Removing heatsink
Removing heatsink
How do I remove a glued on heatsink connected to my Nvidia MX Card???
- YARDofSTUF
- Posts: 70006
- Joined: Sat Nov 11, 2000 12:00 am
- Location: USA
Re: Removing heatsink
i need to know tooOriginally posted by Easto
How do I remove a glued on heatsink connected to my Nvidia MX Card???
i read somewhere to put it in the freezer for half hour and gently pry it off with a screwdriver
Will Work For FSB
- HongKongPolice
- Senior Member
- Posts: 2147
- Joined: Thu Jul 08, 1999 12:00 am
- Location: I...... AM.......... CANADIAN!!!!!!!!!!!!!!!!!!!
Heres what you do:
Take and old AOL CD or some other CD you don't need, and a relatively sharp knife. Place knife between heatsink and chip, with the CD supporting the knife, so the knife won't damage the chip, then just pry with the knife, and the HS should pop off.
Take and old AOL CD or some other CD you don't need, and a relatively sharp knife. Place knife between heatsink and chip, with the CD supporting the knife, so the knife won't damage the chip, then just pry with the knife, and the HS should pop off.
Abit KR7A-Raid
Palomino 1.4Ghz @ 1.57Ghz @ default voltage /w DTek Spir@l block 512MB Crucial DDR @ 300Mhz CAS222 ATi OEM Radeon8500 @ 295/275 vmem=3.5v, would of gotten GF3 if they had better filters..... 3Com 905 TX SoundBlaster Live OEM 120gig Western Digital Special Edition (8MB Cache) 20gig Fujitsu 5400rpm (gonna get another WD1200JB for Raid0 soon) LiteOn 24x burner Enermax 350watt PSU (voltage modded) Dell P1110 21" Sony FD Trinitron tube @ 1792x1344 85Hz
Palomino 1.4Ghz @ 1.57Ghz @ default voltage /w DTek Spir@l block 512MB Crucial DDR @ 300Mhz CAS222 ATi OEM Radeon8500 @ 295/275 vmem=3.5v, would of gotten GF3 if they had better filters..... 3Com 905 TX SoundBlaster Live OEM 120gig Western Digital Special Edition (8MB Cache) 20gig Fujitsu 5400rpm (gonna get another WD1200JB for Raid0 soon) LiteOn 24x burner Enermax 350watt PSU (voltage modded) Dell P1110 21" Sony FD Trinitron tube @ 1792x1344 85Hz
- HongKongPolice
- Senior Member
- Posts: 2147
- Joined: Thu Jul 08, 1999 12:00 am
- Location: I...... AM.......... CANADIAN!!!!!!!!!!!!!!!!!!!
Be warned tho, removing the HS voids your warrenty, but who cares, i've fuked around with my VD3 a million times, i even dropped it a few times, LOL and it still works 
Abit KR7A-Raid
Palomino 1.4Ghz @ 1.57Ghz @ default voltage /w DTek Spir@l block 512MB Crucial DDR @ 300Mhz CAS222 ATi OEM Radeon8500 @ 295/275 vmem=3.5v, would of gotten GF3 if they had better filters..... 3Com 905 TX SoundBlaster Live OEM 120gig Western Digital Special Edition (8MB Cache) 20gig Fujitsu 5400rpm (gonna get another WD1200JB for Raid0 soon) LiteOn 24x burner Enermax 350watt PSU (voltage modded) Dell P1110 21" Sony FD Trinitron tube @ 1792x1344 85Hz
Palomino 1.4Ghz @ 1.57Ghz @ default voltage /w DTek Spir@l block 512MB Crucial DDR @ 300Mhz CAS222 ATi OEM Radeon8500 @ 295/275 vmem=3.5v, would of gotten GF3 if they had better filters..... 3Com 905 TX SoundBlaster Live OEM 120gig Western Digital Special Edition (8MB Cache) 20gig Fujitsu 5400rpm (gonna get another WD1200JB for Raid0 soon) LiteOn 24x burner Enermax 350watt PSU (voltage modded) Dell P1110 21" Sony FD Trinitron tube @ 1792x1344 85Hz