I get about 2700/230 on speedtests... any tweaking help would be greatly appreciated- you guys already contribute so much consistently and I thank you for that.Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7) Gecko/20040430 Firefox/0.8.0+
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 52 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
Tweaking help appreciated
-
Simulate030
- Member
- Posts: 30
- Joined: Sun Mar 30, 2003 6:26 pm
Tweaking help appreciated
I recently got upgraded to 3mb/256, courtesy of Charter... WinXP, 866mhz P3, 256 mb ram.
Try these settings in the TCPOptimizer:
Settings tab:
select - cable
check - custom settings
network adapter selection - your NIC
check modify all adapters
maxmtu - 1500
TTL - 64
TCP Receive Window leave blank
MTU Discovery - yes
Black Hole Detect - no
Selective Acks - yes
Max Dup ACKs - 2
TCP 1323 Options - check Windows Scaling only
Other Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
Lan Browsing Speedup - optimized
Then select "Apply Changes" and reboot to take effect.
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in my Help & Tips link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall or Sygate Firewall, both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates.
Settings tab:
select - cable
check - custom settings
network adapter selection - your NIC
check modify all adapters
maxmtu - 1500
TTL - 64
TCP Receive Window leave blank
MTU Discovery - yes
Black Hole Detect - no
Selective Acks - yes
Max Dup ACKs - 2
TCP 1323 Options - check Windows Scaling only
Other Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
Lan Browsing Speedup - optimized
Then select "Apply Changes" and reboot to take effect.
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in my Help & Tips link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall or Sygate Firewall, both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates.
Comptia a+ n+