speedguide.net  

TP-Link Archer MR200

details: AC750 Wireless Dual Band 4G LTE Router
hardware type: Mobile Router (3G, 4G, 5G)
date added: 2016-01-23
Take full advantage of 4G LTE network with the Archer MR200, which can achieve download speeds of up to 150Mbps.

The 4G LTE router creates a simultaneous dual band Wi-Fi network that can deliver data at speeds of up to 733Mbps. The two distinct wireless networks, utilizing the 2.4GHz and 5GHz bands, provide optimized performance and minimize signal interference.

With an integrated 4G LTE modem and a built-in SIM card slot, all you need to do insert a SIM card and turn on the Archer MR200.

With the inclusion of the WAN/LAN port, the Archer MR200 can also support a wide variety of connection types, including cable, fiber, and DSL modems.
 
 
 
 Archer MR200 Features
 General
 Availability: currently available
 Street price: $158
 LAN / WAN Connectivity
 WAN throughput: 150 Mbps
 WAN ports: 1
one of the LAN ports can be used as a WAN port
 WAN port(s) type: SIM card slot
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 750 Mbps (Wi-Fi 5)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless bridge (PtP)
 internal antenna(s): 3
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Receiver Sensitivity: -76 dBm
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 3G UMTS HSPA: DC-HSPA+/HSPA+/HSPA/UMTS (900/2100MHz)
 4G LTE: FDD-LTE Cat4 (800/900/1800/2100/2600MHz); TDD-LTE (2300/2600MHz)
 VPN
  IPSec
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 10
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.1
 Alternate Admin URL: http://tplinkmodem.net
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 IPv6 support: yes
 Links
 Product page: http://www.tp-link.com/en/products/detai...
 Datasheet: http://www.tp-link.com/res/down/doc/Arch...
 Manual: http://www.tp-link.com/res/down/doc/Arch...
 Quick Install Guide: http://www.tp-link.com/res/down/doc/Arch...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About