Voodoo 3dfx

Duzmor · Post by **Duzmor** » Sun Jun 23, 2002 6:56 am

I have a Voodoo 3dfx Card that came out of Compaq Computer- and could never Fig. Out what Card It Is - Here is What is on It

1999 3dfx Interactive

On A chip Say's V3 1000 - 2.15.05

On the Big Chip it says - 3dfx -355-0025-001
F11853.10
9938 20005
Taiwan 3301

N2544

Does anyone Know what Voodoo card this is ??

Pluse Where I can get Some Good Drivers for It - for win 98se

Thanks

Duzmor

Duz !!

Bruce

A_old · Post by **A_old** » Sun Jun 23, 2002 7:01 am

"On A chip Say's V3 1000"

Voodoo3 1000, it was an OEM version of the voodoo3, never seen it except in compaqs.. it's a decent lil card, some had 8MB memory, some had 16MB.

Amro

Duzmor · Post by **Duzmor** » Sun Jun 23, 2002 7:09 am

Originally posted by Amro
"On A chip Say's V3 1000"

Voodoo3 1000, it was an OEM version of the voodoo3, never seen it except in compaqs.. it's a decent lil card, some had 8MB memory, some had 16MB.

Amro

Thanks Amro- Yes the Little Chip has a sticker on it That Says V3- 1000 - Do you Know Were I can get Some Win 98se Drivers For It - I am going to Put In My Kids Computer Today

Duzmor

Duz !!

Jon · Post by **Jon** » Sun Jun 23, 2002 7:29 am

http://www.voodoofiles.com/3dfxhelp.asp

should have the drivers you need.

Duzmor · Post by **Duzmor** » Sun Jun 23, 2002 7:52 am

Originally posted by Jon
http://www.voodoofiles.com/3dfxhelp.asp

should have the drivers you need.

Thanks Jon: I have Been There and Can't find the Drivers !!!

Duzmor

Duz !!

A_old · Post by **A_old** » Sun Jun 23, 2002 7:54 am

you should be able to use v3 2000 drivers..

YARDofSTUF · Post by **YARDofSTUF** » Sun Jun 23, 2002 8:01 am

if its the 16meg version teh voodoo 3 2000 drivers will do perfect AND u can flash the card the voodoo 3 2000 bios and get it up to speed, doesnt the voodoo3 1000 run at only 120mhz?

YARDofSTUF · Post by **YARDofSTUF** » Sun Jun 23, 2002 8:08 am

here we go:

Compaq Voodoo3 1000 AGP

Info about the Compaq Voodoo3 1000 AGP:

Compaq has an OEM version of the Voodoo3, which has an 125Mhz core & memory speed. It is an AGP board and has either 8MB or 16MB ram and is not supported by 3dfx. Support and drivers for this board are provided by Compaq. The normal Voodoo3 2000/3000 drivers should work fine though.
This card was sometimes called Velocity and was clocked at 143MHz.

http://www.xs4all.nl/~jfeelder/voodoous ... v3oem.html

Duzmor · Post by **Duzmor** » Sun Jun 23, 2002 8:33 am

Thanks for all the Help - I found the Drivers for The Voodoo 3 - I am useing Voodoo 3 2000 Drivers for the Card !!!

Thanks Again - You Guys have been a Great Help

The Voodoo 3 card Is Installed and working Great !!!

Thanks Again

Bruce

Duzmor

Duz !!!