Anything related to hardware (CPU/MoBo/Video/FSB/BIOS, etc.), hardware settings, overclocking, cooling, cool cases, case mods, hardware mods, post pics of your unique creations here.
IM Trying to fix this pc dell l550 p3 550mhz 128 ram, the orginal hd crash so
I replaced with 10 hd blank, as soon the pc powers up the error "NTLDR is missing" press any key to restart, which keep repeating the same message.
I already check all cables & connections & ok, also im able to access the bios system. help???????
I had this problem when i first installed winxp on my hdd. I originally had win2k on it and i used the same particians. Well i formatted completely and repartitioned, then reinstalled windows xp and its good to go. Do some google searches they have tons of "FIXES" for the problems....
****************************************************************************************
Abit NF7-S 2.0, Barton 2500+ @ 2.2 Ghz, 2 Gig ddr3200, 80gig Seagate HDD, ATI x850 PRO @ 550/600, WinXP Pro
gundamblade2 wrote:previous hd was already formartted, no os at all
Ok, that's why ntldr is missing. ntldr is a file loaded by the windows install, and is needed to boot to windows.
You'll have to install windows. Put the Windows CD in and reboot. Follow instructions from there.
If it doesn't boot to the CD and start the windows install, you may have to enter the bios setup and arrange the boot order to have the CDRom boot as first boot device.
gundamblade2 wrote:i thought when putting the xp disk on the d: & reboot sys, the disk automatically install the xP?
It will, if the CD is a bootable CD, the CDRom on your system is a boot device, and your bios supports booting to CD.
But in the BIOS setup you have to have it boot to CD as first boot device.
When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.
thanks for the web site, i was able to find the problem, & xp is installing as we speak, however i encounter a new problem during the installation, the new error asking for the I386 files. i already press enter & still wont read he files