Page 1 of 1
Floppy Drive Fail
Posted: Tue Sep 18, 2001 5:43 pm
by livewyer
I have checked the cable and even tried a different floppy drive, but i still get a floppy drive fail message when i boot up. I also made sure the settings are correct. Any suggestions would be greatly appreciated.
Posted: Tue Sep 18, 2001 6:18 pm
by oakfan52
what about the cable?
Posted: Tue Sep 18, 2001 9:34 pm
by Brent
replace the cable and make SURE it's plugged in the correct way
Posted: Wed Sep 19, 2001 12:16 pm
by Bullwyn
Sounds like the floppy controller chip on the motherboard is at fault.
Try clearing the cmos/bios, if that fails u may need to get a new board
Posted: Thu Sep 20, 2001 6:47 am
by Storm90
After you do as was suggested make sure the floppy is turn on in the bios. Someone may have turned it off by accident. But I would rather think its your cord. GoodLuck!
