Port 68 Details
known port assignments and vulnerabilities
5 records found
||Bootstrap protocol client. Used by client machines to obtain dynamic IP addressing information from a DHCP server.
The Avaya 4602 SW IP Phone (Model 4602D02A) with 2.2.2 and earlier SIP firmware allows remote attackers to cause a denial of service (device reboot) via a flood of packets to the BOOTP port (68/udp).
References: [CVE-2007-3321] [SECUNIA-25747] [OSVDB-38117]
NCP Secure Enterprise Client (aka VPN/PKI client) 8.30 Build 59, and possibly earlier versions, when the Link Firewall and Personal Firewall are both configured to block all inbound and outbound network traffic, allows context-dependent attackers to send inbound UDP traffic with source port 67 and destination port 68, and outbound UDP traffic with source port 68 and destination port 67.
Apple NetBoot also uses this port.
||Backdoor.SubSeven [Symantec-2001-020114-5445-99] (1999.06.06)
Falco LX-4PRO also uses this port.
||Bootstrap Protocol (BOOTP) Client; also used by Dynamic Host Configuration Protocol (DHCP) (official)
||DHCP/Bootstrap Protocol Client
||Bootstrap Protocol Client
Related ports: 67
« back to SG Ports
SANS Internet Storm Center: port 68
Port numbers in computer networking represent communication endpoints. Ports are unsigned 16-bit integers (0-65535) that identify
a specific process, or network service. IANA is responsible for internet protocol resources, including the registration of commonly
used port numbers for well-known internet services.
Well Known Ports: 0 through 1023.
Registered Ports: 1024 through 49151.
Dynamic/Private : 49152 through 65535.
TCP ports use the Transmission Control Protocol, the most commonly used protocol
on the Internet and any TCP/IP network. TCP enables two hosts
to establish a connection and exchange streams of data. TCP guarantees delivery of data
and that packets will be delivered in the same order in which they were sent.
Guaranteed communication/delivery is the key difference between TCP and UDP.
UDP ports use the Datagram Protocol. Like TCP, UDP is used in combination with IP (the Internet Protocol)
and facilitates the transmission of datagrams from one computer to applications on another computer,
but unlike TCP, UDP is connectionless and does not guarantee reliable communication; it's up to the application that received
the message to process any errors and verify correct delivery. UDP is often used with time-sensitive
applications, such as audio/video streaming and realtime gaming, where dropping some packets is preferable to waiting for delayed data.
When troubleshooting unknown open ports, it is useful to find exactly what services/processes are listening to them.
This can be accomplished in both Windows command prompt and Linux variants using the "netstat -aon" command.
We also recommend runnig multiple anti-virus/anti-malware scans to rule out the possibility of active malicious software.
For more detailed and personalized help please use our forums.
Please use the "Add Comment" button below to provide additional information or comments about port 68.