hey lobo
is this good ????
plez reply back...i want more speed!!!
im running windows me, dsl, umm wat else u want to kno ??
TCP options string = 0204058601010402
MTU = 1454
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1414
Maximum useful data in each packet = 1414, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.
Default Receive Window (RWIN) = 16968
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 16968
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
520352 (MSS x 46 * scale factor of 8)
260176 (MSS x 46 * scale factor of 4)
130088 (MSS x 46 * scale factor of 2)
65044 (MSS x 46)
bandwidth * delay product:
Your RcvWindow limits you to: 678.72 kbps (84.84 KBytes/s) @ 200ms
Your RcvWindow limits you to: 271.488 kbps (33.936 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 117 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349)= 00000000
54054 connections tested since 03-10-2001, 14
LOBO ??????
Looks like your running Enternet pppoe software you might want to check this FAQ that I put up if not the first half the second on just the registry adjustment...
For the MaxFrameSize.. http://forums.speedguide.net/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=14&t=000138
Your Rwin might be a touch small but then again what speed is this connection supposed to be.
For the MaxFrameSize.. http://forums.speedguide.net/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=14&t=000138
Your Rwin might be a touch small but then again what speed is this connection supposed to be.
