Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0
Running Windows xp home sp2
Bellsouth DSL lite 256kbps advertised
ethernet card to westell wirespeed router to wall jack
dunno pppoe dont think so, never have to sign in. always on.
Last Result:
Download Speed: 182 kbps (22.8 KB/sec transfer rate)
Upload Speed: 105 kbps (13.1 KB/sec transfer rate)
my question is, if im supposed to be 256kbps, why is my download rate 22.8 atm, usually 12-15kb/sec websites load fast, but the downloads of files and programs take freaking forever. i was getting better speeds on my 56k modem on downloads.
tryed download accelerator plus, no noticeable difference in speed.
any help appreciated.
um, whats wrong with my speeds?
Try thease in the sg optmizer below me to download and install
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window -63888
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 240
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
VERY IMPORTANT TO DO THE FOLLOWING:
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner.
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4 EXACTLY as mnosteele has explained HERE & Ad-Aware SE 1.06 EXACTLY as mnosteele has explained HERE to remove any spyware then install and update SpywareBlaster 3.4 to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.
7. Make sure you do the faster web page tweak in our Help & Tips page.
8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.
9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.
10. Do a FREE online virus scan from Kaspersky Webscan, make sure to check the option to use the EXTENDED DATABASE.
11. Make sure you have ALL of the latest Windows Updates.
8) ;D
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window -63888
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 240
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
VERY IMPORTANT TO DO THE FOLLOWING:
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner.
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4 EXACTLY as mnosteele has explained HERE & Ad-Aware SE 1.06 EXACTLY as mnosteele has explained HERE to remove any spyware then install and update SpywareBlaster 3.4 to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.
7. Make sure you do the faster web page tweak in our Help & Tips page.
8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.
9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.
10. Do a FREE online virus scan from Kaspersky Webscan, make sure to check the option to use the EXTENDED DATABASE.
11. Make sure you have ALL of the latest Windows Updates.
8) ;D
Comptia a+ n+
ok, finaly got back home
after changes
Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405a401010402
MTU = 1484
MTU is somewhat optimized for broadband. If you're not on a PPPoE DSL connection that limits packet size, consider increasing your MTU to 1500 for optimal throughput.
MSS = 1444
Maximum useful data in each packet = 1444, which equals MSS.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
508288 (MSS x 44 * scale factor of 8)
254144 (MSS x 44 * scale factor of 4)
127072 (MSS x 44 * scale factor of 2)
63536 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
now for the stupid part. wife upgraded to dsl ultra while i was at work 1.5Mb will kick in tomorrow. should i change tcp after it ups??
Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405a401010402
MTU = 1484
MTU is somewhat optimized for broadband. If you're not on a PPPoE DSL connection that limits packet size, consider increasing your MTU to 1500 for optimal throughput.
MSS = 1444
Maximum useful data in each packet = 1444, which equals MSS.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
508288 (MSS x 44 * scale factor of 8)
254144 (MSS x 44 * scale factor of 4)
127072 (MSS x 44 * scale factor of 2)
63536 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
now for the stupid part. wife upgraded to dsl ultra while i was at work 1.5Mb will kick in tomorrow. should i change tcp after it ups??
ok, update with 1.5
ok, bellsouth ultradsl 1.5mb adv just kicked in today
3 tests speakeasy
Last Result:
Download Speed: 580 kbps (72.5 KB/sec transfer rate)
Upload Speed: 207 kbps (25.9 KB/sec transfer rate
Last Result:
Download Speed: 333 kbps (41.6 KB/sec transfer rate)
Upload Speed: 195 kbps (24.4 KB/sec transfer rate)
Last Result:
Download Speed: 495 kbps (61.9 KB/sec transfer rate)
Upload Speed: 202 kbps (25.3 KB/sec transfer rate)
all withing 3 min of each other
Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405a401010402
MTU = 1484
MTU is somewhat optimized for broadband. If you're not on a PPPoE DSL connection that limits packet size, consider increasing your MTU to 1500 for optimal throughput.
MSS = 1444
Maximum useful data in each packet = 1444, which equals MSS.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
508288 (MSS x 44 * scale factor of 8)
254144 (MSS x 44 * scale factor of 4)
127072 (MSS x 44 * scale factor of 2)
63536 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
anything i can do to get more?? and that is not very close to 1.5mb up.
3 tests speakeasy
Last Result:
Download Speed: 580 kbps (72.5 KB/sec transfer rate)
Upload Speed: 207 kbps (25.9 KB/sec transfer rate
Last Result:
Download Speed: 333 kbps (41.6 KB/sec transfer rate)
Upload Speed: 195 kbps (24.4 KB/sec transfer rate)
Last Result:
Download Speed: 495 kbps (61.9 KB/sec transfer rate)
Upload Speed: 202 kbps (25.3 KB/sec transfer rate)
all withing 3 min of each other
Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8) Gecko/20051111 Firefox/1.5
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405a401010402
MTU = 1484
MTU is somewhat optimized for broadband. If you're not on a PPPoE DSL connection that limits packet size, consider increasing your MTU to 1500 for optimal throughput.
MSS = 1444
Maximum useful data in each packet = 1444, which equals MSS.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
508288 (MSS x 44 * scale factor of 8)
254144 (MSS x 44 * scale factor of 4)
127072 (MSS x 44 * scale factor of 2)
63536 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
anything i can do to get more?? and that is not very close to 1.5mb up.
With bellsouth you can use 1454 that's what they recomend. The mtu usually for pppoe is 1480 in xp ,or 1492. I have seen where the 1492 works better with the 1454 as well as the other two values.
since is his 1484 alread usually that is when xp is trying to limit the mtu to 1480 when using the optimizer set to 1500 the mtu in the registry will match the modem of 1492 not all the time though usually.
since is his 1484 alread usually that is when xp is trying to limit the mtu to 1480 when using the optimizer set to 1500 the mtu in the registry will match the modem of 1492 not all the time though usually.
Comptia a+ n+