i just ran the test and this is what it came up with..
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 8760
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 8760
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 350.4 kbps (43.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 140.16 kbps (17.52 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 112 hops
TTL value is ok.
Now should i change my rwin and if so to what and how? i am a complete newb to tweaking adsl so any help would be appreciated. thanks
new to tweaking and need some help
-
LegionX
-
Lobo
-
pjdc
Hey X,
65535 / your MSS [1460] = 44.8869
The idea here is your RWIN should be a multiple of your MSS without going above 65535 [2^16]. So take the 44 (leave the remainder), and multiply the 1460 = 64240. This what I'd suggest as your min. RWIN setting. If you go to "large window" you multiply this by a power of 2 (that's the "scale factor"), not to exceed 2^30. If you are running Win 9x you will prob. need the "Vtcp.386" patch to enable large window support. Win95 is [236926USA5.EXE], and win98/98SE is [236926USA8.EXE]. Search on MS site.
If I'm half as much help as I'm trying to be... we're doing good... pjdc
65535 / your MSS [1460] = 44.8869
The idea here is your RWIN should be a multiple of your MSS without going above 65535 [2^16]. So take the 44 (leave the remainder), and multiply the 1460 = 64240. This what I'd suggest as your min. RWIN setting. If you go to "large window" you multiply this by a power of 2 (that's the "scale factor"), not to exceed 2^30. If you are running Win 9x you will prob. need the "Vtcp.386" patch to enable large window support. Win95 is [236926USA5.EXE], and win98/98SE is [236926USA8.EXE]. Search on MS site.
If I'm half as much help as I'm trying to be... we're doing good... pjdc
-
Lobo
-
LegionX
umm did i mention i am a newb? 
alot of what you said confused the hell out of me. do i download a registre patch or something to change those things you suggested or what? i am really new to tweaking software, hardware i do all the time but not software. so if you could in laymans terms start me out i would be grateful. thanks
also my specs and info are :
Telus adsl from BC, canada
1.5 meg down and 512kb up
Windows 98 SE
PIII 550@733
Asus p3v4x MB
256 133ram
Monster300mx
Matrox G400 32meg
not sure what other info you need so please ask ok
alot of what you said confused the hell out of me. do i download a registre patch or something to change those things you suggested or what? i am really new to tweaking software, hardware i do all the time but not software. so if you could in laymans terms start me out i would be grateful. thanks
also my specs and info are :
Telus adsl from BC, canada
1.5 meg down and 512kb up
Windows 98 SE
PIII 550@733
Asus p3v4x MB
256 133ram
Monster300mx
Matrox G400 32meg
not sure what other info you need so please ask ok
-
LegionX
-
Lobo
-
LegionX
-
Lobo
No I would not use it as I know you have to log in to use net on PPPoE, I think you have regular dsl service so download this speed patch:sguide_tweak_98_ME , it won't hurt any thing, Ill leave you some guide lines to follow:
First bring up REGEDIT, type REGEDIT in your run box and hit OK.
Under Registry at the top of the box, click on that, now click on Export Registry File, a box will come up asking where you want to export it to, just put it in your C drive, then name it at the bottem of box, Registry.
Click on save.
Now if you ever get in trouble or want the old regestry back, bring REGEDIT back up and click on Registry and click on import registry file, go to your C drive and click on registry and click open, reboot and your good to go.
Anytime you add a new program, backup again, any program, back it up to the same place as the last one, it will overwrite it. If you do not backup after each new program is instaled you will not have those setting's in regestry if you have to backup for some reason.
You really need to do this 2 times, 1-default registry to leave alone and 2 - the updated registry that you update after adding new programs. It's small won't take up much space, could save you from long night.
Do nothing else in this box as it is the heart of your computer, just what it says above and no more!!!!!!!!!!!!!
1. You probaly need to PRINT these instructions!!!!!!!!!!!! Please be carefull, Go to patch page this site off main page on left.
NOTE: If you are on PPPoE you have a patch and you also need Vtcp386 Fix if on Win 95/98/SE
If you are on PPPoE and running WIN2k you need to go to patch page.
2. Download the faster loading of webpages for your OS, 3. Download the speedpatch for your OS from patch page, becarefull, (Please read installation instructions for these patches on patch page). Please read how to install speed patch.
4. Download the back to default patch for your OS, do not install this patch, just download it in case you ever want to change patches. Please read instructions on patch and on how to install patch.This patch does not take your entire registry back to default, it just takes out what Speedguide patches put in.
5. Download Vtcp386 Fix patch if you are running WIN 95,98 or 98SE and install the correct one for your OS . Additionally, if your OS is Win 95, you will also need to download and install the vtcp386 for Win 95 and the Windows Socket Two patch.
6. Please come back to tweaking forum and take our tweak test/ TCP/IP
Analayzer. so I may see test results do this :
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Thank you.
7. I do not recommend adding any other patches, all these tests change by the minute so don't be fooled an start adding patch after patch.
8. The best time to test for speed is early in the morning when no one (or not many) people are on the net.
9. Nothing should be running during any test, no virus scanners, firewalls, ICQ, AIM, (NOTHING)
and always clear (Delete, no this will not harm your system) your temp internet files before each test, not once during testing, after each test.
10. Do not add other speed patches on top of each other, always go back to default before trying another patch, I am aware of only one patch that will remove previous patch without having to return to default and that is Cablenuts.
11. In the future, here are some other sites you may wish to visit, go to www.testmyspeed.com. Please bookmark that page as well as www.pcpitstop.com so you may return. All autofixs from pcpitstop are default settings. Also another good dowload site would be www.happypuppy.com click on 10 demos and a large download file, do not download the whole file, just most of it.
12. You may in the future wish to go to www.AnalogX.com and download Net Stat Live, run this while downloading a large file.
13. Please take your time and good luck. I would suggest at least 128 RAM and read up on all this, but be care full.
14. The most accurate way of testing speed is downloading large file as explained above from somewhere like www.happypuppy.com (not all of it, just most of it). All other speed test sites will vary, www.AOL.com is another fast server, you may download from this site also, remember to delete temp internet files before doing test. Try both sites as 1 may be having problems.
When refering to speed Kb is Kilobits, KB is Kilobytes Divide by 8 kilobits to get kilobytes.
Also you may wish to download Dr.TCP from http://www.dslreports.com/front/drtcp.html to adjust MSS, MTU. RWIN and other numbers in future, this is for advanced people and I do not recommend changing any numbers that patches put in.
RUN DEFRAG AT LEAST EVERY 2 DAYS
I understand Microsoft says run defrag every 2 weeks, but fragmented files slow you down, I have a program called Fix-it Utilities from www.ontrack.com that shows you whether you have fragmented files, I get fragmented files from just normal use so I defrag with this utility everyday, it takes about 30 seconds on 10 GIG hard drive, but if you wish to do it every 2 weeks thats up to you. You may put it in scheduled tasks to run, WIN 98/SE in taskbar, ME in control panel.
If you are running WIN 98 or SE, once a week run Sys file checker to make sure you have all your files, all you really need to worry about are Windows files and subfolders. Run, help for more information
DO NOT EXPECT TO BE FAST AT NIGHT(PEEK HOURS)
Check back for updates
How do do speed test
1. The best time is early in the morning (3 AM - 6 AM)
2. Make sure defrag has been run so no files are fragmented
3. Delete Temp internet files, not while testing, but after each test. IE browser, click tools, internet options, click on delete files and no this will not harm system, just get rid of temp files
4. Go to a fast server such as www.happypuppy.com and click on 10 demos, select a LARGE file to download (not all of it , just most of it, before you click cancel) this will show you how fast you are downloading, it's not going to be quick except except early in morning when not many people on net. I recommend you go to www.analogX.com and download Net State live, run this while downloading as it will give you avg of your download speed, really all you need on Net Stat is incoming data, incoming totals and Local machine, right click on Net Stat anywhere, stactics and check these 3 items, the rest need not be checked unless you want them, all you care about is average.
Put system defrag in scheduled tasks to run everyday.
5. Probably the most important, nothing can be running during test, no firewalls, no virus stuff, no ICQ, no AIM (some of you may have to go into BIOS to disable virus scanner, nothing running except Net Stat live
Scheduled tasks will run disk defrag, 98 & SE in Taskbar, WIN ME in control panel
The people who want speed surfing or doing whatever must close all other programs.
(NOTE: at present time www.AOL.com seems to be fastest download site, at bottom download aol 6.0)
Or if you wish you may go to www.testmyspeed.com and do one of the online tests, these vary to much for me but you may like them. Another one is at www.dslreports.com/tools
First bring up REGEDIT, type REGEDIT in your run box and hit OK.
Under Registry at the top of the box, click on that, now click on Export Registry File, a box will come up asking where you want to export it to, just put it in your C drive, then name it at the bottem of box, Registry.
Click on save.
Now if you ever get in trouble or want the old regestry back, bring REGEDIT back up and click on Registry and click on import registry file, go to your C drive and click on registry and click open, reboot and your good to go.
Anytime you add a new program, backup again, any program, back it up to the same place as the last one, it will overwrite it. If you do not backup after each new program is instaled you will not have those setting's in regestry if you have to backup for some reason.
You really need to do this 2 times, 1-default registry to leave alone and 2 - the updated registry that you update after adding new programs. It's small won't take up much space, could save you from long night.
Do nothing else in this box as it is the heart of your computer, just what it says above and no more!!!!!!!!!!!!!
1. You probaly need to PRINT these instructions!!!!!!!!!!!! Please be carefull, Go to patch page this site off main page on left.
NOTE: If you are on PPPoE you have a patch and you also need Vtcp386 Fix if on Win 95/98/SE
If you are on PPPoE and running WIN2k you need to go to patch page.
2. Download the faster loading of webpages for your OS, 3. Download the speedpatch for your OS from patch page, becarefull, (Please read installation instructions for these patches on patch page). Please read how to install speed patch.
4. Download the back to default patch for your OS, do not install this patch, just download it in case you ever want to change patches. Please read instructions on patch and on how to install patch.This patch does not take your entire registry back to default, it just takes out what Speedguide patches put in.
5. Download Vtcp386 Fix patch if you are running WIN 95,98 or 98SE and install the correct one for your OS . Additionally, if your OS is Win 95, you will also need to download and install the vtcp386 for Win 95 and the Windows Socket Two patch.
6. Please come back to tweaking forum and take our tweak test/ TCP/IP
Analayzer. so I may see test results do this :
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Thank you.
7. I do not recommend adding any other patches, all these tests change by the minute so don't be fooled an start adding patch after patch.
8. The best time to test for speed is early in the morning when no one (or not many) people are on the net.
9. Nothing should be running during any test, no virus scanners, firewalls, ICQ, AIM, (NOTHING)
and always clear (Delete, no this will not harm your system) your temp internet files before each test, not once during testing, after each test.
10. Do not add other speed patches on top of each other, always go back to default before trying another patch, I am aware of only one patch that will remove previous patch without having to return to default and that is Cablenuts.
11. In the future, here are some other sites you may wish to visit, go to www.testmyspeed.com. Please bookmark that page as well as www.pcpitstop.com so you may return. All autofixs from pcpitstop are default settings. Also another good dowload site would be www.happypuppy.com click on 10 demos and a large download file, do not download the whole file, just most of it.
12. You may in the future wish to go to www.AnalogX.com and download Net Stat Live, run this while downloading a large file.
13. Please take your time and good luck. I would suggest at least 128 RAM and read up on all this, but be care full.
14. The most accurate way of testing speed is downloading large file as explained above from somewhere like www.happypuppy.com (not all of it, just most of it). All other speed test sites will vary, www.AOL.com is another fast server, you may download from this site also, remember to delete temp internet files before doing test. Try both sites as 1 may be having problems.
When refering to speed Kb is Kilobits, KB is Kilobytes Divide by 8 kilobits to get kilobytes.
Also you may wish to download Dr.TCP from http://www.dslreports.com/front/drtcp.html to adjust MSS, MTU. RWIN and other numbers in future, this is for advanced people and I do not recommend changing any numbers that patches put in.
RUN DEFRAG AT LEAST EVERY 2 DAYS
I understand Microsoft says run defrag every 2 weeks, but fragmented files slow you down, I have a program called Fix-it Utilities from www.ontrack.com that shows you whether you have fragmented files, I get fragmented files from just normal use so I defrag with this utility everyday, it takes about 30 seconds on 10 GIG hard drive, but if you wish to do it every 2 weeks thats up to you. You may put it in scheduled tasks to run, WIN 98/SE in taskbar, ME in control panel.
If you are running WIN 98 or SE, once a week run Sys file checker to make sure you have all your files, all you really need to worry about are Windows files and subfolders. Run, help for more information
DO NOT EXPECT TO BE FAST AT NIGHT(PEEK HOURS)
Check back for updates
How do do speed test
1. The best time is early in the morning (3 AM - 6 AM)
2. Make sure defrag has been run so no files are fragmented
3. Delete Temp internet files, not while testing, but after each test. IE browser, click tools, internet options, click on delete files and no this will not harm system, just get rid of temp files
4. Go to a fast server such as www.happypuppy.com and click on 10 demos, select a LARGE file to download (not all of it , just most of it, before you click cancel) this will show you how fast you are downloading, it's not going to be quick except except early in morning when not many people on net. I recommend you go to www.analogX.com and download Net State live, run this while downloading as it will give you avg of your download speed, really all you need on Net Stat is incoming data, incoming totals and Local machine, right click on Net Stat anywhere, stactics and check these 3 items, the rest need not be checked unless you want them, all you care about is average.
Put system defrag in scheduled tasks to run everyday.
5. Probably the most important, nothing can be running during test, no firewalls, no virus stuff, no ICQ, no AIM (some of you may have to go into BIOS to disable virus scanner, nothing running except Net Stat live
Scheduled tasks will run disk defrag, 98 & SE in Taskbar, WIN ME in control panel
The people who want speed surfing or doing whatever must close all other programs.
(NOTE: at present time www.AOL.com seems to be fastest download site, at bottom download aol 6.0)
Or if you wish you may go to www.testmyspeed.com and do one of the online tests, these vary to much for me but you may like them. Another one is at www.dslreports.com/tools
-
LegionX
thank you for that reply
ok i dont know if this messed anything up but before you posted i installed the pppoe version but after reading your post i used the defualt patch and then installed the non pppoe patch. hope that was the correct way to do it. i redid the analyser and this is what it said:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 48 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
does this look good?
ok i dont know if this messed anything up but before you posted i installed the pppoe version but after reading your post i used the defualt patch and then installed the non pppoe patch. hope that was the correct way to do it. i redid the analyser and this is what it said:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.
Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 48 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
does this look good?
-
Lobo
-
LegionX