Networking, Wireless Routers (802.11 a/b/g/n/ac/ax WiFi), NAT, LAN configuration, equipment, cabling, hubs, switches, and general network discussion
neo960
Advanced Member
Posts: 612 Joined: Sun Nov 03, 2002 9:02 pm
Post
by neo960 » Mon Jul 02, 2012 1:03 pm
I mainly use a desktop PC with wired networking only, and occasionally would like to use my android phone or laptop using wifi connection.
So I would like to be able to keep the wi-fi turned off while the wired networking is turned on most of the time.
Can YOSC or anyone here recommend a good router?
YeOldeStonecat
SG VIP
Posts: 51171 Joined: Mon Jan 15, 2001 12:00 pm
Location: Somewhere along the shoreline in New England
Post
by YeOldeStonecat » Mon Jul 02, 2012 2:58 pm
Cisco e4200
If on a budget, you can find factory refurb'd e3000 models at newegg....it's the predecessor model...very strong performer. I run one at home with Tomato firmware.
MORNING WOOD Lumber Company
Guinness for Strength!!!
neo960
Advanced Member
Posts: 612 Joined: Sun Nov 03, 2002 9:02 pm
Post
by neo960 » Mon Jul 02, 2012 11:21 pm
Thanks YOSC. I am looking at the 3200 refurbished at around $55. Will these work OK without having to change the firmware to tomato?
Will I be able to switch the wifi access on/off without affecting the wired connections with the default cisco firmware?
YeOldeStonecat
SG VIP
Posts: 51171 Joined: Mon Jan 15, 2001 12:00 pm
Location: Somewhere along the shoreline in New England
Post
by YeOldeStonecat » Tue Jul 03, 2012 5:43 am
I recall the stock firmware having a disabled switch on the radio.
MORNING WOOD Lumber Company
Guinness for Strength!!!