AC 1200 DB Wi-Fi Dual-Band ?
AC 1200 DB Wi-Fi Dual-Band ?
I have a belkin AC 1200 DB Wi-Fi Dual-Band AC+ Gigabit Router model f9k1123v1. This morning my wi-fi stopped working and I can not access the admin page for my router I keep getting page can not be reached or the 192.168.2.1 page isn’t working.My os is win7 and internet is hughesnet...
Does internet work ? What do the LEDs on the device indicate, is it on/online ? Have you tried restarting the router ?
It is possible sometimes for a router to get reset and change its IP address to the default, however, I believe that is your router's default IP. Fore Belkin routers, you may also want to try: http://router/
I would connect to it via a Cat5 cable, and see what it's IP is. You can achieve that by leaving your PC to obtain IP automatically, but drop to command prompt and type: ipconfig [ENTER]
Look for the "Default Gateway" line, that should be the IP of your router, or whatever device you're connected to.
It is possible sometimes for a router to get reset and change its IP address to the default, however, I believe that is your router's default IP. Fore Belkin routers, you may also want to try: http://router/
I would connect to it via a Cat5 cable, and see what it's IP is. You can achieve that by leaving your PC to obtain IP automatically, but drop to command prompt and type: ipconfig [ENTER]
Look for the "Default Gateway" line, that should be the IP of your router, or whatever device you're connected to.