home network

Networking, Wireless Routers (802.11 a/b/g/n/ac/ax WiFi), NAT, LAN configuration, equipment, cabling, hubs, switches, and general network discussion
Post Reply
User avatar
hoov
Advanced Member
Posts: 571
Joined: Fri Jan 19, 2001 12:00 am

home network

Post by hoov »

I have a work laptop that I would like to bring home and connect to my lan.

Say that my laptop is set to be in the domain " work ". Can I just rename my lan workgroup to "work" and be able to share files?

2 pc's with xp and 1 with 2000. Usernames have been created on each that match each other.

My concern is that the laptop is in a doman and the others are in a workgroup.

Any ideas would be much appreciated.

Thanls.
User avatar
mccoffee
Posts: 13365
Joined: Sat Nov 03, 2001 12:00 pm
Location: Cleveland, Ohio, United States

i think u got the right idea

Post by mccoffee »

yeah it sounds like u got the right ideal with workgroup as work
also click on networking help in my sig there is alot of good info that might or might not help u out
Comptia a+ n+
User avatar
YeOldeStonecat
SG VIP
Posts: 51171
Joined: Mon Jan 15, 2001 12:00 pm
Location: Somewhere along the shoreline in New England

Post by YeOldeStonecat »

Not a problem. With Win2K/XP, the laptop will still be able to keep the domain logon settings, and you can log on fine, because NT cache's logon security locally (will just tell you no domain server is available, and naturally any mapped drives you normally have at the office will be shown with a red X and unavailable).

As for TCP/IP settings, if they run DHCP at the office, and at home you have a router that runs DHCP...again, you're fine. If you have a fixed TCP setup at the office, then you'll have to adjust your home LAN to match that scope.

If you have DHCP at the office, and nothing at home to run DHCP...then..hmmm, you'll have a harder time. But there is an excellent program for laptop "road warriers" who face some awkward setups, it's called NetSwitcher.

http://www.netswitcher.com/

Creates various network profiles you can pre-set...and choose.

Afterthought....you could also, if you don't internet connection share at home, simply setup your network at home using NetBEUI....that way if your TCP/IP is difficult to adjust on the laptop due to the office LAN, you don't need to touch it.

This is all taking into consideration....that they don't have policies locking down any tampering with the laptop (meaning you're able to be a local administrator).
MORNING WOOD Lumber Company
Guinness for Strength!!!
User avatar
hoov
Advanced Member
Posts: 571
Joined: Fri Jan 19, 2001 12:00 am

Post by hoov »

Thanks for all the help guys.
Post Reply