The Broadband Guide
SG
search advanced

Amped Wireless TAP-R2

details: High Power Touch Screen AC750 Wi-Fi Router
hardware type: Wireless Router
date added: 2014-12-30
updated: 2015-01-04
With its high power components, the TAP-R2 can send a Wi-Fi signal to areas like upstairs rooms, out to the yard, or to the far office.

With a total of six high power amplifiers and two high gain antennas (external and internal), the TAP-R2 delivers up to 800mW of Wi-Fi output power. More output power means more Wi-Fi range as it allows a signal to push through walls and eliminate Wi-Fi dead spots. By fine tuning this advanced, high power technology, the TAP-R2 can supply up to 3X the speed and coverage of other Routers and all in a few minutes time.

After powering on the Router, the user taps to begin the easy to follow Setup Wizard. The TAP-R2 automatically detects your Internet settings, you give your Wi-Fi networks names and passwords, and setup is complete.
 
 
 
 TAP-R2 Features
 General
 Availability: currently available
 List price: $159
 Warranty: 1 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 2
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for storage devices
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 750 Mbps (Wi-Fi 5)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
 external antenna(s): 1
 Antenna connector: RP-SMA (Reverse SMA)
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: http://192.168.1.240
 Alternate Admin URL: http://setup.ampedwireless.com
 Administration: Web-based (LAN)
 Firmware upgradeable: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 IPv6 support: yes
 Links
 Product page: http://www.ampedwireless.com/products/ta...
 Datasheet: http://www.ampedwireless.com/datasheets/...
 Manual: http://www.ampedwireless.com/docs/usersg...
 Quick Install Guide: http://www.ampedwireless.com/docs/setupg...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About