upstream power

Get help and discuss anything related to tweaking your internet connection, as well as the different tools and registry patches on the site. TCP Optimizer settings and Analyzer results should be posted here.
Post Reply
User avatar
shadowklr
Member
Posts: 38
Joined: Wed Dec 19, 2007 12:52 am

upstream power

Post by shadowklr »

hi i heard if you have an upstream power of 58+ ur connection is bad, this is how mines is, is there any problem?


Configuration Manager
Status Signal Addresses Configuration Logs Help
This page provides information about the current upstream and downstream signal status of your Cable Modem.

Downstream Value
Frequency 663000000 Hz
Signal to Noise Ratio 37 dB
QAM QAM256
Network Access Control Object ON
Power Level -1 dBmV
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 31
Frequency 27000000 Hz
Ranging Service ID 763
Symbol Rate 2.560 Msym/s
Power Level 56 dBmV

Status | Signal | Addresses | Configuration | Logs | Help
© Copyright 1997-2000

i have a 10 mbps dl speed and a 1.5 mbps upload speed, and i usually only download at 250 KB/s
User avatar
trogers
SG VIP
Posts: 12323
Joined: Wed Jan 26, 2005 11:14 pm
Location: Bangkok, Thailand

Post by trogers »

Get your ISP to service your cable line and tune your modem.
"Contentment is not the fulfillment of what you want, but is the realisation of how much you already have" - anon
Post Reply