im an NEWBEE plz tweak me ^^

LebronJeff · Post by **LebronJeff** » Fri Jul 06, 2007 12:44 am

« SpeedGuide.net TCP Analyzer Results »
Tested on: 07.05.2007 05:56
IP address: 203.111.xxx.xx

TCP options string: 020405b4
MSS: 1460
MTU: 1500
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 65535
Reccomended RWINs: 64240, 128480, 256960, 513920
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 108
Timestamps: OFF
SACKs: OFF
IP ToS: 00000000 (0)

i am limit by my service provider by 384 kbps,i have a router 2 computers connected i want to boost my connection than him ^^

trogers · Post by **trogers** » Fri Jul 06, 2007 2:41 am

I am paying for and is limited to 1000 kbps. Is there someone here who can help me get 2000 kbps without me paying my ISP for the higher speed? Hahaha...

Which country are you in?

LebronJeff · Post by **LebronJeff** » Fri Jul 06, 2007 3:20 am

im from philippines dude can you give me the best tweak beacause i love watching youtube,many acclererator for youtube like speedbit but when i install it my connection is lost,-.-

LebronJeff · Post by **LebronJeff** » Fri Jul 06, 2007 3:33 am

is that TCPoptimizer can boost the download speed?or only web browsing?

trogers · Post by **trogers** » Fri Jul 06, 2007 5:12 am

We hope to achieve up to 90% of the speed we pay to get from our ISP when we use TCP Optimizer. This is for browsing and also downloading.

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU 1500
TTL - 64
TCP Receive Window - 26280
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 4
Max Connections per 1.0 Server - 8
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

After reboot, test your speed at this link using the recommended test server:

http://www.speedtest.net/

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 9:17 am

dude how about the cablenut,i read that cablenut can help when tweaking can you give me a settings in cablenut?

trogers · Post by **trogers** » Fri Jul 06, 2007 10:19 am

i89WipeR wrote:dude how about the cablenut,i read that cablenut can help when tweaking can you give me a settings in cablenut?

You can go to this link to calculate the settings for Cablenut:

http://www.j79zlr.com/cablenutXP2k.php

One word of advice: leave the field for DefaultReceiveWindow blank if your OS is XP SP2.

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 10:58 am

in the website you give i have to give the download,upload,latency,but, in the speedtest.net the results are always changing what can you advise?

trogers · Post by **trogers** » Fri Jul 06, 2007 12:14 pm

i89WipeR wrote:in the website you give i have to give the download,upload,latency,but, in the speedtest.net the results are always changing what can you advise?

You use your ISP given speed for download and upload, not the results from speedtests.

For latency, use the highest latency value of the speedtest results at the test server(s) of the country you surf to most frequently.

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 12:22 pm

when i finished your suggestted TCP and the cablenut i can watch youtube fast,WHILE using limewire THANKS DUDE I REALY APPRECIATED youre help,one thing i am not good in english

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 12:25 pm

i dont know what is my UPLOAD SPEED,because my service provider only said the 384 kbps

trogers · Post by **trogers** » Fri Jul 06, 2007 12:34 pm

i89WipeR wrote:i dont know what is my UPLOAD SPEED,because my service provider only said the 384 kbps

Try 128 kbps for upload.

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 12:48 pm

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 12:50 pm

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 12:51 pm

thanks dude ^^

i89WipeR · Post by **i89WipeR** » Fri Jul 06, 2007 1:13 pm

and then when i reboot ^^

trogers · Post by **trogers** » Fri Jul 06, 2007 10:52 pm

i89WipeR wrote:and then when i reboot ^^

Post a new TCP Analyzer report.

i89WipeR · Post by **i89WipeR** » Sat Jul 07, 2007 12:35 am

i think my web brosing is slow a bit but downloading is BLAZING
« SpeedGuide.net TCP Analyzer Results »
Tested on: 07.07.2007 00:32
IP address: 203.111.xxx.xx

TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 32120 (multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 32120
Reccomended RWINs: 64240, 128480, 256960, 513920
BDP limit (200ms): 1285kbps (161KBytes/s)
BDP limit (500ms): 514kbps (64KBytes/s)
MTU Discovery: ON
TTL: 44
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

the TCPwindow are not like the settings in my TCP optimizer maybe bacause of cabblenut?

trogers · Post by **trogers** » Sat Jul 07, 2007 12:45 am

i89WipeR wrote: the TCPwindow are not like the settings in my TCP optimizer maybe bacause of cabblenut?

Yes, you probably used 660ms for latency and the calculator gives TCP Window as 32120.

This latency value is helpful data for tweaking connections in your country.

i89WipeR · Post by **i89WipeR** » Sat Jul 07, 2007 1:07 am

Dude how about in the Maxconnections,the cablenut gives 8,10 but you give me a 4,8 what should i use?

LebronJeff · Post by **LebronJeff** » Sat Jul 07, 2007 1:52 am

Dude how about in the Maxconnections,the cablenut gives 8,10 but you give me a 4,8 what should i use?

trogers · Post by **trogers** » Sat Jul 07, 2007 4:44 am

LebronJeff wrote:Dude how about in the Maxconnections,the cablenut gives 8,10 but you give me a 4,8 what should i use?

You can try 4,4 or 4,8 or 8,8 and 8,10 to see which helps your browser to load fastest. For low broadband speed we use 4,4 and for high speed we use 10,20. So you will have to find the one that serves you best.

LebronJeff · Post by **LebronJeff** » Sat Jul 07, 2007 9:18 am

how about 10,10?

trogers · Post by **trogers** » Sat Jul 07, 2007 10:44 am

LebronJeff wrote:how about 10,10?

I am using 10,10 for my 1024 kbps line.

LebronJeff · Post by **LebronJeff** » Sat Jul 07, 2007 11:01 am

i am confused in cablenut,because to use it you need a download,upload,latency, my service provider only said 384 kbps "INTERNET SPEED? are internet speed and download speed are same??

trogers · Post by **trogers** » Sat Jul 07, 2007 12:15 pm

LebronJeff wrote:i am confused in cablenut,because to use it you need a download,upload,latency, my service provider only said 384 kbps "INTERNET SPEED? are internet speed and download speed are same??

If yours is a cable service, likely speed is 384/384 kbps bothways.

LebronJeff · Post by **LebronJeff** » Sun Jul 08, 2007 1:01 am

what happen if i use 10,20 but my connection is low?

trogers · Post by **trogers** » Sun Jul 08, 2007 1:50 am

LebronJeff wrote:what happen if i use 10,20 but my connection is low?

Then the browser will be trying to load too many things at the same time, thus the web page will form slowly.

Note: this setting only applies to the IE browser.

LebronJeff · Post by **LebronJeff** » Sun Jul 08, 2007 6:02 am

in TCP analyzer i can use 513920,but the tweak you give me 26280,what is the effect if i use 513920?

trogers · Post by **trogers** » Sun Jul 08, 2007 7:13 am

LebronJeff wrote:in TCP analyzer i can use 513920,but the tweak you give me 26280,what is the effect if i use 513920?

TCP Window (RWIN) = Broadband Speed x Latency divided by 8

If you use too high a RWIN, your speed will slow down if your signal suffers packet damage or losses.

RWIN should also be an even multiple of MSS.

26280 = 384 x 547.5 / 8 and is an even multiple of 1460 (1460 x 18).

LebronJeff · Post by **LebronJeff** » Sun Jul 08, 2007 9:33 am

i wondering if cabblenut is realy help me in my connection..hmm what do you think?

trogers · Post by **trogers** » Sun Jul 08, 2007 10:11 am

LebronJeff wrote:i wondering if cabblenut is realy help me in my connection..hmm what do you think?

I first use TCP Optimizer to tweak and then use Cablenut but some values that I have used in TCP Optimizer will be maintained when using Cablenut such as:

TCP Receive Window = GlobalMaxTCPWindowSize and TCPWindowSize
TimetoLive (TTL) = 64
DefaultToSValue = 80

Remember DefaultReceiveWindow has to be blank when your OS is XP SP2 as in this OS, any value entered will override TCP Receive Window.

LebronJeff · Post by **LebronJeff** » Sun Jul 08, 2007 10:11 am

how about in "HOST RESOLUTION PRIORITY" in cablenut their settings is1,2,3,4 and the tweak you give is 1,1,1,1 what do you think?

trogers · Post by **trogers** » Sun Jul 08, 2007 10:20 am

LebronJeff wrote:how about in "HOST RESOLUTION PRIORITY" in cablenut their settings is1,2,3,4 and the tweak you give is 1,1,1,1 what do you think?

The recommended values of TCP Optimizer are 5,6,7,8 and the documentation suggests to maintain Windows' original intention to have them run in that order of priority. Thus Cablenut and TCP Optimizer have the same recommendations (use small whole numbers and in that order).

But I find web loading faster with 1,1,1,1.

LebronJeff · Post by **LebronJeff** » Sun Jul 08, 2007 10:30 am

i think 1,2,3,4 is best for my system.thats cablenut tweaks ^^

LebronJeff · Post by **LebronJeff** » Mon Jul 09, 2007 2:42 am

what do you think in "HOST RESOLUTION PRIORITY" hmm i set this in 1,2,3,4 OR 1,1,1,1?

johnhc · Post by **johnhc** » Mon Jul 09, 2007 3:51 pm

I don't understand the speed test that i89WipeR shows after tweaking. It shows over 6 Mbs with a latency of 639 ms but a RWIN of only 32120. How is this possible?
Thanks.....John

i89WipeR · Post by **i89WipeR** » Mon Jul 09, 2007 6:38 pm

dont confused dude after that i know that something was wrong and then my spees is..
<a href="http://www.speedtest.net"><img src="http://www.speedtest.net/result/152190909.png"></a>

i89WipeR · Post by **i89WipeR** » Mon Jul 09, 2007 6:38 pm

trogers · Post by **trogers** » Mon Jul 09, 2007 10:07 pm

johnhc wrote:I don't understand the speed test that i89WipeR shows after tweaking. It shows over 6 Mbs with a latency of 639 ms but a RWIN of only 32120. How is this possible?
Thanks.....John

This can sometimes happen in speedtest due to caching. The same test file was sent by the test server and if either the web proxy server or the browser already has that file in cache memory, that file will be transferred from cache memory and not from the test server, thus a faster file transfer speed.

SG Broadband Community

im an NEWBEE plz tweak me ^^

im an NEWBEE plz tweak me ^^

^^

question

CableNut

CableNut

Very Amazing Dude

one last question?

One last question pllzzz

dude

Last question

dude

TCP receive window

dude

dude

dude

Dude

Wiper