MNOSTEELE52 need you help on my new system

latin · Post by **latin** » Tue May 04, 2004 9:37 pm

this is my new system ==> MOBO=|GIGABYTE K8N PRO TRITON SERIES|
CPU=|A64-bit 3000+ 2.00GHz|
RAID=|0 2x 80gb HDD SATA (maxtor)|
memory=|CMX512-3200C2PRO total= 1GB|
VIDEO=|ATI RADEON 9800 PRO RUNNING ON 9800XT BIOS,VERY STABLE|
what setting would you recomend ?? for cablenut? IM using windows xp PRO AND my internet service is COMCAST. using a 1000 networkcard netgear GA311

TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 117 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

mccoffee · Post by **mccoffee** » Tue May 04, 2004 10:14 pm

Try the following in cablenut

DefaultReceiveWindow =384000
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = leave blank
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = leave blank
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

Co/o manosteele52

. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in Read1st link.

8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

11. Make sure you have ALL of the latest Windows Updates.

latin · Post by **latin** » Tue May 04, 2004 10:50 pm

hum weird im not a noobie when it comes to this but the setttings at tcpipanalizer didnt change

MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 53 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 01011100

Precedence (priority) = 100 (flash override)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 0 (normal reliability)
Cost = 1 (low cost)

thats how it looks now

mccoffee · Post by **mccoffee** » Tue May 04, 2004 11:42 pm

Tcp1323Opts = 1 double check that setting also did you reboot after saving changes

mccoffee · Post by **mccoffee** » Tue May 04, 2004 11:47 pm

Try the following in cablenut

DefaultReceiveWindow =384000
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = 17520
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17520
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

latin · Post by **latin** » Wed May 05, 2004 12:14 am

how about now??

MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 53 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 01011100

Precedence (priority) = 100 (flash override)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 0 (normal reliability)
Cost = 1 (low cost)

mccoffee · Post by **mccoffee** » Wed May 05, 2004 12:26 am

looking good how's the speed ??

latin · Post by **latin** » Wed May 05, 2004 1:34 am

what tha..... the lower the numbers the better speeds?? mccoffe are you sure my settings are right??>

mccoffee · Post by **mccoffee** » Wed May 05, 2004 1:56 am

ok what is your current speeds and where are you testing at

latin · Post by **latin** » Wed May 05, 2004 1:58 am

I havent tested yet but the numbers in the settings you gave me look kinda of wrong. no offense

mccoffee · Post by **mccoffee** » Wed May 05, 2004 2:01 am

Those are windows default windows will adjust the rwin for you if you need and rwin higher then 65535 since the tcpopts123 is set to 1 windows would do that or if you need a lower rwin windows will adjust back for ya.

2k/xp has a self tunning stack so you don't need to hard code the rwin if you are going by the analyzer that is not the best ideal to adjust rwin base off of that different connections may require lower rwin or higher one or something in the middle

http://forums.speedguide.net/showthread.php?t=133280

latin · Post by **latin** » Wed May 05, 2004 2:04 am

ohh alright! makes sense. I just didnt wanna be running at a slower speed

mccoffee · Post by **mccoffee** » Wed May 05, 2004 2:05 am

http://forums.speedguide.net/showthread.php?t=133280 read this link if you get slower speeds i'll adjust the settings

latin · Post by **latin** » Wed May 05, 2004 2:18 am

ok first setttings you gave me worked like a charm for me thanks MCCOFEE