Access point or Bridge?

Networking, Wireless Routers (802.11 a/b/g/n/ac/ax WiFi), NAT, LAN configuration, equipment, cabling, hubs, switches, and general network discussion
Post Reply
Concerned Cajun

Access point or Bridge?

Post by Concerned Cajun »

Hello I have a question regarding settting up a wireless network

I currently have a DLINK DIR-625 WLAN Router hook to my cox cable modem.
That router is in another room

Now I have a 2 PCS,PS3 in another room downstairs
I don't want to run any wires from up stairs to downstairs.
As for the Pcs currently they don't have any wlan devices.
I want all them to access the internet using a central unit such as another wireless router and use short cables since they are very close to each other.

I'm confused about if I should use a bridge or access point.
I read about an access point,but to me it sounds like I still have to run a cable from the access point to the main router. Is this correct?
Also can any router be turned into an access point even though it isn't mention?
I've read about the bridge mode,but unsure if that is exactly what I need.

I'm very confused with networking,it's like being a blind octopus trying to wrap presents.
One more question,can anyone recommend a good site or book to learn networking? :o
User avatar
morbidpete
Posts: 7283
Joined: Sat Mar 30, 2002 12:00 pm
Location: W. Warwick RI

Post by morbidpete »

The PS3 has built in wireless. So thats one down

You need a wireless bridge for the other pc's. The router is already an access point so no need to mess with that.
YoshiMon
Member
Posts: 41
Joined: Mon Dec 01, 2008 5:02 pm

Post by YoshiMon »

Given that most WAPs don't have RJ45 ports other than normally one it's best to get a wireless router that then can be run in bridge mode.

However given that a wireless network card or USB dongle really aren't that costly why not just get that for the PCs since your PS3 already has built in wireless. Would save you the hassle of setting up a bridge.
User avatar
morbidpete
Posts: 7283
Joined: Sat Mar 30, 2002 12:00 pm
Location: W. Warwick RI

Post by morbidpete »

YoshiMon wrote:Given that most WAPs don't have RJ45 ports other than normally one it's best to get a wireless router that then can be run in bridge mode.

However given that a wireless network card or USB dongle really aren't that costly why not just get that for the PCs since your PS3 already has built in wireless. Would save you the hassle of setting up a bridge.
true. Only reason im a supporter of bridg's is each wirless devices cuts into the AP's throughput. So one wireless device feeding multiple pc's would have better performance than 3 wireless devices
Post Reply