after tweaking all day i am now able to spike at very high speeds, but it then falls back to what it was before.
anyone know a way to hold the speed?
unable to hold speed
-
Lobo
- SG VIP
- Posts: 17660
- Joined: Thu Nov 23, 2000 2:32 pm
- Location: Panama City, FL and a FAN of Dale Earnhardt Jr. Bud Chevy & NASCAR , and the Atlanta Braves
No you cannot maintain burst speeds, please do this and tell me your system specs:
Please click in my signature where it says Test your tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.
Please click in my signature where it says Test your tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.
TCP options string = 020405b40103030301010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 513920
RWIN Scaling (RFC1323) = 3 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 20556.8 kbps (2569.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 8222.72 kbps (1027.84 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 47 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 513920
RWIN Scaling (RFC1323) = 3 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 20556.8 kbps (2569.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 8222.72 kbps (1027.84 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 47 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
-
HatTrick
DSL Tweak
I have the same info as the user above after running the TCP/IP analyzer.
I am running Win2K Pro on a 500Mhz, PIII, with 384Mb RAM.
I spike up to 55Kb/sec on downloads then it drops back to about 168kb/sec.
I did the Win2K tweaks to the registry as posted on SG.
I tried downloading files from a bunch of different websites, all with the same result.
How do you get the downloads to hold at the higher rate?
I am running Win2K Pro on a 500Mhz, PIII, with 384Mb RAM.
I spike up to 55Kb/sec on downloads then it drops back to about 168kb/sec.
I did the Win2K tweaks to the registry as posted on SG.
I tried downloading files from a bunch of different websites, all with the same result.
How do you get the downloads to hold at the higher rate?