TCP properties for IP Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 118 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
Here are my settings. I'm running XP on Cox cable, speed is advertised at 3000/256. My speed at present showed 2511/189. I was much closer to 3000/ 256 on ME. I know I'm leaving something out. Do I need a different version of cablenut? Since I had ME, sorry for the dumb questions.Replies are appreciated. It's way late here
reeo
Tweak XP
no you don't need a new version of cablenut you need to goto options menu of cablenut and choose operating systems.
DefaultReceiveWindow =384000
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 64240
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 64340k
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in Read1st link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall [url]http://www.agnitum.com\[/url] or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates
DefaultReceiveWindow =384000
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 64240
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 64340k
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in Read1st link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall [url]http://www.agnitum.com\[/url] or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates
Comptia a+ n+
Humm, The reg tweak in your first post on the main tweaking forum page says to navigate here for faster web page loading.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider
There isn't any Services after current control set. Not in my XP reg. I found service provider but of course that isn't right. I did it manually, but I searched for the key using find and come up dry. Is there a typo or something in that post? I did everthing else and it did speed up. Well, 2790 and 224. Not the best but it's better. Thanks for the help.
reeo
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider
There isn't any Services after current control set. Not in my XP reg. I found service provider but of course that isn't right. I did it manually, but I searched for the key using find and come up dry. Is there a typo or something in that post? I did everthing else and it did speed up. Well, 2790 and 224. Not the best but it's better. Thanks for the help.
reeo
YOu change thease in this key you are in the right place
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProv ider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class - 1
DnsPriority - 1
HostsPriority - 1
LocalPriority - 1
NetbtPriority - 1
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProv ider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class - 1
DnsPriority - 1
HostsPriority - 1
LocalPriority - 1
NetbtPriority - 1
Comptia a+ n+
mccoffee wrote:YOu change thease in this key you are in the right place
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProv ider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class - 1
DnsPriority - 1
HostsPriority - 1
LocalPriority - 1
NetbtPriority - 1
Yes I know it is on the right. My example shows one of the of numbers at the right of the registry key you listed above. The question is where does the 1 go? Does it replace the first zero the third zero or what? Thanks
reeo
I think Your asking about the windows me comptuer but i might not be sure xp is below this. sorry about any confusion
For 98 & ME they should look like:
01 00 00 00
If you are asking about xp you just delete the old value in there and put in a 1
here is a patch that will make it eaiser if you want to see for your self
http://www.j79zlr.com/reg/FasterPageLoading.reg for 2k/xp
For 98 & ME they should look like:
01 00 00 00
If you are asking about xp you just delete the old value in there and put in a 1
here is a patch that will make it eaiser if you want to see for your self
http://www.j79zlr.com/reg/FasterPageLoading.reg for 2k/xp
Comptia a+ n+