SG Broadband Community

Ploxhoi

I want to setup a Socks5 or Socks4 proxy.

_____ _____ ______ _____ _______
|Users|----|router|----|servers|----|router|----|internet|
| ______ |
-------|firewall|--------

Basically I want to setup the socks proxy to bypass the firewall for certian applications.

I want only our users on our ...

Ploxhoi

I got it!

IP/Mask it was as easy as I thought.

(IP+(255-[Mask..255]).(IP+(255-[Mask..255]).(IP+(255-[Mask..255]).(IP+(255-[Mask..255))

If that makes since to yah.

Ploxhoi

I am trying to setup an Socks Proxy.
I want to not be able go to certian IPs.

For example: 100.100.100.0 to 150.150.150.255

I have to do this as a IP/Submask.

Would I be right to put in 100.100.100.0/205.205.205.0?

If I put in 0.0.0.0/0.0.0.0 does that mean any IP?

Ploxhoi

What kind of ISP is that?

You got to be joking, 510 MB?

My ISP lets me get 20 GB, then charge extra per GB.

Ploxhoi

Well, I gave it a shot.

I do have 2 different 3Com Nic drivers (Packet Scheduler Miniport by Microsoft & the other was the normal 3Com driver) in my device manager, but both are required to keep my connection working. I had to keep Direct Parallel installed too.

I did have a bunch of unnessary ...

Ploxhoi

Are you sure it is you or something you did?

I can see your ISP adding security.

Maybe a reflexsive access list or something of the sort.

Ploxhoi

Manually assigning IRQs to PCI slots in the system BIOS as a troubleshooting method may work on some non-ACPI systems that use a standard PC hardware abstraction layer (HAL), but these settings are ignored by Plug and Play in Windows if ACPI support is enabled.

If you need to manually assign IRQ ...

Ploxhoi

Originally posted by Vic Mackey
half will prevent collisions.

I don't think so. When on half mode your connection can not send and recieve at same time. That is why collisions occur. In full mode you can send and recieve at same time.

Ploxhoi

For a simple test swap cables and see if it makes a difference. You would be surprised how a cable can cause problems, but yet seems to be okay.

Ploxhoi

You can not change IRQ settings in WinXP. Who cares if they are shared? I do not believe it really is going reduce performance.

Ploxhoi

Not a whole lot of setting to change.

Link Speed/Duplex Mode = 10 Half Mode
Buffer Receive Size = 64K bytes

Does our modem work at 10 Full or 100 Full?

Full duplex will improve throughtput and reduce errors. It prevents packet colisions when NIC is trying to send and recieve at the same time ...

Ploxhoi

You'll either need to find a mod guide for your equipment or experiment. It usually means, a voltage mod or changing RF transistors with ones with a little more gain.

This is something you really do not want to mess with if you don't know what you are doing. With circuit mount technology modding ...

Ploxhoi

Distance depends on antenna and power transmitted of both transmitter and reciever. Not all cards and access points are not all the same.

Cheap cards and access points tend to transmit with less power, there for less distance. With wireless, you tend to get what you pay for.

Look closely at ...

Ploxhoi

You may want to get some software to compress the images too.
MSPaint will save them as bulky .BMPs.
You'll want to convert them to .JPGs.

Ploxhoi

I just checked my Processes and Applications lists in my Task Manager. It is not running on my computer. Just make sure it does not load on startup and you will be fine.

Ploxhoi

Okay, I installed it.

I chose not to load during startup during the install. Never slowed my computer one bit.

I did find 2 secrurity holes I thought were patched.

Ploxhoi

Originally posted by Lionheart
Service pack 1 is bad news. Do not install it just yet! If you want Virtual Machine get it off KaZaa.

Hello!!!

Why download MSVM from Kazaa when you can get it from Microsoft?

http://www.microsoft.com/java/download/dl_sdk40vm.htm0

Kazaa is bad news.

Get Kazaa ...

Ploxhoi

http://www.icrontic.com/modules.php?op= ... load&cid=1

Well they have both Cacheman and Partition Magic for download.

Good news and review site too.

Ploxhoi

I have been using ZA for well over a year. Both versions 2 and 3. Never had any trouble.

Ploxhoi

Tweaktown has a pretty good guide on tweaking XP.

There is a section that tells you what processes you are most like not going to be using. Word for the wise though, read about them. You might want something to remain on, even though they say you do not need it.

http://www.tweaktown.com/document ...

Ploxhoi

Originally posted by kanenas .

http://www.pagehosting.co.uk/rf/
You can get RefreshForce here. It sets permanently the monitor's refresh rates.

Thanks for the RefreshForce link kanenas!

Been looking for a good one, and it worked great.

Ploxhoi

Keep this.

1. Client for Microsoft Networks
3. Dial-Up Adapter
6. SMC EZ Card 10/100 PCI (SMC1211 Series)
9. PPP over Ethernet Miniport -> PPP over Ethernet Protocol
10. PPP over Etherent Protocol -> SMC EZ Card 10/100 PCI
(SMC1211 Series)
13. TCP/IP -> SMC EZ Card 10/100 PCI (SMC1211 Series ...

Ploxhoi

Here yah go, straight from the cat's mouth.

http://www.microsoft.com/java/download/dl_sdk40vm.htm

Ploxhoi

This may also fall into a similar catagory as Encrytion, except backwards. I know 3Com sells cards with the 3DES on the fly encrypt/decrypt chip. Who cares about CPU ussage if the codec is on the card.

Ploxhoi

Even a GeForce Ti4200, they are in the low $100 range.
I am planning to get one, my TnT2 is keeping up, but only barely.

I think the new games like the new Unreal 2003 will be real hell on it.

Ploxhoi

LOL

Yes you will get the same IP.
It gives you an IP based on you cards Mac Address.
So yes, you will always have that IP.

Ploxhoi

2002-09-22 02:59:13 EST: 10760 / 16172
Your download speed : 10760636 bps, or 10760 kbps.
A 1313.5 KB/sec transfer rate.
Your upload speed : 16172506 bps, or 16172 kbps.

Ploxhoi

I have the same problem, but with XP Pro.

I either get that my Default Recieve Window is either 1456 or 1460 and not scaled when I change it. I beleive if I set it above 256960 it will say it is 1456 otherwise it says 1460 unscaled.

Here is what I got from the test Lobo mentioned.

WEB100 Kernel ...

Ploxhoi

I have never tested this myself, but 2 technicians I work with say when you convert from FAT32 to NTFS it messes up the cluster size or something. I remember them talking about it one day. The conversation was about formating a partition to NTFS or convertiong FAT32 to NTFS. They said it will slow ...

Ploxhoi

I got a few questions.

Did you convert FAT32 to NTFS or did you format the drive with NTFS and install?

Where are the partitions? NTFS on the inside and FAT32 on the outside?

Have you benched you hard drive / partitions, with a utility program such as HDTach?

Ploxhoi

You may try some of the programs AnalogX offers.

http://www.analogx.com

Ploxhoi

Grab it here.

http://www.microsoft.com/windowsxp/pro/ ... ertoys.asp

Ploxhoi

So did you notice a difference Ash?

I don't really want to goto the trouble if it doesn't work or if it messes up my reg.

Ploxhoi

Yah I got the same thing.

Ploxhoi

Oh, I am not complianing about speed.
Only other people I share network with.
We are limited to 10 Mbs with 6000-8000 people sharing it.

I got my Reg hacked and fully optimized, to my knowledge.
Always looking for other hacks.

It would be nice to see a new post with all known .ini .bat and .reg ...

Ploxhoi

My POS computer has me locked in at 384 MB.

Intel 1.2G Tualatin Celeron
Intel 440BX Mobo
384MB SDRAM
NVidia TNT2 32MB
SBLive! Value
3Com 3C905B-TX

Not bad for a computer I bought about 3 years ago and have put only $200 or so in to it.

I need to build a new, but I am a poor college student.

Ploxhoi

2002-04-04 13:30:03 EST: 399 / 1474
Your download speed : 399010 bps, or 399 kbps.
Browsers would show : about a 48.7 KB/sec transfer rate.
Your upload speed : 1474201 bps, or 1474 kbps

Notice I have great upload speed?
This is on a cheap University network running at full capacity, and I mean it ...

Ploxhoi

What if you added this?

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP]
"DefaultTOS"=dword:00101000

SG Broadband Community

Search found 38 matches

Socks5 setup

IP/Submask

Re: SP 1

Good to be tweaked.

Power Tools for Windows XP