W300A Features |
General
|
Availability: |
currently available
|
LAN / WAN Connectivity
|
WAN ports: |
0 |
LAN ports: |
1 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
DHCP client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES)
|
WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode
|
external antenna(s): |
3 |
ext antenna(s) removable ?: |
|
Antenna gain: |
3 dBi |
Transmit Power: |
+18 dBm |
Receiver Sensitivity: |
-73 dBm |
Default SSID: |
Tenda |
WDS compatible: |
|
WMM (QoS): |
|
WMM-PS (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
Device Management
|
Default IP address: |
192.168.0.254 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Event log: |
|
Diagnostic functions: |
ping |
Misc hardware info
|
SNMP support: |
SNMP v.2
|
Power over Ethernet (PoE): |
|
Links
|
Product page: |
http://www.tenda.cn/tendacn/Product/show... |
Manual: |
http://www.tenda.cn/pdtData/update_en/Us... |