SG Broadband Community

There are no more available options. What i have been suggested in case of non-availability of Port-Forwarding option in a combo modem is to use it as a bridge thus forwarding all traffic to my pc and use some software to control PPPoE and Firewall.
The reference is here:
http://forum.portforward ...

I got this modem from my ISP. There is no documentation available.
I would like u to visit the page i just created. It contains snaps of the various options my modem provides.
My First Online Page=> http://www.freewebs.com/zapp-u/mymodem.htm <==
I know its going to be a big pain but please do it ...

I don't know much about that. How do you check either of the options: Live IP or Proxy one?
I do know that i have a dynamic IP(given to my modem/router), cause it keeps changing every time i restart my pc. I have given my pc a static IP though.

I would like to about the proxy ip.?
thanks

i know i got to port forward my router but it has no such option!. Thats strange and makes me think it might just be a modem after all. But it shows settings like NAT and FIREWALL which are enabled by default and i can't control them.

1.> here is a snap of WAN Setup Summary:
http://img511 ...

hey cooldude, i want to know if your problem was solved. I am having the same problem with bitcomet. i am not accessible from outside my network.

The thing is that i have tried port forwarding on my router and it is still unaccessible from outside. So i wanted to know what all is happening so i could understand it better. My ports are open, i have proper entries in the windows firewall but still for some reason i am invisible from outside ...

sorry i forgot the image link in my previous post, here it is:



here it is sorted by port and port 21(telnet ) is clearly visible in listening mode which is unavailable from outside.

Well ok if u take it that way, i wont ask now. As i said there are many softwares available, but i wanted to know how all this works!

thanks anyway, I have gained so much.

I agree that the port20/21 are not listening. But i have port23(telnet) and others in listening mode. here =>


and after i observed this, i took the test again and again found that the services could not be contacted from outside!

thanks

No No, u misunderstood me. That was my reply for ErkD.
Anyways what i was asking for was a way to find out what all computers were connected to the other side of a router(of another network). Ya sure there are many softwares available that help u do it, but i want to find a way without using ...

Ya i think i have my ports open. i checked it using currports. here is a snap of it=>
http://img135.imageshack.us/img135/5035/cports1wt2.th.png

After checking for opened ports i tested it using https://www.grc.com/x/ne.dll?bh0bkyd2(shields up!) and here is the result:
http://img137.imageshack.us ...

thanks
I did add port in windows firewall as follows:
1.> port 21 (ftp service)
2.> port 20 (ftp data)
but still i got ports closed.
I saw my modem settings lately and found it had a firewall which was enabled. i am working on a page to show you a detail of my modem as i cant find its maker.

I thought the reason for having a router was to cope with the situation of having more machines than the available IP in IPv4, that is why the new version IPv6 is being developed.
And if we start looking at every thing as illegal (hacking), then there is no point of having this forum, don't u think ...

The website is not http://www.shieldsup.com. it is
==>https://www.grc.com/x/ne.dll?bh0bkyd2.
Sorry for the goof up.

hello friends
I tried the services provided by http://www.shieldsup.com and found that all of my ports are closed. After that i made two entries in the exceptions part of windows firewall
1.> port 21 (ftp service)
2.> port 20 (ftp data)
After this i again tried the service and found that the ftp ...

hi again
i searched about connecting to remote machine and it gets down to this question in my head. Is there a way to know the network structure inside a router. Can i know the nodes connected to the node and their IPs.
Like in the picture ( http://img147.imageshack.us/img147/1989/basicwb2.png ) is ...

Thanks for the response.
hey buddy why would i require a software. Is there no other way to connect to the remote machine. i do not want to share or anything but just want to experiment. i could go as far as his router and i do not know how to ask the router to let me pass to the desired node or to ...

Thanks for the effort
I have posted a thread in the networking section "connect using (which) ip?"
have a look at it.
thnx

hello everyone
I want to be able to connect to my friends pc using just ips in the address bar. i dont want to use softwares. here is the scenario

http://img147.imageshack.us/img147/1989/basicwb2.png
Please take a look at this picture for u to be able to understand better.

I want to connect to ...

ya ok my mistake, it was an example. actually my pc has ip 192.168.2.5 and the other one has 192.168.2.2, getting connection from a wireless router which in turn is feeded by an adsl modem having internal ip 192.168.1.1 .
But what i wanted to know is how to connect directly to one of my machines ...

Alright, but now how do i proceed t o make bitcomet connect to all and dowmload freely. i need to open ports for it to connect. i have put my pc in dmz but now i am reverting back, thanks.

hello again
i need to use port forwarding in order to increase download speed of my software but after reading some material, i am confused between setting up dmz for my pc or creating a virtual server with a range of ports to forward to. which is better
thanks

hello everyone.
my pc is connected to a wireless router which also serves a laptop. the router gets the net connection from an adsl modem. when i try to find my ip using any ip finding service, it shows the ip given to my adsl modem, which is obvious. if i put the ip in my browser address bar, it ...