SG Broadband Community

i'm not using any VPN software. not that I know of. might try the raspppoe software later.

thanks mccoffee. I was told you are well verse in this area.

my modem is a aztech adsl modem.
my router is a 3com office connect ( wifi )

I can give you the make when i go there tomorrow. Because I"m behind a router. I'm guessing it's the router's firmware that sets the MTU. RIght? then the ...

this are the results I get when there's a low peak in my isp's network

TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If ...

but yesterday when you gave me the Cable nut settings. THe new MTU was reflected to the settings we made.

should I try cablenut? and how do I get in touch with mccoffee.

thanks

rwin reflects to the new setting. However MTU is still 1412 even though I set 1500 using TCPOptimizer


TCP options string = 0204055c01010402
MTU = 1412
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be ...

http://nitro.ucsc.edu/ mode details

WEB100 Kernel Variables:
Client: localhost/127.0.0.1
AckPktsIn: 251
AckPktsOut: 0
BytesRetrans: 82320
CongAvoid: 44
CongestionOverCount: 0
CongestionSignals: 4
CountRTT: 128
CurCwnd: 8232
CurMSS: 1372
CurRTO: 610
CurRwinRcvd: 142848
CurRwinSent: 16304 ...

http://nitro.ucsc.edu/ statustics

WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 176.13Kb/s
running 10s inbound test (server to client) . . . . . . 138.49kb/s

------ Client System Details ...

I've move my wifi ap/router away from the soma networks wireless modem. It made a huge differences. Thanks!! The tweaks also help alittle I think.

Hi,

This is my friend's network I want to tweak.

1. adsl, ppoe

2. my isp is Tm.net.my , 512 kilo bits

3.

MTU = 1412
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of ...

thanks will check it out...

oh btw. How's the situation in bangkok? I heard there was a demostration rally. Better be on guard for riots.

I apply the cablenut settings.
now the rwin does reflect the new settings. Thanks. However my bandwidth is still the same at abotu 290kbps. Is there anymore we can do for my pc. Thanks :)



TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not ...

hi trogers thanks again!

here's the result. The Rwin still doesn't reflect to the settings in the TCPOptimizers current settings screen.



TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal ...

This is the result after I alter based on your settings via TCPoptimizer.
Strange thing is the MTU and RWin doesn't reflect the setting I changed.


TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal ...

more detail result from http://nitro.ucsc.edu/

WEB100 Kernel Variables:
Client: localhost/127.0.0.1

Checking for mismatch on uplink
(speed > 50 [0>50], (xmitspeed < 5) [0.07<5]
(rwintime > .9) [0>.9], (loss < .01) [0.02<.01]
Checking for excessive errors condition
(loss/sec > .15) [0.00>.15 ...

statistic result from http://nitro.ucsc.edu/

WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 76.95Kb/s
running 10s inbound test (server to client) . . . . . . 36.94kb/s

------ Client System ...

Hello,

Thank god for a site like This. I'm getting only like 270 kbps instead of the advertise 1 Mbps. The MTU and RWIN on tcpanalyser doesn't reflect the new MTU I set through TCPoptimizer.

1. What type of connection do you have? I'm using a 1 Mbps wireless broadband in malaysia as advertised ...