SG Broadband Community

houler

Problem solved:

I had to change a policy on the computer that was sharing the printer

secpol.msc>>Local policies>>User Rights Assignment>>Access this computer from the network

then I added the domain group that I wanted to access the printer.

houler

I'd roll back the permissions to domain users....even go back to "Everyone".
Is the workstation correctly logging into the domain? Not a local login?

Ideally though...I'd get this printer networked on IP printing....grab it from the server..and share it from the server, have the server do its job ...

houler

here's a rundown:

I have 8 winxp pro sp2 computers connected to a win2k3 domain with about 50 users in active directory.

1 computer has 1 printer and I want to share this printer throughout the domain so about 20 domain users can print off of this shared printer.

I'm on the computer that has ...

houler

yep, that solved the problem, thanks

houler

I switched it with a cd-rom drive and it works now :) . I'll check the mfg website right now to see if there is a bios update for the drive and re-install it again.

I could boot up with that cd-rw drive just fine and install windows xp. But Windows XP sp2+nforce chipset drivers = doesn't like the ...

houler

nevermind found out what the problem was. It seems that my cd-rw is incompatible with the chipset drivers. Pre-installation of the chipset drivers, CD-rw was working just fine. Also tried switching the cables and ruled out that the cd-rw was the culprit.

houler

Just received a replacement from an NF7-M to an NFS-S because of this exact problem I am currently having.

I flashed to the latest BIOS for revision 2 (that's the rev number i have).

I reformatted my hard drive then re-installed windows xp.

I upgraded to SP2 with the CD.

I downloaded the newest ...

houler

It's the GARLIC SAUCE!, without it, I wouldn't even go to papa johns

houler

started at 1:22pm still going at 3:55pm

, it passed the results I got from the previous "blend" stress test.

edit* 4:37pm
edit* 6:00pm
edit* 7:14pm
edit* 8:00pm
edit* 10:00pm and still going

How long until it's considered stable?

houler

YARDofSTUF wrote:run what failed before, if it faild at 1.6 and on and does so at 1.7, i would say its gonna fail no matter what at that OC.

I'm nervous...heh

houler

I haven't ignored it. I apologize for not updating here frequently and leaving out some details. I did do the voltage little by little. first 1.6 then 1.62, then 1.65 were all run when i was running folding at home, which crashed after a couple of hours. Then 1.675 for prime95 "blend" test. Failed a ...

houler

UPDATE: ran prime95 for 10 hours, and 34 minutes with -0 errors, 0 warnings

with the "Small FFTs" test

houler

Unknown CPU Typ
CPU speed: 2405.03 MHz
CPU features: RDTSC, CMOV, PREFETCH, MMX, SSE
L1 cache size: 64 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 32
L2 TLBS: 256
Prime95 version 23.8, RdtscTiming=1
Best time for 384K FFT length: 28.076 ms.
Best time ...

houler

Slow computer.

houler

what test should I choose? I'm doing the "blend" right now.

houler

ok i'll try that.

houler

Taken from CPU-Z latest version:

CPU(s)
Number of CPUs 1

Name AMD Athlon XP-M
Code Name Barton
Specification Unknown CPU Typ
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Package Socket A
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended ...

houler

arrgh

...ok thanks for the info

houler

Mark wrote:oh i guess i need to read the whole thread then

from what i have read you are better off running the memory and cpu in sync.

and how would I go about doing that?

houler

when should I ever up the chipset voltage?

when should I ever up the AGP voltage?

houler

Mark wrote:what voltage are you feeding the memory ?

2.7V - mobo stock voltage

houler

Yesterday night, I ran the External clock at 200Mhz and the multiplier at 12 giving me 2400Mhz.

vcore was at 1.6v

I ran folding@home to burn it in.

I let it run 12 Hours straight and it was at 51degrees celsius (a bit warm, will reapply HS compound). Folding@home crashed gave me a memory error ...

houler

so is the 200Mhz for the extern. clock ok? sounds like a huge overclock...

edit:

but like when I go over 200Mhz (external clock) to like 201-205. the memory frequency changes (overclocks) to like 267+

and when i change the external clock over 133Mhz - 200Mhz. The memory frequency doesn't change ...

houler

come to think of it I think I'm underclocking the FSB when it's set to run at 266Mhz FSB

so I should change the ratio to to 6:3. The external clock should be on 266Mhz then multipliy that by 6 then divide by 3 = 133*2 = 266Mhz (133*2)for ram

then the multiplier should be at 9 = giving my CPU ...

houler

Ya, different motherboards have different settings, I didnt know you had anything closer to the 133 spec, 6:4 would work great.

your running at 100, 133 or what right now? Your not just gonna jump straight to 200 mhz are you? not a good idea unless your chip is a 200mhz fsb chip.

Ram is at ...

houler

Thanks for your reply.

Would it be better to run the ratio at 6:4 and the external clock at 200 to make the ram run closer to spec?

200 divide by 6 = 33.333 then 33.33*4 = 133.33 and doubled that is 133*2 = 266.7Mhz (266Mhz (133*2) = pc2100)?

and another thing:

I've been trying to burn-in my ...

houler

Can you explain the Dram ratio a little more?

In a Soft menu III option (abit mobo): what should the external clock be set to initially if I want the CPU to be at 200Mhz, and the Ram to be 266Mhz (133*2), before setting up the Dram Ratio to 5:3?

How would you get 200Mhz for the CPU, and 266Mhz ...

houler

Good read and thanks for the info! That really filled in alot of gaps I was having.

houler

I want to reach it at 2400Mhz stable.

What should the voltage be (vcore)?

houler

will the external clock affect the CPU or the Memory more?

I'm using a thermaltake silent boost HSF.

right now the external clock is set to 133MHz instead of the 200.

what should the FSB/memory ratio be equal to with my current specs?

houler

My system specs are in my sig. Will increasing the "external clock" to 200Mhz in bios affect my memory? or is the FSB independant from memory now?

Do you think it will run stable?

houler

ok thanks! yep I had to start from Dimm 3 to Dimm1 to make it work

Now it says Dual channel enabled when I post.

now about that synchronous mode...

houler

How do i know if my 2x512MB PC2100 Crucial chips are running in dual channel mode?

how do I run my memory in "synchronous" mode?

thanks in advance.

houler

:nope:

didnt know you could

Unscrew your mx500 mouse then open it up. On the top face of the mouse's inside cover there is a small copper/metal block (i guess it's to give it weight or something?). Unscrew and remove it. Screw the face of the mouse back. Now you have a slightly lighter mouse ...

houler

Cool looking mouse

Did you "hack" up your mx500 mouse to make it slightly lighter than stock?

houler

ok thanks for the info

houler

I just purchased an ABIT NF7-M motherboard w/ a 2600+ mobile CPU.

I have 2 PC2100 512MB Crucial sticks. But they are different models:

(just purchased) one stick is a DDRAM 512MB|64X64 PC-2100 8T CRU%

and the other stick is (bought about 6 months ago) DDRAM 512MB|64X64 PC-2100 16T CRU%

Is that ...

SG Broadband Community

Search found 37 matches

share local printer to 20 users in a domain

problems installing NF7-S mobo drivers

RE: i love papa johns pizza

Overclocking with 2600+ mobile and NF7-M/NF7-S mobo

NF7-M/NF7-S stability question

NF7-M/NF7-S dual channel and synchronous mode?

Dual Channel?