Got cable , plz help tweak (>_<)

Get help and discuss anything related to tweaking your internet connection, as well as the different tools and registry patches on the site. TCP Optimizer settings and Analyzer results should be posted here.
Post Reply
User avatar
AMDbeginner
Regular Member
Posts: 120
Joined: Mon Jul 08, 2002 6:18 pm

Got cable , plz help tweak (>_<)

Post by AMDbeginner »

SpeedGuide.net TCP/IP Analyzer


TCP properties for IP =
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705)
Note: Read the Analyzer FAQ if the above is not your IP address.


TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product:

Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 116 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

My modem is a com21, not sure if this is good.
Advertised speeds, 512/256.
my current upload from south america to usa: about 20-24k.
download, from 48-60k, a little jumpy
would changing modem help?
thx
User avatar
mnosteele52
Posts: 11913
Joined: Tue Jul 24, 2001 12:00 pm
Location: Chesapeake, VA

Post by mnosteele52 »

Try the following settings in CableNut:

DefaultReceiveWindow = 65536
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 17520
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17520
MaxConnectionsPer1_0Server = 10
MaxConnectionsPerServer = 8
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster 1.2 to stay spyware FREE. It is an ABSOLUTE MUST that you use BOTH Ad Aware 6.0 & SpyBot 1.2, don't think you are safe with just one of these apps since one will find what the other misses.

7. Make sure you do the faster web page tweak in my Help & Tips link.


:D :cool:
User avatar
AMDbeginner
Regular Member
Posts: 120
Joined: Mon Jul 08, 2002 6:18 pm

Post by AMDbeginner »

would changing modems help?
User avatar
mnosteele52
Posts: 11913
Joined: Tue Jul 24, 2001 12:00 pm
Location: Chesapeake, VA

Post by mnosteele52 »

Not unless you have a specific problem with yours.

:) :D
Post Reply