp files) and click on clear history after EVERY test Fast speed test here
Speedtest may open another browser, so check taskbar and close other one, no other programs should be running, No AIM, ICQ, Virus scanner, Firewall, nothing

Ballgame was not on, but patch is in, good job

cij · Post by **cij** » Wed Sep 05, 2001 7:21 pm

Hey man I know ur watching ur ballgame so enjoy just wanted to Thank You Very Much for ur time for helping me appeciate it bro cya .:2cool: :2cool:

cij · Post by **cij** » Thu Sep 06, 2001 12:24 am

"For Win 9x bring up Cablenuts adjuster inside icon on desktop in box that says Cablenut,click on adjuster, in box that says DefaultRvcWindow take out number that is in there and put in one of these, 1 at a time, try:554800, 560640, 578160 "

Does this work for my window Me,Lobo?

funky · Post by **funky** » Thu Sep 06, 2001 12:29 am

I believe so, my friend.

Lobo · Post by **Lobo** » Thu Sep 06, 2001 7:15 am

Which computer are you working on now, the same one or the 98 one, need sys specs for 98 one

cij · Post by **cij** » Fri Sep 07, 2001 4:04 pm

"554800, 560640, 578160 " hey lobo do i use these numbers 1 at a time for my windows Me computer ?

Lobo · Post by **Lobo** » Fri Sep 07, 2001 4:16 pm

Different CPU's different numbers, but try and see if they work for you

cij · Post by **cij** » Fri Sep 07, 2001 7:57 pm

what number can i use for windows ME?

cij · Post by **cij** » Fri Sep 07, 2001 8:04 pm

which numbers can i use for window Me?

Lobo · Post by **Lobo** » Fri Sep 07, 2001 9:22 pm

These numbers foe ME pooter time, try:554800, 560640, 578160