Question?

Xzaver · Post by **Xzaver** » Fri Dec 15, 2000 3:36 pm

I had A ubr 900 Cisco , I'm kind of upset I had to replace it because of the back of the modem was worn , so What happend was they ended up giving me a Surf Board3100.

Should I have kept the Cisco even though I was having problems ?

All has not been well.

Macman76 · Post by **Macman76** » Fri Dec 15, 2000 3:40 pm

To be honest keep the GI SB3100 It's a good modem, and at least you'll know there is a problem with service.

------------------
"You might be able to bring me down, but I'll come back to haunt you"

Xzaver · Post by **Xzaver** » Fri Dec 15, 2000 4:08 pm

The cable tec also left me with some info , maybe valueable or not i don't know.

An IP adress that goes to a Surfboard Configuration Manager ???

Whats this all about ?

Macman76 · Post by **Macman76** » Fri Dec 15, 2000 6:06 pm

Personally I wouldn’t worry about GI 3100SB has its own IP address and 2 Different Mac Address. The only reason this could be important is one to check to see if your modem is on online, and too if you ever need to get your modem provisioned.

------------------
"You might be able to bring me down, but I'll come back to haunt you"

Xzaver · Post by **Xzaver** » Fri Dec 15, 2000 6:45 pm

Macman , Thanks for all your help.

Now if i had the oportunity to buy a UBR904 Cisco should I ?

Or would you rather recomend a 3com Sharkfin ?

I mean it seemed like with my Cisco when I first got it my Speeds were unbilievable I was hitting 900K ! , Now ugh < sigh > it feels more like 90K

Thanks again
~X~