Can someone help optimize my connect

[Carla C]

Okay here is what I got from the tcp analyzer

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)

bandwidth * delay product:
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 112 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

I think I am going to try cablenut again. What are the settings for faster web page loading for cablenut again? Thanks!

[mccoffee]

click on tcp optimizer in my sig below me download and run click on ppoe on top click on apply then restart I have the same capps as u but i'm not at the house so I don't know the vlues off hand If u are you going to download cablenut look for the addon. The addon has the propper number for your connecton. I will give my settings at house

[mnosteele52]

Use the following settings in CableNut:

DefaultReceiveWindow = 192512
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 64240
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 64240
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

Also do the following:

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link).

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot, anything checked in red is spyware and safe to remove.

As for your other problem with the graphics not loading, make sure you have all the latest Windows updates there were some new ones this week for IE6SP1.

[Carla C]

Thanks will try them =)

[mccoffee]

if she is on ppoe dsl wouldn't she want mtu 1492???

[mnosteele52]

Originally posted by mccoffee
if she is on ppoe dsl wouldn't she want mtu 1492???

Look at her analyzer results above.

[mccoffee]

ADSL PPPOE 1500/256 System spec:
Win XP SP1, P3-700mhz, 384ram, ADSL PPPOE 1500/256 - RWIN = 37440

Maybe i'm on crack

[mnosteele52]

It doesn't matter what her system specs say, maybe she used to have PPPoE or is just mistaken, her TCP/IP Analyzer results show an MTU of 1500.

[mccoffee]

or maybe just maybe santa will give me to women to do at the same time

[mccoffee]

I don't understand dawmn it I'm going to cry hard promblem j/k