Problem after upgrade RT314

Charlie · Post by **Charlie** » Wed Mar 07, 2001 9:28 pm

Just hooked up router today.Everything seemed fine......I could connect to the net send and receive e-mail all was well.Then I decided to upgrade the software to version 3.24 all seemed to go well (file received ok)But now I can't get back in to the Set up Wizard.
I open up browser type in the address (192.168.0.1 just like before plus the login)and the page loads up BUT only half of it.The Right side.The Left side were you can pick Setup Wizard...Advance...Does Not show up.

How can That be fixed? I can still connect and receive e-mail. But I can't get that page to load correctly.
I'm running win Me with Optonline cable

Thanks
Charlie

glc1 · Post by **glc1** » Wed Mar 07, 2001 9:38 pm

Where did you get 3.24 from? It's not even listed on Netgear's site?

Did you try flashing back?

[ 03-07-2001: Message edited by: glc1 ]

Charlie · Post by **Charlie** » Wed Mar 07, 2001 10:18 pm

Read This Post At DSLreports
I downloaded it lastnite. knowing that I was going to hook up the router today.I guess I should have read MORE.....

Charlie

Charlie · Post by **Charlie** » Wed Mar 07, 2001 11:24 pm

it's fixed Redid it step by step the only thing I did differnt this time was to clear my temp file and cache.

Charlie

glc1 · Post by **glc1** » Thu Mar 08, 2001 1:23 am

I just flashed to 3.24.
Lots of html page additions. Makes things easy.

MegaVectra · Post by **MegaVectra** » Thu Mar 08, 2001 4:50 am

The v3.24 firmware fixes the abiltiy to get to my sb3100 cable modem's internal configuration page (192.168.100.1). Never was able to do that before, unless I removed the router.

phweak · Post by **phweak** » Sun Apr 01, 2001 5:24 pm

Where did u get v3.24?

nightowl · Post by **nightowl** » Sun Apr 01, 2001 6:56 pm

Originally posted by phweak:
Where did u get v3.24?

goto netgears site and just type in 314, then it will show up

for all you guys who upgrade to 3.24

CLEAR YOUR INTERNET CASH

[ 04-01-2001: Message edited by: nightowl ]

Myzhi · Post by **Myzhi** » Tue Apr 03, 2001 11:13 am

"I open up browser type in the address (192.168.0.1 just like before plus the login)and the page loads up BUT only half of it.The Right side.The Left side were you can pick Setup Wizard...Advance...Does Not show up.
How can That be fixed? I can still connect and receive e-mail. But I can't get that page to load correctly.
I'm running win Me with Optonline cable"

Delete your browser's cache, and go back to the page. Your browser is still using the old page.

nightowl · Post by **nightowl** » Tue Apr 03, 2001 9:26 pm

Originally posted by Myzhi:

Delete your browser's cache, and go back to the page. Your browser is still using the old page.

didn't i say that

spennine · Post by **spennine** » Fri Apr 20, 2001 8:39 am

After flashing the ROM, reboot the router, then reboot the LAN PC's.

I found that this is needed for most changes to either the router configuration, or local LAN PC configurations.

The suggestion to flush web page cache is another potential solution.