Anyone heard of this tweak???

kconstance · Post by **kconstance** » Sun Nov 25, 2001 11:34 pm

Guys this is just a copy and paste from another forum. Just wondering if it works???

Enter your Network Configuration Control Panel.
Select your NIC which is connected to the Internet.
Make sure you have the QoS Packet Scheduler Protocol Installed.

Start, Run, "gpedit.msc"
Expand Computer Configuration, Administrative Templates, Network
Click on QoS Packet Scheduler
Click on Limit reservable Bandwidth in the right pane.
It should read "Not Configured" which actually means (reserve 20% bandwidth).
Enable it and set the Value to 0%

JamieLee2k · Post by **JamieLee2k** » Mon Nov 26, 2001 12:08 am

only works on Win XP

FinalRender · Post by **FinalRender** » Mon Nov 26, 2001 2:04 am

Whats NIC and hpw would I reach it in win2k?

Carla C · Post by **Carla C** » Mon Nov 26, 2001 7:24 am

Hi guys,

Would this be same as deleting it from networking properties? In other words if I delete the QOS would it be the same as setting it to 0%. Thanks!

Carla

Lee_Nover · Post by **Lee_Nover** » Mon Nov 26, 2001 7:35 am

To Carla, pls read.

http://forums.speedguide.net/showthread ... adid=57379

EvilAjax · Post by **EvilAjax** » Mon Nov 26, 2001 8:17 am

Um... when I had that enabled I didn't notice any slowness.... (compared to the speed while it's disabled)

Carla C · Post by **Carla C** » Mon Nov 26, 2001 8:55 am

Thanks for replying =).

What I wanted to know is should I just remove it completely or just set it to 0%?

Thank you again

Carla

P.S. Hi there Evilajax!!!

EvilAjax · Post by **EvilAjax** » Mon Nov 26, 2001 9:18 am

Originally posted by Carla C
Thanks for replying =).

What I wanted to know is should I just remove it completely or just set it to 0%?

Thank you again

Carla

P.S. Hi there Evilajax!!!

Hey Carla! What's up?

Well, set it to 0% first.. if you don't notice a difference even after rebooting, remove it and see what happens. If your speed increases, keep it like that... if not, just re-check it. Heh.

Carla C · Post by **Carla C** » Mon Nov 26, 2001 9:22 am

Hi Evil!!!!!!!!!!!!!!!!!!!!!!!

I currently don't have it installed but will install again and try the other method

Thanks!!

Carla

amran · Post by **amran** » Mon Nov 26, 2001 11:35 am

hi guys,

I don't seem to be able to find gpedit.msc, me using XP home edition, is that why I can't find them?

Rampage2884 · Post by **Rampage2884** » Wed Nov 28, 2001 4:17 pm

Well, I tried setting it to 0, but I lost alot of speed. I want to try to remove but don't know how.

How do I do it guys?