TCP options string = 0204059801010402
MTU = 1472
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.
MSS = 1432
Maximum useful data in each packet = 1432, which equals MSS.
Default TCP Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65535
Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
504064 (MSS x 44 * scale factor of 8)
252032 (MSS x 44 * scale factor of 4)
126016 (MSS x 44 * scale factor of 2)
63008 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your TCP Window limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 59 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000 (240)
Precedence (priority) = 111 (Network Control)
Delay = 1 (low delay)
Throughput = 0 (normal throughput)
Reliability = 0 (normal reliability)
Cost = 0 (normal cost)
Check bit = 0 (correct, 8th checking bit must be zero)
DiffServ (RFC 2474) = No valid DiffServ equivalent. See the TCP Optimizer documentation, or RFCs 2474, 2475, 2597, 2598, 2873.