SG Broadband Community

nagetech

It seems that for some of my clients, no matter how much work I put into their computer, and how hard I try to harden the security on the PC as to keep viruses and spyware out, they always seem to nuke the computers in no time @ all. I just got done fixing a clients PC, and two weeks later the PC is ...

nagetech

Just throwing this out there, if the speeds are so slow only during evening, wouldn't that have something to do with perhaps node saturation?

nagetech

Unfortunately, most routers today assume the end user is a moron, and loads it up with setup wizard after wizard, and enables god knows how many features right out of the box. To this day, my favorite router was the Netgear RT311. Easy to config, and did what I wanted.

If you want to have fun, try ...

nagetech

Yeah, plus you never know how much trouble you could get into for breaking said rules. They are there for a reason.

nagetech

Would you want the new pcs to be able to connect to the other PC's?

Just asking as this makes a difference in my asnwer.

nagetech

If you just setup static ips on the machines, and point each machine to the gateway you want it to use, you should be set.

Go to http://www.whatismyip.com from each machine once you set everything up, and if each return a different IP, you are good!

nagetech

Have you tried unplugging router and modem, letting it sit there, and then plugging everything back in?

Perhaps a hard reset on the router and resetting everything up from scratch?

nagetech

Another solution could be just to do away with DHCP, and Static IP everything, much simpler in my opinion :) .

If you flash the Wrt54G with some third party firmware, you might be able to edit the DHCP scope enough to edit the gateway settings.

If you are on the market for another router, you ...

nagetech

You need to make sure:

1. The router is acutally picking up ISP provided IP Address/subnet/gateway/dns

2. Computers on your network are setup for DHCP, and there are no conflicting addresses.

3. The router itself is setup as an internet DHCP server.

Let me know if any of this helps!

nagetech

Just out of curiosity, if the network admin is running that network, wouldnt it be up to him to find ways to speed things up? I'd assume things you could do would be minimal at best.

nagetech

Is the Wired Ethernet Port (Local Area Network) setup for DHCP?

Had a client with a similar issued, turned out their LAN was Static Ip'ed for some odd reason.

nagetech

Hello Everyone, thanks for looking at my thread. Father and I recently got into some very bad misfortunes, and now I am trying to sell everything I don't need to help make up for everything. Every little bit counts, so please consider my items, and let me know if you have any questions or make me ...

nagetech

If I can find out whether or not it supports FE ports, it can have a lot of spplications!

nagetech

Howdy everyone! I have come into 2 2610 Routers! I am highly interested in learning these bad boys! But first I need some guidance!

First off, each one only has one ethernet port, and was told by some that it would NOT support Fast Ethernet Cards, while others said it could. Could I please have ...

nagetech

I am curious in implementing a proxy server on my network specifically for Instant Messaging purposes (AIM to be exact). There are a few members in my household that insist on talking to certain parties that I am not comfortable with, and after several requests in asking them to stop these ...

nagetech

I have been doing a lot of reading, but find that most people in my position have the luxery of multiple IP address, as I do not. I have not read about any success stories from wsomeone with just one public IP

nagetech

Thanks for your reply!

So you are saying one of those distros WILL distinguish http://www.domain1.com -> server 1 and http://www.domain2.com -> server?

I was looking at those, and based on the screenshots, was not sure if it could be done. Could you perhaps assist me to some sort of guide that ...

nagetech

Hello Everyone, got one for you guys.

Ok, here is the scenario. My room mate and I each have our own servers, with our own domain. Each server has our web server and mail server setup on it. What we need is a software solution that allows us to setup a spare PC as a router. But here's the kicker ...

nagetech

Personally, I'm a zyxel fan. I forgot the exact model number, but its Zyxel's Giga-bit card. Very solid IMHO

nagetech

I am trying so hard to remember this movie, and I am failing miserably. It's not too old, and stars James Wood (I think, might be off on that). He is an alien from a foriegn planet inhabited by men (only men) who have grown so smart that they no longer have penises. Something happens and they need ...

nagetech

My friends and I have started a humble board. Thought I'd come to this site, as I come here for many other things, and share it in hopes of building a community

Thanks in advance for showing interest.

http://glounge.nagetech.com

~~ Ernie

nagetech

Wow, I got a lot of visiters, but no one has registered yet. I wonder what my board is missing...

nagetech

We do have a Casino on the board for entertainment.... Board currency is Gillas.... When you sign up you get 50 gillas ( no paypal stuff sorry

)

Thanks for inquiring

nagetech

I am a Devry University student majoring in Networking. I am quite good at what I do so far, and decided to start using my skills for something practical and at the same time something fun.

I started this site, http://lounge.nagetech.com , as a place for DeVry students to go to, but after awhile I ...

nagetech

Why did you say that?

nagetech

So far so good!

Have a nice member collection going on....

Going to close down the signup soon and making this a give/take type membership...

Got any comments/suggestions?

nagetech

Sting operation??

lol that is cute......be funny if our own government did go as far as doing that.... on a server with the following specs.....

http://info.nagetech.com

Thanks for those of you who have joined so far....if you know anyone that might want to join, give them the address.

nagetech

Thanks for signing up!

As far as the first post....I dont know what to tell you

The site is up and running....maybe something's up with your connection.....

Thanks again!

nagetech

and she needs testing....

Hey everyone....

During the break I came across http://www.kplaylist.net .

Basically this is a script that allows for one to make a nifty looking mp3 directory site.

Being that I had nothing better to do, I decided to start playing with it. I dedicated a server to it ...

nagetech

I'm sure most peole here are familiar with the serices provdided by dyndns.org.

I would like to know, if it's possible, to setup URL forwarding at home...... So I can use my home DNS server, and pull that URL forwarding off....

I'm pretty sure it's not completely possible with DNS (Server 2003 ...

nagetech

They have the BOOL, which is ridiculosly priced, and from what I've read on the dslreport.com forum, lots of BOOL users are experiencing probs.

nagetech

Yes, OOL has finally joined the rest of the ISP world and blocked Port 25. I have looked around the net for a workaround, and have found no-ip.com and dyndns.org provide that mail reflector service. Not bad, but 40 bucks a month. I want to know if there is any other company that provides that ...

nagetech

I want to know if anyone is interested in helping me work on a message board/forum like this one. Well not exactly like this one. I started one with a friend of mine, but we lost interested in that project because of lack of time. But now that I have time, I am willing to work with someone that ...

nagetech

Yes i do...i even type it in manually...no go

nagetech

I dont think I do..I remember a year ago when I had my other win2k webserver running, I didn't have that..just dunno whats so different this time....wonder if i screwed up somewhere along the line...

I hope someone can help

nagetech

Ok, I feel like a moron....

I can't get my ASP to work under my Win2k IIS server...

I have frontpage extensions installed, but for some reaon can't get ASP pages to work..whenever i go to the file using my web browser..i just get "page not found"

ANyone know where I could go that could give me a ...

nagetech

I've been rattling my head over this for awhile........

Can the QSIG protocol be used over the PSTN?

I have a lot of material on QSIG itself, but nothing beefy that could answer that question... :(

I'd appreciate any help....got a 7 page paper almost ready to go...just need to squeeze in that ...

nagetech

Those are all great and all...but I meant I needed something i can setup on my own server...not a service provided by someone else

nagetech

Does anyone here by any chance know of a nice simple easy to use but good looking web blog system I could setup?

I've gone through a few, some worked, and some weren't exactly what I was looking for...

I'm hoping someone here setup their own and can perhaps advice me as to what to use...

Thanks ...

nagetech

I have to do a small paper based on the Q.SIG technology implemented into PBX's....

I've found some sources for the paper, but could use a little nudge in the right direction.

Any help would be apprecaited...

I'm not asking for someoen to do the paper for me or anything, just a little help in the ...

SG Broadband Community

Search found 228 matches

Small rant on Customers and spyware

Gear that needs to go! 2 Ipods + Laptop + Carputer + More! Please Read!

Cisco 2610 Help

IM Proxy Server Question

NAT/Firewall/Proxy software solution

Movie Question!

Gaming Board

The Lounge

Just got my server up!

Setting up Dyndns.org like services at home....

ISP blocked port 25, need workaround

Anyone care to help?

ASP and IIS

QSIG Question?

Web Blog System

Help with paper.....